• Asian-Australasian Journal of Animal Sciences
• /
• v.12 no.8
• /
• pp.1292-1297
• /
• 1999

A preference test on feed and nutrient intakes were conducted on four male ($1.25{\pm}0.08kg$) and four female ($1.21{\pm}0.15kg$) lesser mouse deer (Tragulus javanicus) in captivity. Each animal was kept in individual cages placed in a well-ventilated animal house. The experiment was conducted in two weeks, where the first week was for adaptation to the feeds and the second week for measurements of nutrient intake, nutrient digestibility and nitrogen balance. The feeds offered were kangkong (Ipomoea aquatica), long bean (Vigna sinensis) and french bean (Phaseolus vulgaris) as roughages and proteinaceous feeds; sweet potato (Ipomoea batatas) and carrot (Daucus carota) as carbohydrate-rich feeds; and commercial rabbit pellet (0.3 cm diameter and 0.5 cm long) as a complete feed. The dry matter (DM) content of each feed in the order mentioned above was 7.1, 6.1, 3.9, 18.5, 6.2 and 87.6%, respectively. Long bean had the highest protein (CP) content (29.7%), while sweet potato had the lowest (6.2%). The CP contents of other feeds were within the range of 14.2 - 25.1%. Among the feeds, carrot had the lowest energy content (3.83 kcal/g) and long bean the highest (4.67 kcal/g). When fresh weight of the feed was considered, the male mouse deer consumed sweet potato the most ($86.3{\pm}12.90g/d$), but the female had a high preference for carrot ($79.2{\pm}9.76g/d$). The other feeds were consumed in lesser amounts. However, in terms of DM of the feed, the amount of commercial pellet consumed was the highest for both male ($45.0{\pm}5.10%$) and female ($44.7{\pm}7.38%$) mouse deer, followed by sweet potato ($33.1{\pm}4.43%$ and $22.4{\pm}7.73%$ for male and female, respectively). Significant (p<0.05) differences in DM, organic matter (OM) and gross energy (GE) intakes were observed between male and female mouse deer. The male consumed higher amount of DM, OM and GE than the female. The total DM intake was $40.7{\pm}2.24g/d/kg$ $W^{0.75}$ for male and $35.9{\pm}1.72g/d/kg$ $W^{0.75}$ for female mouse deer. Percentage digestibilities of DM, OM, CP and GE were within 72.7~80.8% and were not significantly different between male and female mouse deer. However, male mouse deer had significantly (p<0.05) higher digestible DM, OM and GE intakes than the female. Both male and female mouse deer were in positive nitrogen balance (0.6 g N/d/kg $W^{0.75}$). The male mouse deer gained $7.6{\pm}3.45g/d$, while the female gained $4.3{\pm}2.40g/d$.

• Journal of the Microelectronics and Packaging Society
• /
• v.27 no.1
• /
• pp.1-7
• /
• 2020

The backside metallization process is typically used to attach a chip to a lead frame for semiconductor packaging because it has excellent bond-line and good electrical and thermal conduction. In particular, the backside metal with the Ag/Sn/Ag sandwich structure has a low-temperature bonding process and high remelting temperature because the interfacial structure composed of intermetallic compounds with higher melting temperatures than pure metal layers after die attach process. Here, we introduce a die attach process with the Ag/Sn/Ag sandwich structure to apply commercial semiconductor packages. After the die attachment, we investigated the evolution of the interfacial structures and evaluated the shear strength of the Ag/Sn/Ag sandwich structure and compared to those of a commercial backside metal (Au-12Ge).

• Wind and Structures
• /
• v.28 no.3
• /
• pp.171-180
• /
• 2019

This paper presents a restart iterative approach for time-domain flutter analysis of long-span bridges using the commercial FE package ANSYS. This approach utilizes the recursive formats of impulse-response-function expressions for bridge's aeroelastic forces. Nonlinear dynamic equilibrium equations are iteratively solved by using the restart technique in ANSYS, which enable the equilibrium state of system to get back to last moment absolutely during iterations. The condition for the onset of flutter instability becomes that, at a certain wind velocity, the amplitude of vibration is invariant with time. A long-span suspension bridge was taken as a numerical example to verify the applicability and accuracy of the proposed method by comparing calculated results with wind tunnel tests. The proposed method enables the bridge designers and engineering practitioners to carry out time-domain flutter analysis of bridges in commercial FE package ANSYS.

• Korean Journal of Materials Research
• /
• v.33 no.10
• /
• pp.414-421
• /
• 2023

Infrared radiation (IR) refers to the region of the electromagnetic radiation spectrum where wavelengths range from about 700 nm to 1 mm. Any object with a temperature above absolute zero (0 K) radiates in the infrared region, and a material that transmits radiant energy in the range of 0.74 to 1.4 um is referred to as a near-infrared optical material. Germanate-based glass is attracting attention as a glass material for infrared optical lenses because of its simple manufacturing process. With the recent development of the glass molding press (GMP) process, thermal imaging cameras using oxide-based infrared lenses can be easily mass-produced, expanding their uses. To improve the mechanical and optical properties of commercial materials consisting of ternary systems, germanate-based heavy metal oxide glasses were prepared using a melt-cooling method. The fabricated samples were evaluated for thermal, structural, and optical properties using DSC, XRD, and XRF, respectively. To derive a composition with high glass stability for lens applications, ZnO and Sb₂O₃ were substituted at 0, 1, 2, 3, and 4 mol%. The glass with 1 mol% added Sb₂O₃ was confirmed to have the optimal conditions, with an optical transmittance of 80 % or more, a glass transition temperature of 660 ℃, a refractive index of 1.810, and a Vickers hardness of 558. The possibility of its application as an alternative infrared lens material to existing commercial materials capable of GMP processing was confirmed.

• Korean Journal of Environmental Agriculture
• /
• v.18 no.3
• /
• pp.280-286
• /
• 1999

This studies were conducted to evaluate efficiency of microbial inoculator for active composting of food wastes. The Microbial inoculators used in this studies were purchased from different comparise to evaluate their effectiveness for composting of food waste in Korea. The number of bacteria growing at $30^{\circ}C$ in commercial inoculator collected were below $91.0{\times}10^8\;CFU/g$ which were counted from well cured compost made by animal manure. The number of bacteria in commercial microbial inoculator, such as FL, VP, B9, CM and GE were higher than that of composted at $50^{\circ}C$ or $60^{\circ}C$ of incubation temperature. Fungi were counted in GR, VP and B9 as over $10^3CFU/g$ at $30^{\circ}C$ of incubation temperature, while fungi of all the commercial inoculator collected could not grown at $50^{\circ}C$ and $60^{\circ}C$. Actinomycetes in most of the these had higher number($10^5CFU/g$) than that of compost : however, it was not detected at $60^{\circ}C$ incubation temperature from all the samples collected. The amount of carbon dioxid production was order to VP>HU>B9>GE>CM>Control>Compost in the lab scale composting test with or without inoculation of commercial inoculators, however, but the difference in carbon dioxide production was similar among each treatments. The effect of inoculation on composting parmeter such as pH changes, temperature increasing and change of chemicals properties were a little among each treatments, with or without inoculation of commercial inoculator in active composting of food waste. Using commercial inoculator did not show any statistical difference in food waste composting process under various condition such as pH changes, temperature changes, etc.

• Current Optics and Photonics
• /
• v.3 no.6
• /
• pp.510-515
• /
• 2019

In this paper, we introduce a 1.3-㎛ 25-GHz waveguide-integrated vertical PIN type Ge-on-Si photodetector fabricated using a multi-project wafers service based on fringing field analysis in the depletion region. In general, 1.3-㎛ photodetectors fabricated using a commercial foundry service can achieve limited bandwidths because a significant amount of photo-generated carriers are located within a few microns from the input along the device length, and they are influenced by the fringing field, leading to a longer transit time. To estimate the response time, we calculate the fringing field in that region and the transit time using the drift velocity caused by the field. Finally, we compare the estimated value with the measured one. The photodetector fabricated has a bandwidth of 20.75 GHz at -1 V with an estimation error of <3 GHz and dark current and responsivity of 110 nA and 0.704 A/W, respectively.

• Journal of Radiation Protection and Research
• /
• v.34 no.2
• /
• pp.83-86
• /
• 2009

The single crystal scintillator of bismuth germinate ($Bi_4Ge_3O_{12}$:BGO) was successfully grown by the conventional Czochraski technique. The characteristics of the grown BGO were evaluated and presented on the excitation, emission responses and energy spectra of the $\gamma$-rays from $^{241}Am$, $^{133}Ba$, $^{57}Co$, $^{22}Na$, $^{137}Cs$ and $^{54}Mn$ radio-isotopes. The energy resolution of grown BGO, $\Delta$E/E, was estimated to be 12.1% at 662 keV of $\gamma$-ray for $^{137}Cs$ nuclide. Compared to the commercial BGO crystal, we confirmed that the grown BGO has a good performance and is comparable to reference one.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.3
• /
• pp.283-291
• /
• 2015

In this paper, a negative impedance converter, the key element of non-Foster matching to enhance the bandwidth of matching high Q-factor passive element, is presented. Proposed negative impedance converter is implemented by the topology of Linvill's transistor negative impedance converter circuit. It is hard to forecast the operation of negative impedance circuit, because it is composed of gain element and positive feedback. Therefore the negative impedance circuit is implemented by hybrid type beforehand to check out the feasibility and it is designed by integrated circuit. The integrated circuit is fabricated by commercial $0.18{\mu}m$ SiGe BiCMOS process, and non-Foster matching is observed at 700~960 MHz band by cancelling the target reactance.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.8
• /
• pp.2023-2028
• /
• 2014

In this study, we studied the effect of $Co^{60}$ gamma-radiation on the FBGs written in photo-sensitive and commercial Ge-doped single-mode optical fibers. The FBGs were exposed to gamma-radiation up to a dose of 17.8 kGy at the dose rate of 300 Gy/min. According to the experimental data and analysis results, the lowest Bragg wavelength shift (18 pm) was obtained by a grating written in photosensitive fiber without $H_2$-loading. Also, we confirmed that the H2 loading process has considerably more influence on the Bragg wavelength shift change under gamma radiation than $GeO_2$ contents in the fiber core.

• Korean Journal of Agricultural Science
• /
• v.46 no.3
• /
• pp.569-577
• /
• 2019

The current experiment was conducted to compare nutrient utilization in the aged laying hens with different eggshell strengths or different intensities of brown eggshell color. Two metabolic trials with 96-week-old Hy-Line Brown laying hens were conducted. Twelve hens with a strong eggshell strength (SES) and 12 hens with a weak eggshell strength (WES) were selected and used in the first experiment, whereas 12 hens with dark brown eggshells (DBE) and 12 hens with light brown eggshells (LBE) were selected and used in the second experiment. All hens were fed a common commercial layer diet. Diets included chromic oxide as an indigestible marker to determine the apparent total tract retention (ATTR) of the gross energy (GE), dry matter, acid-hydrolyzed ether extract, nitrogen, neutral detergent fiber, acid detergent fiber, ash, and minerals. The results indicate that the ATTR of Ca in the aged laying hens with SES (59.7%) was greater (p < 0.05) than in the aged laying hens with WES (48.6%). However, the ATTR of the GE and other nutrients was not different between the hens with SES or WES. There were no differences in the ATTR of GE and nutrients between the hens with DBE or LBE. In conclusion, aged laying hens with SES have a greater ability to utilize dietary Ca than those with WES, indicating that the extent of dietary Ca utilization determines the eggshell strength of aged laying hens. However, nutrient utilization in diets may have little impact on eggshell brown coloration in aged laying hens.