• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 세계 도시지반공학 심포지엄
• /
• pp.891-898
• /
• 2009

A high rock embankment by means of dynamic compaction has hardly carried out in domestic area. For the successful accomplishment of such a high rock embankment, construction quality and measurement control are conducted. Plate loading tests are carried out to verify the bearing capacity and safety against the long term settlement. In addition, settlement of each layer is measured in order to verify the effect of dynamic compaction and to predict long term settlement.

• 한국도로학회논문집
• /
• 제19권2호
• /
• pp.67-74
• /
• 2017

PURPOSES : The objective of this study is to ascertain the curing period of cementless cold central plant recycled asphalt base-layer, using mechanical analyses and specimen quality tests on the field. METHODS : Cold central plant recycled asphalt base-layer mixture was produced in the plant from reclaimed asphalt, natural aggregate, filler for the cold mix, and the modified emulsion AP using asphalt mix design and plant mix design. In order to examine the applicability of the curing period during the field test, the international standards for the possibility of core extraction and the degree of compaction and LFWD deflection were analyzed. Moreover, Marshall stability test, porosity test, and indirect tensile strength test were performed on the specimens of asphalt mix and plant mix design. RESULTS : The plant production process and compaction method of cementless cold central plant recycled asphalt base-layer were established, and the applicability of the optical moisture content for producing the mixture was verified through the field test. In addition, it was determined that the core extraction method of the conventional international curing standard was insufficient to ensure performance, and the LFWD test demonstrated that the deflection converges after a two-day curing. However, the back-calculation analysis reveals that a three-day curing is satisfactory, resulting in a general level of performance of dense asphalt base-layer. Moreover, from the result of the specimen quality test of the asphalt mix design and plant mix design according to the curing period, it was determined that the qualities satisfied both domestic and international standards, after a two-day curing. However, it was determined that the strength and stiffness after three-day curing are higher than those after a two-day curing by approximately 3.5 % and 20 %, respectively. CONCLUSIONS:A three-day curing period is proposed for the cementless cold central plant recycled asphalt base-layer; this curing period can be demonstrated to retain the modulus of asphalt-base layer in the field and ensure stable quality characteristics.

• 한국지반신소재학회논문집
• /
• 제21권4호
• /
• pp.1-12
• /
• 2022

토공사에서 다짐품질관리를 위해 일반적으로 평판재하시험 및 현장밀도시험 등이 실시되며, 다짐확인을 위한 추가 분석이 동반된다. 최근 IoT(Internet of Things) 기반의 디지털 환경이 조성되면서 스마트 다짐품질관리가 가능한 DCPT(Dynamic Cone Penetration Test) 장비가 개발되었고, 이러한 디지털 DCPT 시스템은 실시간 다짐에 대한 위치·시간정보와 작업자의 이력관리가 가능하게 되었다. IoT 기반의 DCPT 시스템은 기존의 다짐품질시험의 시간적·비용적 단점을 개선하고 현장에서 유연하게 적용가능하게 되었으며, 현장다짐 지표인 DPI(Dynamic Cone Penetration Index)의 기록과 저장이 자동화 되었다. 본 연구에서는 이러한 DCPT 장비를 현장 적용하여, 현장 적용 데이터인 DPI를 통해 다짐강도의 경향을 확인하였다. 그 결과 최종다짐에서 초기다짐의 DPI보다 1.4배 감소하여 지표에서 10~14cm 깊이인 노상 다짐층의 다짐강도 증가를 확인할 수 있었으며, 다짐결과비교를 위한 평판재하시험의 지지력 계수의 경향과 동일하게 최종 다짐시 다짐강도 증가경향을 확인할 수 있었다. 또한 기존 아날로그 DCPT의 경우가 아닌 IoT DCPT장비를 사용하므로 인원 및 시간을 저감한 시험수행이 가능하였으며 측정데이터의 스마트기기 전송을 통해 다짐정보의 실시간 확인이 가능하게 되었다. 이러한 스마트 기능이 추가된 IoT 기반 DCPT장비를 통해 DPI로 실시간 다짐관리 가능성을 확인할 수 있었으며, DPI에 대한 국내 다짐 재료 및 실내시험조건에 대한 추가연구와 평판재하시험과의 상관성에 대한 연구가 지속적으로 이루어진다면 다짐관리 및 확인 용도로 IoT 기반 DCPT장비가 폭넓게 활용될 수 있을 것이라 판단된다.

• Geomechanics and Engineering
• /
• 제16권1호
• /
• pp.71-83
• /
• 2018

Compacted bentonites were chosen as the backfill material and buffer in high level nuclear waste disposal due to its high swelling pressure, high ion adsorption capacity and low permeability. It is essential to estimate the swelling pressure in design and considering the safety of the nuclear repositories. The swelling pressure model of expansive clay colloids was developed based on Gouy-Chapman diffuse double layer theory. However, the diffuse double layer model is effective in predicting low compaction dry density (low swelling pressure) for certain bentonites, and invalidation in simulating high compaction dry density (high swelling pressure). In this paper, the new relationship between nondimensional midplane potential function, u, and nondimensional distance function, Kd, were established based on the Gouy-Chapman theory by considering the variation of void ratio. The new developed model was constructed based on the published literature data of compacted Na-bentonite (MX80) and Ca-bentonite (FoCa) for sodium and calcium bentonite respectively. The proposed models were applied to re-compute swelling pressure of other compacted Na-bentonites (Kunigel-V1, Voclay, Neokunibond and GMZ) and Ca-bentonites (FEBEX, Bavaria bentonite, Bentonite S-2, Montigel bentonite) based on the reported experimental data. Results show that the predicted swelling pressure has a good agreement with the experimental swelling pressure in all cases.

• 농업과학연구
• /
• 제10권2호
• /
• pp.292-309
• /
• 1983

성토(盛土)의 현장(現場)다짐에서 토질(土質)의 종류(種類), 층(層)의 두께 및 전압회수(轉壓回數)를 변화(變化)시키면서 진동(振動)과 무진동(無振動)의 전압기계(轉壓機械)로 다진 효과(效果)를 비교(比較)하기 위(爲)하여 들밀도 시험(試驗) 및 현장(現場)C.B.R.시험(試驗)을 하여 다음과 같은 결론(結論)을 얻었다. 1. 전압회수(轉壓回數)가 적을 때는 진동(振動)다짐이 무진동(無振動) 다짐 보다 다짐 효과(效果)가 크게 나타났으며 전압회수(轉壓回數)가 커지면 진동(振動)과 무진동(無振動) 다짐의 다짐률의 차(差)가 작아지는 경향(傾向)을 나타냈다. 2. 현재(現在) 사용(使用)하고 있는 대형화(大型化)된 전압장비(轉壓裝備)로 3~5회(回) 전압(轉壓)하면 A-1다짐의 기준에 도달(到達)하므로 앞으로는 대형화(大型化)된 장비(裝備)에 대비(對備)하기 위(爲)하여 D-2다짐을 기준으로 함이 바람직 하다고 생각한다. 3. 건조밀도(乾操密度)가 증가(增加)함에 따라 C. B. R. 값이 증가(增加)되나 진동(振動)다짐의 경우가 무진동(無振動)다짐에 비(比)하여 C. B. R. 값의 증가율(增加率)이 크게 나타났다. 4. 전압회수(轉壓回數)가 증가(增加)함에 따라 C. B. R. 값의 증가(增加)현상은 완만(緩晩)하게 나타나고 C. B. R 값은 진동(振動)다짐에서 무진동(無振動)다짐보다 약 20%정도 더 큰 값을 나타냈다. 5. C-5 시료(試料)에서는 다짐두께가 증가(增加)할수록 다짐률이 감소(減少)하여 다짐두께가 20~30cm로 변(變)할 때 다짐률은 완만(緩慢)하게 감소(減少)되었으나 30~40cm로 변(變)할 때는 다짐률이 급격(急擊)히 떨어졌으므로 전압층(轉壓層)의 두께는 30cm 이하(以下)로 함이 바람직하다고 생각한다.

• 한국농공학회지
• /
• 제28권4호
• /
• pp.66-76
• /
• 1986

This study was attempted to investigate the effects of delayed compaction on the unconfined compressive strengh and dry density of Soil-cement mixtures. Soil-cement construction is a time-consuming procedure. Time-delay is known as a detrimental factor to lower the quality of soil-cement layer. A laboratory test was performed using coarse and fine weathered granite soils. The soils were mixed with 7% cement at optimum moisture content and excess moisture content in part. Socondary additives such as lime, gypsum-plaster, flyash and sugar were tried to counteract the detri-mental effect of delayed compaction. The specimens were compacted by Harvard Miniature Compaction Apparatus at 0,1,2,4,6 hors after mixing. Two kinds of compactive efforts(9 kgf and 18 kgf tamper) were applied. The results were summarized as follows: 1.With the increase of time delay, the decrease rate of dry density of the specimen compacted by 9 kgf tamper was steeper than that of the specimen compacted by 18kgf tamper. In the same manner, soil-B had steeper decreasing rate of dry density than soil-A. 2.Based on the results of delayed compaction tests, the dry density and unconfined compressive sterngth were rapidly decreased in the early 2 hours delay, while those were slowly decreased during the time delay of 2 to 6 hours. 3.The dry density and unconfined compressive strength were increased by addition of 3% excess water to the optimum moisture content during the time delay of 2 to 6 hours. 4.Without time delay in compaction, the dry densities of soil-A were increased by adding secondary additives such as lime, gypsum-plaster, flyash and sugar, on the other hand, those of soil-B were decreased except for the case of sugar. 5.The use of secondary additives like lime, gypsum-plaster, flyash and sugar could reduce the decrease of unconfined compressive strength due to delayed compaction. Among them, lime was the most effective. 6.From the above mentioned results, several recommendations could be suggested in order to compensate for losses of unconfined compressive strenght and densit v due to delayed compaction. They are a) to use coarse-grained granite soil rather than fined-grained one, b) to add about 3% excess compaction moisture content, c) to increase compactive effort to a certain degree, and d) to use secondary additives like line gypsum-plaster, flyash, and sugar in proper quantity depending on the soil types.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 세계 도시지반공학 심포지엄
• /
• pp.1472-1477
• /
• 2009

매립지반이 주로 사질토로 구성되어 있거나 호박돌을 많이 함유하고 있는 지반이나 쓰레기 매립지반에서는 시공속도가 매우 빠르고 경제적 측면을 고려한 동다짐공법이 많이 적용되고 있다. 본 연구에서는 대구서부화물역 건설공사의 쓰레기 매립층에 적용된 동다짐공법에 대하여 지반개량효과를 분석하였다. 그 결과 중추낙하다짐 적용구간에 N치는 6.5/30에서 22.5/30으로 약 349% 증가하였다. 다짐전과 후의 지반고 측정결과 중추낙하다짐공법 적용구간은 0.706~1.729m가 침하되었다. 중추낙하다짐에 의한 $\alpha$값은 0.25~0.48로 폐기물층에 대한 일본토질공학회(1987)의 연구결과(0.3~0.5) 및 광산폐기물에 대한 Lukas(1986)의 연구결과(0.35~0.4)와 유사한 범위를 보이고 있다.

• 한국지반환경공학회 논문집
• /
• 제11권4호
• /
• pp.51-59
• /
• 2010

본 연구는 준설 매립된 느슨한 상태의 실트질 사질토층이 얕게 분포해 있는 지역에 건물 조성 및 건축물 시공을 위한 기초설계사례에 관한 연구로, 연구 대상지는 군산, 인천지역의 준설 매립지로 심도 E.L(-)10m 전후에 느슨한 실트질 사질토층이 분포해 있으며, 하부 말뚝기초의 지지층은 E.L(-)20m 전후로 출현하고 있어 얕은 기초공법 적용 시 기초지반 보강을 위한 지반개량이 필요한 지역이다. 따라서 이에 적용 가능한 기초처리 공법들을 비교 검토한 결과 구역별 설계하중 조건을 고려하는 동다짐 공법이 가장 적합한 공법으로 선정되었다. 본 연구에서는 이를 검증하기 위한 방법으로 현장시험시공을 통해 시공결과에 대한 확인시추조사 및 평판재하시험 등을 실시하여 지반개량효과를 분석하였으며, 동다짐 공법에 의해 지지력에 대한 안정성이 확보됨을 확인하였다.

• Restorative Dentistry and Endodontics
• /
• 제17권2호
• /
• pp.365-382
• /
• 1992

The purpose of this study was to evaluate the adaptation of filling material to the dentinal walls of root canals with and without smear layer. Fifty extracted upper and lower anterior teeth were selected, and the root canals were instrumented with K - files 1mm short of the apical foramen by step - back method. The teeth were randomly divided into two groups of 25 each : in the group I, smear layers were not removed, and in the group II, smear layers were removed by 15% EDTA solution. Again the two groups 25 teeth were randomly divided into unfilled contol group and filling groups(lateral, ultrasonic, ULTRAFIL, McSpadden compaction group). Upon completion of root canal filling, the teeth were grooved on the both the labial and lingual surfaces and then split with mallet and chisel. Each specimens were examined with JSM - 840 Scanning Electron Microscope (JEOL., Japan). The results were as follows : 1. In the contol group, dentinal tubules of group I couldn't be distinguished in the canal wall, but those of group II appeared to be open and patent. 2. In the filling groups of group I, the tubular penetration of the sealer or gutta percha couldn't be seen, but in the filling groups of group II, it could be seen except McSpadden compaction group. 3. In the filling groups, ULTRAFIL group showed the best adaptation of filling material to root canal wall among the group I, and lateral and ultrasonic condensation group showed the best adaptation of filling material among the group II. McSpadden compaction group showed the worst adaptation in group I, II. 4. Generally, the group II showed better adapation of filling material to root canal wall than the group I.

• 한국분말재료학회지
• /
• 제21권1호
• /
• pp.39-43
• /
• 2014

Bulk nanostructured copper was fabricated by a shock compaction method using the planar shock wave generated by a single gas gun system. Nano sized powders, average diameter of 100 nm, were compacted into the capsule and target die, which were designed to eliminate the effect of undesired shock wave, and then impacted with an aluminum alloy target at 400 m/s. Microstructure and mechanical properties of the shock compact specimen were analyzed using an optical microscope (OM), scanning electron microscope (SEM), and micro indentation. Hardness results showed low values (approximately 45~80 Hv) similar or slightly higher than those of conventional coarse grained commercial purity copper. This result indicates the poor quality of bonding between particles. Images from OM and SEM also confirmed that no strong bonding was achieved between them due to the insufficient energy and surface oxygen layer of the powders.