• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.8
• /
• pp.45-53
• /
• 1999

Electromagnetic scattering by finite number of conducting strips loaded on a grounded dielectric is considered for the TM polarization case from the viewpoints of transmitting(receiving) leaky wave antenna and grating coupler. An integro-differential equation whose unknowns are the induced currents over the strips is derived and solved by use of the method of moments. In order to construct the non-uniform leaky wave structures with specific source(current) distributions over the strips, distances between two adjacent strips and strip width are simultaneously varied along the structure. From some results for the current distributions over the strips and surface wave powers, it is observed that the maximum coupling efficiencies of the appropriately constructed non-uniform leaky wave structures from the viewpoints of both a receiving leaky wave antenna and a grating coupler amount upto 95%, which are about 15% improvements compared with those(80%) of the uniform structures.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.1
• /
• pp.155-161
• /
• 2007

This paper presents the design simulation, implementation, and measurement of a miniaturized PCS / Satellite DMB dual-band stacked mompole antenna with a parasitic patch for mobile communication terminals. A stacked helix is realized by using a via hole with height of 0.4 mm and a diameter of 0.35 mm to connect upper- and lower-layer helix sections for a reduction of the dimensions of the antenna. In addition the stacked helix chip antenna is interleaved with a parasitic patch to achieve two different radiation modes. The ratio of the first frequency and the second frequency vary with the geometrical parameter of the parasitic patch. The fabricated antenna uses FR-4 substrate with a relative permittivity of 4.2. Its dimensions are $15.5{\times}7.6{\times}0.4 mm^3$. The measured impedance bandwidths (VSWR<2) are 240 and 250 MHz at the operating frequencies, respectively.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.43 no.3
• /
• pp.191-203
• /
• 2020

This study aims to present the differentiating factors of B2B salesperson competency through comparing the suppliers and buyers in Korean steel industry in their perception on the importance and priority of B2B salesperson competency. Based on previous studies, analysis on B2B salesperson competency has been analyzed using the B2B salesperson performance competency measure factors and appropriately reorganizing them for better application to the steel industry. The required performance competencies of B2B salesperson can be categorized into 3 different types, namely social exchange competency, advisory sales competency, and skill & knowledge competency. AHP analysis was performed for analyzing the relative importance of B2B salesperson competency based on the factors of previous studies, in which categorization of the aforementioned types had been done. As the result, first, it has been confirmed that there is a difference in 1st layer main factors between the supplier group and buyer group. The supplier group valued the advisory sales competency, while the buyer group valued skill & knowledge competency. Second, it has been proved that there is same result of relative importance in 2nd detailed factors between the supplier group and buyer group. Both group confirmed that customer member, identify customer needs and communication skill are very important factors. Third, as the result of analysis on the gap between B2B salesperson competency of the suppliers and buyers, the gap in the product knowledge and sales team member need improvement for buyer's satisfaction according to overall results of relative importance and priority. The steel supplier was able to develop B2B salesperson competency according to the buyers' needs based on the result of this study, and furthermore it is expected that this study will be able to contribute to increase in buyer competitiveness through differentiation in B2B salesperson competency.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.29 no.12
• /
• pp.61-67
• /
• 2015

Certainly, we are living in a true mobile society. At the end of 2014, approximately 40million 560thousand people are subscribed to smartphone services in Korea, using more than 2000MB of mobile data per a person. The use of smartphone is expected to increase. Moreover, smartphone moves toward becoming a requisite for modern people. Under the circumstances, high-speed communication services such as LTE provide high quality services anywhere and anytime and, furthermore, the development of high performances of the application makes the life patterns of modern people link directly to smartphone. Almost every day, new creative services are being introduced and the demands of on-line streaming services such as high-performance game and YouTube are increasing day after day. However, although smartphones are getting smarter and high quality services are rapidly growing, consumers still complain about the insufficient usage time caused by the capacity of batteries. In order to solve this problem, this thesis suggests EDLC(Electric Double-Layer Capacitor) uses as a supplemental power supply to keep the continuity of work while switching batteries. Through this approach, the running time of smartphone becomes longer as the number of batteries without power off and the purpose of this study is to maximize the convenience of using smartphone by eliminating the initialization of memories and the loss of time of rebooting while batteries are switched.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.7
• /
• pp.1480-1487
• /
• 2004

This study is proposed the novel gesture recognition method for the remote camera robot control. To recognize the dynamics gesture, the preprocessing step is the image segmentation. The conventional methods for the effectively object segmentation has need a lot of the cole. information about the object(hand) image. And these methods in the recognition step have need a lot of the features with the each object. To improve the problems of the conventional methods, this study proposed the novel method to recognize the dynamic hand gesture such as the MMS(Max-Min Search) method to segment the object image, MSM(Mean Space Mapping) method and COG(Conte. Of Gravity) method to extract the features of image, and the structure of recognition MLPNN(Multi Layer Perceptron Neural Network) to recognize the dynamic gestures. In the results of experiment, the recognition rate of the proposed method appeared more than 90[%], and this result is shown that is available by HCI(Human Computer Interface) device for .emote robot control.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.4
• /
• pp.809-816
• /
• 2010

This paper proposed about a load-balanced multi-agent model in mobile distribution environment to monitor moving patients and to deal with a situation of emergency. This model was designed to have a structure based on distribution framework by expanding a mobile system, and provides healthcare services based on real time situational information on moving patients. In order to overcome the limitation of middleware when we design system, we provided an abstract layer between applications and their base network infrastructure so that balance between QoS requests and network life can be maintained. In addition, clustering was used in cells for the efficient load distribution among multi-agents. By using Clustering FCM, we got optimal resources and had solve about transmission delay.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.10
• /
• pp.1935-1940
• /
• 2016

This paper proposes a phase-locked loop (PLL) to minimize the loop filter output voltage fluctuation by using a comparator including RC time constant circuits. The voltage variation of loop filter is inputted to RC time constant circuits which have two RC time constants, large and small. While a small RC time constant circuit quickly conveys the output voltage variation of loop filter, a large RC time constant circuit conveys slowly the output voltage variation of loop filter and its output looks like constant voltage. The output signal of the comparator controls the sub charge pump and reduces the input voltage variation of voltage-controlled oscillator (VCO). Therefore, the proposed PLL generates a phase noise reduced signal. It has been designed with a 1.8V supply voltage, 0.18um multi - metal and multi - poly layer CMOS process and proved by Hspice simulation.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.1
• /
• pp.117-124
• /
• 2018

Junctionless amorphous InGaZnO thin film transistors with different film thickness have been fabricated. Their device performance parameters were extracted and gate oxide breakdown voltages were analyzed with different film thickness. The device performances were enhanced with increase of film thickness but the gate oxide breakdown voltages were decreased. The device performances were enhanced with increase of temperatures but the gate oxide breakdown voltages were decreased due to the increased drain current. The drain current under illumination was increased due to photo-excited electron-hole pair generation but the gate oxide breakdown voltages were decreased. The reason for decreased breakdown voltage with increase of film thickness, operation temperature and light intensity was due to the increased number of channel electrons and more injection into the gate oxide layer. One should decide the gate oxide thickness with considering the film thickness and operating temperature when one decides to replace the junctionless amorphous InGaZnO thin film transistors as BEOL transistors.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.1
• /
• pp.135-145
• /
• 2000

Manufacturing Message Specification (MMS) is designed as a communication standard protocol, ISO/IEC 9506, on factory automation for messaging between heterogeneous programmable unit controller, PLC, NC, Robot, of different vendors on the networks. MMS is also a standard protocol of OSI reference model application layer, In this paper, we show an implementation of MMS over TCP/IP using ANSI-C programming language on the unix environment, and make java classification using java native interface (NJI) with MMS library. The use of java classification provides a basic environment ot overcome a difficult programming with different MMS application programming interface (MMS-I) which requires a siklled programming technique of graphic user interface (GUI). In this paper, we implement a MMS application program of the automated assembly model for printed circuit board based on WWW which shows the operation, control and monitoring of real manufacturing device (RMD) with web browser providing users for consistent user interface.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.3
• /
• pp.775-791
• /
• 1997

This paper describes Real-Time Trasport Protocol(RTTP) that procisdes for a ; user cmnnection-oriented sercices with performance fuarantee.Assuming that eral-time network services will be provided,RTTP solves provlems at end-hosts.RTTP has defined a new set of primitives for real-time communication servies based on the analysis of uwer requirements on various applications.Introducing the notion of Abstract Network Layer independent of real networks.RTTP's implementation scheme can be applied to various netwoeks.The study also intriduces an inplemenation strategy, provide prdeictability of protocol processing time,wich should be known a priori for performance guarantee.Intermally,RTTP has a set of QoS translation rules that change a user'w performance requirements to the equivalent network QoS paramenters.RTTP also introuduces a new apportunistic error control mehtod that can trade-off between overhead and error corredtion according to a uwer's requirement on reliability.