• 한국응용과학기술학회지
• /
• 제38권5호
• /
• pp.1219-1228
• /
• 2021

친환경적 바이오 계면활성제의 하나인 람노리피드(rhamnolipid)의 제조는 Pseudomonas aeruginos 계열의 박테리아가 가장 많이 사용되며, 바이오 공정을 통해 생산된다. 람노리피드의 화학구조는 rhamnose당과 𝛽-hydroxylated fatty acid의 결합으로 이루어져 있으며, 바이오 공정을 통해 동질체 혼합물 형태로 생산된다. 발효(fermentation)공정 중 거품 제어가 수율을 결정하는 가장 중요한 요인으로 알려져 있다. 본 논문에서는, 박테리아 내부에서 일어나는 람노리피드 합성 메카니즘을 소개하였고, 발효공정에서 문제점으로 인식되었던 거품 제어 방법에 대한 최근 시도들을 살펴보았다. 10년 전과 비교하여, 람노리피드 양산화 가능성은 빠르게 높아지고 있다. 특히, 람노리피드와 같은 바이오 계면활성제는 의약품과 같은 고부가가치 제품으로 응용된다면, 시장의 요구가 더 커질 것으로 기대한다.

• 한국버섯학회지
• /
• 제17권2호
• /
• pp.41-46
• /
• 2019

This study was carried out to investigate optimum wind velocity for growth of Pleurotus ostreatus. In the chamber experiments, the divergence of pileus was $63^{\circ}$ in 0.3m/s, and it showed the tendency that the more the air velocity was increased, the more the divergence became small. And the ratio of commercial yields was 96% in the air velocity of 0.3m/s. In the cultivation room experiments, the divergence of pileus was $64^{\circ}$ in 0.3m/s, and it was the tendency that the more the air velocity was fast, the more the divergence became larger. And the commercial yields was similar to the trend of the chamber experiment as 94.8% in 0.3m/s, and the quality characteristics of the fruit-body showed the uniform quality in comparison with other treatment because the standard deviation of the size of the pileus, etc. was the lowest in 0.3m/s like the chamber experiment.

• 한국수소및신에너지학회논문집
• /
• 제32권3호
• /
• pp.149-155
• /
• 2021

Most of the reformer experiments have been conducted only in high-temperature operation conditions above 700℃. However, to design high efficiency solid oxide fuel cell, it is necessary to test actual reaction performance in mid-temperature (550℃) operation areas. In order to study the operation characteristics and performance of commercial reforming catalysts, a reforming performance experiment was conducted on mid-temperature. The catalysts used in this study are Ni-based FCR-4 and Ru-based RuA, RuAL. Experiments were conducted with a Steam-to-carbon ratio of 2.0 to 3.0 under gas hourly space velocity (GHSV) 2,000 to 5,000 hr-1. As a result, RuA and RuAL catalysts showed similar gas composition to the equilibrium regardless of the reforming temperature. However, the FCR-4 catalyst showed a lower hydrogen yield compared to the equilibrium under high GHSV conditions.

• 청정기술
• /
• 제19권1호
• /
• pp.59-64
• /
• 2013

고분자전해질 연료전지에서 사용되는 전도성 카본에 백금이 담지된 전극촉매를 콜로이드법을 이용하여 합성하였다. 콜로이드법 합성을 위한 백금 전구체로는 PSA (platinum sulfite acid)를 사용하였으며, 고가의 전구체를 대체하기 위해 CPA (chloroplatinic acid)를 사용하여 합성하였다. PSA를 전구체로 하여 제조한 전극촉매는 10~40 wt% 담지량에서 3.5 nm 이하의 백금 입자크기와 90% 이상의 백금 담지수율을 보였다. CPA를 전구체로 사용한 경우에는 10~40 wt% 담지량에서 4.4 nm 이하의 백금 입자 크기를 보였으며 담지수율은 80% 이상이었다. 제조한 20 wt% Pt/VXC72 전극촉매로 MEA (membrane electrode assembly)를 제조하여 I-V 곡선을 측정하였으며, 제조한 전극촉매를 이용한 막전극접합체는 상용전극촉매를 사용한 경우와 동등한 성능을 보였다.

• International Journal of Industrial Entomology and Biomaterials
• /
• 제19권2호
• /
• pp.265-268
• /
• 2009

Wild silkmoths can be utilised sustainably in the production of silk as an income for resource-poor rural communities. However, attack by parasitoids and predators affect the quality of cocoons and quantity of raw silk produced. A laboratory experiment was undertaken to quantify the effect of parasitoids' (dipteran and hymenopteran) and predators' (ants) exit and ingress holes, respectively, on silk production. The mean number of shells required to produce fifty grams of raw silk was highest with cocoons parasitised by a dipteran and lowest with unattacked cocoons (but with moths already emerged). Degumming loss was highest in parasitised and lowest in unttacked cocoons, but both were not different from cocoons predated by ants. Shell weight was highest in unattacked cocoons, followed by hymenopteran-parasitised and predated cocoons, with the dipteran parasitized ones being the least. Single cocoon weight was greater in hymenopteran-parasitised and predated cocoons than the dipteran-parasitised and unattacked cocoons. Shell ratio or raw silk, floss and yarn weights were higher in unattacked than parasitised and predated cocoons. The total loss in raw silk attributable to attack by parasitoids and predators ranged between 17.4~31.2%. The results offer baseline information for assessment of economic losses in wild silk farming due to parasitoids and predators in the field.

• 펄프종이기술
• /
• 제48권3호
• /
• pp.44-50
• /
• 2016

As a raw material for pulp and paper industry, Moso bamboo, Timber bamboo and Henon bamboo pulps were prepared by soda or soda-anthraquinone(Soda-AQ) pulping process. Soda-AQ pulp yields was higher in Henon bamboo (43.2%) than in Moso bamboo or Timber bamboo (32.7-39.2%), but quite lower than hardwood species. In Kappa number comparison, Henon bamboo pulp showed lower (16.6) with 50 min cooking to $170^{\circ}C$ than that of Moso bamboo (22.8) and Timber bamboo (18.9) with 90 min cooking to $170^{\circ}C$. Fiber length of Timber bamboo soda pulp had higher (1.46 mm) than that of Moso bamboo or Henon bamboo (1.18-1.36 mm). All three bamboo pulps showed longer average fiber length than commercial hardwood pulp. With higher pulp yield and lower Kappa number, Henon bamboo is better raw material for pulp than Moso bamboo and Timber bamboo.

• Ocean and Polar Research
• /
• 제28권2호
• /
• pp.187-199
• /
• 2006

The Kuroko-type seafloor massive sulfide deposits found in the western Pacific have been considered to have potentials for economic recovery of Au, Ag, Cu, Zn, and Pb. In this study, a preliminary model was developed for the technical and economic evaluation of them. The FRSC site on Lau Basin in the Tonga EEZ was selected as a target. In this study, no construction In for the metallurgical processing subsystem was accounted for. Instead, it was assumed to sell the Cu, Zn, and Pb concentrates to the existing sulfide customer smelter. The low total investment costs for the development make the venture very attractive. However, the result of the economic feasibility evaluation is still less attractive with the mean metal yield of the Kuroko on land. It is considered that commercial mining may be plausible if the richer metal yields are applied to the development. Quantitative information for metal yield is necessary for a more accurate evaluation. However, the important resource potential information regarding the amount of ore body, the inside structure, and the metal yields have not yet been clarified sufficiently. h addition, the flotation of ore body using seawater has not been tested yet. It is necessary to solve these problems through the experimental R&D and a survey.

• 한국기계가공학회지
• /
• 제17권3호
• /
• pp.109-119
• /
• 2018

The purpose of this study is to evaluate the structural safety of the front-end loader for the 90 kW class of agricultural tractors in impact test conditions. Deformation and stress on the loader under the impact test conditions are analyzed using the commercial finite element analysis software ANSYS. In previous research dealing with the initial design of the loader, the maximum stress occurred in the mount and exceeded the yield strength of the material. In this paper, an improved design of the mount of the loader was proposed to reduce the stress concentration in the initial design. The safety of the improved design was verified by performing rigid-body dynamics analysis, transient structural analysis, and static structural analysis under three impact test conditions: a drop and catch test, a corner pull test, a corner push test. It was found that the local stress concentration in the mount that appeared in the initial design was greatly reduced in the improved design, and that the maximum stresses occurred in the three impact test conditions are smaller than the yield strength. It is expected that the design improvement of the mount proposed in this study and the method of analysis may be effectively used to enhance structural safety in the development of new model front loaders in the future.

• Journal of Microbiology and Biotechnology
• /
• 제15권6호
• /
• pp.1183-1188
• /
• 2005

Several lipases of commercial grade were screened to catalyze the methanolysis of castor oil, and an immobilized Candida antarctica (Novozym 435) had the highest activity among the lipases tested. To enhance the yield of methyl ricinoleate, several reaction parameters were optimized. The optimum temperature was $50^{\circ}C$, and the original water content of lipase was sufficient to maintain the activity of lipase, and additional water supplied inhibited the methanolysis of castor oil. Because the lipase was deactivated by methanol, the reaction was tested by three-step addition of 1 molar equivalent of methanol to the oil. However, the oil was not completely converted to its methyl esters. The final reaction mixture using 3 molar equivalents of methanol to the oil consisted of $70\%$ methyl ricinoleate, $18\%$ monoricinoleate, $11\%$ diricinoleate, and trace triricinoleate at the equilibrium state. The yield of methyl ricinoleate was $97\%$ at 6 molar ratio of methanol to the oil with 300g of castor oil and 6g of immobilized Candida antarctica at $50^{\circ}C$ within 24 h.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2003년도 학술발표논문집
• /
• pp.347-350
• /
• 2003

Pleurotus eryngii is one of the most promising mushrooms produced on the domestic farms. The quality as well as quantity of Eryngii is sensitively affected by micro climate factors such as temperature, relative humidity, $CO_2$ concentration, and light intensity. At the commercial mushroom cultivation houses, this study was carried out to find out reasonable range of each environmental factor and yield together with economic and safe structures influencing on the optimal productivity of Eryngii. This experiment was conducted from Jan. 26, 2003 to Aug. 2, 2003. Ambient temperature during the experiment period was not predominantly different from that of a normal year. The capacity of the hot water boiler and the piping systems were not enough. Maximum temperature difference between the upper and lower growth stage during a heating time zone was about $6^{\circ}C$. The max. and min. relative humidity were ranged approximately $42{\sim}100%$. The $CO_2$ concentration and the illuminance were lowly maintained during growing period. The average yield per bottle was about $54{\sim}102g$.