Acknowledgement
This research was supported by the Ministry of Land, Infrastructure and Transport of the Korean government (Project Number: 21SMIP-A157130-02).
References
- ASTM D6951-03 (2003), "Standard Test Method for Use of the Dynamic Cone Penetrometer in Shallow Pavement".
- Burnham, T. R. (1997), "Application of the dynamic cone penetrometer to Minnesota department of transportation pavement assessment procedures (No. MN/RC-97/19)", Minnesota. Department of Transportation.
- Davich, P., Camargo, F., Larsen, B., Roberson, R. and Siekmeier, J. (2006), "Validation of DCP and LWD moisture specifications for granular materials (No. MN/RC-2006-20)", Minnesota. Department of Transportation.
- Edill, T. B. and Benson, C. H. (2005), "Investigation of the DCP and SSG as Alternative Methods to Determine Subgrade Stability", Department of Civil and Environmental Engineering, University of Wisconsin-Madison.
- Harison, J. R. (1987), "Correlation Between California Bearing Ratio and Dynamic Cone Penetrometer Strength Measurement of Soils", Proc. Instn. of Civ. Engrs., London, Part2, pp.83-87.
- Kim, D. H. and Bae, K. H. (2021), "Developing DCPT System based on IoT and Field Demonstration for Smart Construction of Earthwork". Journal of the Korea AcademiaIndustrial cooperation Society, Vol.22, No.11 pp.488-498.
- Kim, K. S. (2015), "Comparison of Elastic Moduli of Subgrade Soils Using Plate Loading Test", Soil Stiffness Gauge and Dynamic Cone Penetrometer. Journal Of Korean Geotechnical Society, Vol.31, No.3, pp.63-72. https://doi.org/10.7843/KGS.2015.31.3.63
- Kleyn, E. G. (1975), "The Use of The Dynamic Cone Penetrometer(DCP)", Transvaal Road Department. Report 2/74.
- Ministry of Land, Transport and Maritime Affairs (2011), "Temporary Guidelines for Pavement Lower Structural", Resolutions Management, p.56. (in Korean)
- National Cooperative Highway Research Program (2004), "Guide for mechanistic-empirical design of new and rehabilitated pavement structures. Part 2, Design inputs", Final Rep., No. NCHRP 1-37A, Washington, D.C.
- Oh, B. T., Choi, J. S. and You, K. H. (2019), "Evaluation of Subgrade Compaction Degree Using Dynamic CPT", Korean Society of Road Engineering, Vol.21, No.6, pp.85-95.
- Park, H. G. and Bae, K .H (2020), "Development of DCPT Equipment based on IoT for Rod Tamping in Smart Construction", Journal of the Korea Academia-Industrial cooperation Society, Vol.21, No.11 pp.501-509. https://doi.org/10.5762/KAIS.2020.21.11.501
- Park, J. W. and Yoon, W. G. (2019), "3D Geospatial Information Model based Smart Construction System in Earthwork", Journal of the Korean Society of Civil Engineers, Vol.67, No.11, pp.20-27.
- Seo, J. W., Gang, T. G. and Choe, C. H. (2020), "Automation Technology and Control Technology of Construction Equipment", Construction Engineering and Management, Vol.21, No.4, pp.4-10.
- Siekmeier, J., Pinta, C., Merth, S., Jensen, J., Davich, P., Camargo, F. F., and Beyer, M. (2009), "Using the dynamic cone penetrometer and light weight deflectometer for construction quality assurance (No. MN/RC 2009-12)", Minnesota. Dept. of Transportation. Office of Materials and Road Research.
- Smith, R. B. and Pratt, D. N. (1983), "A field study of in situ California bearing ratio and dynamic cone penetrometer testing for road subgrade investigations", Australian Road Research, 13(4).
- Webster, S. L., Grau, R. H. and Williams, T. P. (1992), "Description and application of dual mass dynamic cone penetrometer", Geotechnical Laboratory (US).
- Wu, S. and Sargand, S. (2007), "Use of dynamic cone penetrometer in subgrade and base acceptance (No.FHWA/ODOT-2007/01)", Ohio Research Institute for Transportation and the Environment.
- Youn, I. R. and Oh. S.W. (2013), "Estimate of the Bearing Capacity on Subbase and Subgrade with Dynamic Plate Bearing Test", Journal of the Korean Geo-Environmental Society, Vol.14, No.8, pp.53-60. https://doi.org/10.14481/jkges.2013.14.12.053