• Title/Summary/Keyword: Common Clock

Search Result 72, Processing Time 0.182 seconds

An adaptive clock recovery utilizing data buffer filling rate (수신 데이타의 버퍼 점유률을 이용한 적응클럭 복원)

  • 이종형;김태균
    • Journal of the Korean Institute of Telematics and Electronics A
    • /
    • v.33A no.3
    • /
    • pp.47-54
    • /
    • 1996
  • In this paper we propose a new timing recovery method by means of utilizing service data filling rate instead of timing information of transmitter. A proposed algorithm controls the phase locked loop in the opposite direction ot data filling rate of FIFO in receiver, and it is based on the fact that average of cell jitters is zero. The proposed method is simple compared with timing information method of transmitter. It can be utilized for timing recovery in synchronous digital hierarchy as well as in plesiochronous digial hierarchy without common reference clocks in end-to-end erminals. We implement the interactive video communication system and test the proposed algorithm. As a result, we hav econfirmed that it yields good perfomrnces in terms of jitters characteristics and hardware complexity.

  • PDF

A Continuously Tunable LC-VCO PLL with Bandwidth Linearization Techniques for PCI Express Gen2 Applications

  • Rhee, Woo-Geun;Ainspan, Herschel;Friedman, Daniel J.;Rasmus, Todd;Garvin, Stacy;Cranford, Clay
    • JSTS:Journal of Semiconductor Technology and Science
    • /
    • v.8 no.3
    • /
    • pp.200-209
    • /
    • 2008
  • This paper describes bandwidth linearization techniques in phase-locked loop (PLL) design for common-clock serial link applications. Utilizing a continuously tunable single-input dual-path LC VCO and a constant-gain phase detector, a proposed architecture is well suited to implementing PLLs that must be compliant with standards that specify minimum and maximum allowable bandwidths such as PCI Express Gen2 or FB-DIMM applications. A prototype 4.75 to 6.1-GHz PLL is implemented in 90-nm CMOS. Measurement results show that the PLL bandwidth and random jitter (RJ) variations are well regulated and that the use of a differentially controlled dual-path VCO is important for deterministic jitter (DJ) performance.

Circadian Rhythms of Melatonin, Thyroid-Stimulating Hormone and Body Temperature: Relationships among those Rhythms and Effect of Sleep-Wake Cycle

  • Kim, Mi-Seung;Lee, Hyun J.;Im, Wook-Bin
    • Animal cells and systems
    • /
    • v.6 no.3
    • /
    • pp.239-245
    • /
    • 2002
  • Plasma melatonin, thyroid-stimulating hormone (TSH) and body temperature were measured simultaneously and continuously before and after the sleep-wake cycle was shifted in 4 healthy males and changes in the circadian rhythm itself and in the phase relationship among these circadian rhythms were determined. Normal sleep-wake cycle (sleep hours: 2300-0700) was delayed by 10 h (sleep hours: 0900-1700) during the experiment. Even after this shift the typical melatonin rhythm was maintained: low during daytime and high during night. The melatonin rhythm was gradually delayed day by day. The TSH rhythm was also maintained fundamentally during 3 consecutive days of altered sleep-wake cycle. The phase was also delayed gradually but remarkably. The daily rhythm of body temperature was changed by the alteration of sleep-wake cycle. The body temperature began to decrease at the similar clock time as in the control but the decline during night awake period was less steep and the lowered body temperature persisted during sleep. The hormonal profiles during the days of shifted sleep/wake cycle suggest that plasma melatonin and TSH rhythms are basically regulated by an endogenous biological clock. The parallel phase shift of melatonin and TSH upon the change in sleep-wake cycle suggests that a common unitary pacemaker probably regulates these two rhythms. The reversal phase relationship between body temperature and melatonin suggests that melatonin may have a hypothermic effect on body temperature. The altered body temperature rhythm suggests that the awake status during night may inhibit the circadian decrease in body temperature and that sleep sustains the lowered body temperature. It is probable but uncertain that there ave causal relationships among sleep, melatonin, TSH, and body temperature.

A Study on the Scalability of Multi-core-PC Cluster for Seismic Design of Reinforced-Concrete Structures based on Genetic Algorithm (유전알고리즘 기반 콘크리트 구조물의 최적화 설계를 위한 멀티코어 퍼스널 컴퓨터 클러스터의 확장 가능성 연구)

  • Park, Keunhyoung;Choi, Se Woon;Kim, Yousok;Park, Hyo Seon
    • Journal of the Computational Structural Engineering Institute of Korea
    • /
    • v.26 no.4
    • /
    • pp.275-281
    • /
    • 2013
  • In this paper, determination of the scalability of the cluster composed common personal computer was performed when optimization of reinforced concrete structure using genetic algorithm. The goal of this research is watching the potential of multi-core-PC cluster for optimization of seismic design of reinforced-concrete structures. By increasing the number of core-processer of cluster, decreasing of computation time per each generation of genetic algorithm was observed. After classifying the components in singular personal computer, the estimation of the expected bottle-neck phenomenon and comparison with wall-clock time and Amdahl's law equation was performed. So we could obseved the scalability of the cluster appear complex tendency. For separating the bottle-neck phenomenon of physical and algorithm, the different size of population was selected for genetic algorithm cases. When using 64 core-processor, the efficiency of cluster is low as 31.2% compared with Amdahl's law efficiency.

Mobile Camera Processor Design with Multi-lane Serial Interface (멀티레인을 지원하는 모바일 카메라용 직렬 인터페이스 프로세서 설계)

  • Hyun, Eu-Gin;Kwon, Soon;Lee, Jong-Hun;Jung, Woo-Young
    • Journal of the Institute of Electronics Engineers of Korea SD
    • /
    • v.44 no.7 s.361
    • /
    • pp.62-70
    • /
    • 2007
  • In this paper, we design a mobile camera processor to support the MIPI CSI-2 and DPHY specification. The lane management sub-layer of CIS2 handles multi-lane configuration. Thus conceptually, the transmitter and receiver have each independent buffer on multi lanes. In the proposed architecture, the independent buffers are merged into a single common buffer. The single buffer architecture can flexibly manage data on multi lanes though the number of supported lanes are mismatched in a camera processor transmitter and a host processor. For a key issue for the data synchronization problem, the synchronization start codes are added as the starting for image data. We design synchronization logic to synchronize the received clock and to generate the byte clock. We present the verification results under proposed test bench. And we show the waves of simulation and logic synthesis results of the designed processor.

Improvement of Loran-C Timing Accuracy by Inland Differential ASF Measurements (내륙 differential ASF 측정을 통한 Loran-C 시각 정확도 향상)

  • Lee, Chang-Bok;Hwang, Sang-Wook;Lee, Jong-Koo;Lee, Young-Kyu;Lee, Sang-Jeong;Yang, Sung-hoon
    • Journal of Navigation and Port Research
    • /
    • v.40 no.1
    • /
    • pp.15-20
    • /
    • 2016
  • In this study we measured a differential ASF to improve the accuracy of time synchronization with the signal transmitted from Pohang 9930M Loran station. We obtained the differential ASF which is calculated from a difference of the TOA measurements between KRISS and Chungnam National University(CNU), and KRISS and National Maritime PNT Office respectively. The TOA measurement at KRISS was measured by UTC(KRIS) reference clock and other sites were measured by atomic clocks respectively. The time variations of differential ASF measurements at CNU and National Maritime PNT Office were within $0.1{\mu}s$ and $0.05{\mu}s$ respectively. And we found the time variations of $0.1{\mu}s$ depending on the surrounding radio-wave environments from the differential ASF measurements of 60 minute moving averages. We can improve the accuracy of time synchronization of the local clock to within 10 ns by compensating the differential ASF through removing the common component of ASF. And we measured the absolute ASF between the Pohang transmit station and KRISS by the measurement technique of absolute time delay using a cesium atomic clock. The average ASF between two points is about $3.5{\mu}s$.

Relationship between Environmental Conditions and the Growth of Ginseng (Panax ginseng C. A. Meyer) Plant in Field III. Field Photosynthesis under Different Light Intensity (인삼포의 환경조건과 인삼(Panax ginseng C. A. Meyer) 생육과의 관계)

  • 이성식;천성기;목성균
    • KOREAN JOURNAL OF CROP SCIENCE
    • /
    • v.32 no.3
    • /
    • pp.256-267
    • /
    • 1987
  • Changes of light intensity under and above shading materials were measured at different relative light intensity(R.L.I. 5% of common straw shading, 15% of polyester shading and 20% of polyester shading at 12 o'clock on clear day) and lines(lst, 3rd and 5th lines) on clear and cloudy days in 5-year -old ginseng plant populations. Rates of photosynthesis and respiration, microclimate and root yield were also measured in field. Air temperature of R.L.I. 5% were lower 2$^{\circ}C$ compared with R.L.I. 15% and lower 3$^{\circ}C$ compared with R. L. I. 20% from 12 to 14 o'clock on clear day, but there were not difference among R. L. I. on cloudy day. Relative humidity of R. L. I. 5% were higher 5% compared compared with R.L.I. 20% from 10 to 14 o'clock on clear day, R. L. I. on cloudy day. Light intensity were below 5,000 lux at R.L.I. 5%, about 15,000 lux at R.L.I. 15% and about 20,000 lux at R.L.I. 20% from 10 to 15 o'clock on clear day. But light intensity were below 3, 000 lux at R. L. I. 5% about 10, 000 lux at R. L. I. 15% and about 15, 000 lux at R. L. I. 20% from 10 to 15 o'clock on cloudy. Photosynthetic rate of R.L.I. 15% and R.L.I. 20% were higher compared with R.L.I. 5% on clear and cloudy days. Tatal photosynthesis in a day were increased by R.L.I. 5%, 20%, 15% in turn on clear and cloudy days. R. L. I. 15% and 20% were not notable difference of photosynthetic rates among lines but R. L. I. with R. L. I. 15%, and higher 8% but there were not different among 5% was notable difference of one. Root fresh weight were increased by R.L.I. 5%, 20% and 15% in turn and R.L.I. 15% and 20% were not notable difference of root yield among lines but R. L. I. 5% was notable difference of one.

  • PDF

Assessment of Capsular Insertion Type and of Capsular Elongation in Patients with Anterior Shoulder Instability and It's Correlation with Surgical Outcome: A Quantitative Assessment with Computed Tomography Arthrography

  • Kim, Do Hoon;Kim, Do Yeon;Choi, Hye Yeon;Park, Ji Soon;Lee, Ye Hyun;Oh, Joo Han
    • Clinics in Shoulder and Elbow
    • /
    • v.19 no.3
    • /
    • pp.155-162
    • /
    • 2016
  • Background: The study aimed to determine the type of capsular insertion and the extent of capsular elongation in anterior shoulder instability by quantitatively evaluating their computed tomography arthrographic (CTA) findings, and to investigate the correlation of these parameters with surgical outcomes. Methods: We retrospectively reviewed 71 patients who underwent CTA and arthroscopic capsulolabral reconstruction for anterior shoulder instability between April 2004 and August 2008. The control group comprised 72 patients diagnosed as isolated type II superior labrum anterior to posterior (SLAP) lesion during the period. Among the 143 patients, 71 were examined with follow-up CTA at an average 13.8 months after surgery. It was measured the capsular length and cross-sectional area at two distinct capsular regions: the 4 and 5 o'clock position of the capsule. Results: With regards to the incidence of the type of anterior capsular insertion, type I was more common in the control group, whereas type III more common than in the instability group. Anterior capsular length and cross-sectional area were significantly greater in the instability group than in the control group. Among patients of the instability group, the number of dislocations and the presence of anterior labroligamentous periosteal sleeve avulsion lesion were significantly associated with anterior capsular redundancy. Postoperatively, recurrence was found in 3 patients (4.2%) and their postoperative capsular length and cross-sectional area were greater than those of patients without recurrence. Conclusions: Capsular insertion type and capsular redundancy derived through CTA may serve as important parameters for the management of anterior shoulder instability.

A Low-power, Low-noise DLL-based Frequency Multiplier for Reference Clock Generator (기준 클럭 발생을 위한 저 젼력, 저 잡음 DLL기반 주파수 체배기)

  • Kim, Hyung Pil;Hwang, In Chul
    • Journal of Korea Society of Industrial Information Systems
    • /
    • v.18 no.5
    • /
    • pp.9-14
    • /
    • 2013
  • This paper is designed frequency multiplier with low phase noise using DLL technique. The VCDL is designed using a differential structure to reduce common-mode noise. The proposed frequency multiplier is fabricated in a 65nm, 1.2V TSMC CMOS process, and the operating frequency range from 10MHz to 24MHz was measured. The SSB phase noise is measured to be -125dBc/Hz at 1MHz from 38.4MHz carrier. A total area of $0.032mm^2$were consumed in the chip, including the output buffer. Total current is 1.8mA at 1.2V supply voltage.

PER3, a novel target of miR-103, plays a suppressive role in colorectal cancer in vitro

  • Hong, Zhang;Feng, Zhang;Sai, Zhang;Tao, Su
    • BMB Reports
    • /
    • v.47 no.9
    • /
    • pp.500-505
    • /
    • 2014
  • Colorectal cancer has become the third most common cancer and leads to high mortality worldwide. Although colorectal cancer has been studied widely, the underlying molecular mechanism remains unclear. PER3 is related to tumor differentiation and the progression of colorectal cancer. High expression of miR-103 is associated with poor prognosis in patients with colorectal cancer. However, the relationship between miR-103 and PER3 in CRC cells remains unclear. In this study, we found that PER3 was downregulated in CRC tissues and CRC cell lines, whereas miR-103 was upregulated in CRC cell lines. We also found that PER3 promoted CRC cells apoptosis. These results indicate that PER3 plays a suppressive role in CRC cells. Moreover, we found that PER3 was targeted, at least partially, by miR-103. Taken together, we provide evidence to characterize the role of PER3 in CRC, which may be a new therapeutic target for CRC.