• Journal of environmental and Sanitary engineering
• /
• v.22 no.1 s.63
• /
• pp.1-16
• /
• 2007

The incineration process has commonly used for wastes amount reduction and thermal treatments of pollutants as the technologies accumulated. However, the process is getting negative public images owing to matter of hazardous pollutants emission. Specially dioxins became a main issue and is mostly emitted from municipal solid wastes incineration. In this reason, pyrolysis/gasfication/melting process is presented as a alternative of incineration process. The pyrolysis/gasfication/melting process, a novel technology, is middle of verification of commercial plant and development of technologies in Korea. But the survey about the pollutant emission from the process, and background data in these facilities is necessary. So in this survey, it Is investigated that the behavior of dioxins in three pyrolysis/gasfication/melting plant (S, T, P) of pilot scale. In case of S plant, concentration of dioxins shows high at latter part of cogenerated boiler and stack which are operate on low temperature conditions than a latter parts of pyrolysis and melting furnace which are operate on high temperature condition. Concentration of gas phage dioxins had increased after combusted gas passed cogenerated boiler and this is attributed to react of precursor materials such as chlorobenzene and chlorophenol. Concentration of dioxins in T plant showed lower levels at latter part of cooling equipment which are operate with water spray type on low temperature conditions than a latter parts of gasfied melting furnace which are operate on high temperature condition. Removal efficiency of dioxins at gas treatment equipment was 78.8 %. Concentration of dioxins in P plant was low at latter part of SDA/BF which is operate at low temperature conditions than a latter parts of pyrolysis gasfied chamber which are operate at high temperature condition. Removal efficiency of dioxins of SDA/BF was 85.9 % and therefore, it showed high efficiency at those of stoker type incineration facility. However, concentration of dioxins which emitted at high temperature condition were low in three facilities and satisfied present standard emission level of dioxins. To consider the distribution ratio of dioxins, Particulate phase dioxins at S and P plants showed similar ratio with which shows in current stoker type for middle scale domestic waste incineration facility. It is necessary to continuos monitoring the ratio of distribution of dioxins in T plant in because ratio of gas phage dioxins showed high.

• Journal of Korea Water Resources Association
• /
• v.47 no.8
• /
• pp.717-728
• /
• 2014

In this study, we developed a depth-damage function based on flood damage survey with focusing on building damage in urban area. We designed items for the questionnaire survey to develop a depth-damage function which estimates the amount of damage based on inundation depth targeting Dongducheon, Korea, which has experienced severe inundation damage due to significant flooding in July 2011. Based on the survey of the area, we developed a depth-damage function and used this to estimate the real amount of damage on buildings in the inundation area. To assess the damage on buildings, we categorized buildings into two groups; namely residential buildings and commercial buildings. Also, in order to calculate the real amount of damage caused by flooding, properties and detailed damaged items were sub-divided into two groups for the survey; facilities loss (wall paper, floor paper, painting, electrical facilities, and boilers) and furnishing loss (furniture, electronic products, and daily necessities. We expect this study on the process for developing depth-damage function and on the investigation research for flooded area to help in the efficient implementation of all kinds of disaster management policies and the attainment of a society safe from disaster.

• Journal of the Korea Society of Computer and Information
• /
• v.3 no.3
• /
• pp.139-150
• /
• 1998

Due to development of science and telecommunication with wide-spread computer supply, it could be done through computer automatically instead of manpower-work for paper transportation & paper approval. It is developed to so-called Factory Automation. Further, it is developed to Office Automation. Trading companies & concerned trade authorities are interested in Trade Automation that such technique is applied to trade work. Generally, Trade Automation means to realize paperless trade by exchanging electronic papers through inter-computers after concerned trade operators transformed various papers to electronic papers that computer could read. In case Trade Automation fix in the trade business, it is expected one of innovations among traditional paper work of trade business, namely without going import-export authorities, Customs office, Banks. Shipping companies, Marine insurance companies on hand-carrying papers, it could be fast, simple, correct to finish every trade procedures such as commercial business, foreign currency, customs clearance, transportations, insurance. terms of payment, etc., with Electronic Data Interchange through computer facilities. Especially, telecommunication for trade form could be helpful to proceed trade paper with one-run-method Further we can anticipate 6 effects for Trade Automation as belows : First, as explained just above articles, with completion for Trade Automation, every trade procedures can be done by computer. so, time to work can be diminished. namely. logistics cost including accessory costs for trade procedures can be saved much. Second, viewing to private enterprise, effect of Office Automation can be maximized and rapid, correct exchange for various trade informations could raise efficiency of enterprise management establishing rational production, storage, transportation and could raise competition improving standard for consumers's service. Third, establishing Trade Automation systems makes it easier piling-up of harbor cargo by pre-transmission of electronic paper & trade informations make it possible to finish customs clearance in advance and can be dispatched upon cargo arrival. Fourth, most of concerned trade authorities such as import-export approval office. financial authorities, transport & insurance companies concentrated in Metropolitan area(Seoul, In -Cheon, Kyung-Ki). Therefore, in case Trade Automation could be realized. it is possible to proceed trade business instantly in every country area by computer facilities. Also. it contribute well-balanced development for suburb. region area by suburb dispersion of trading companies. Fifth, on the way to Trade Automation establishment & its enlargement process. producing enormous demand for over-all telecommunication such as hardware. software. network makes opportunity to progress telecommunication industry & concerned industries. Finally. Trade Automation accelerate change of employment structure leading unnecessary labors on the industries of office & logistics to manufacturing area.

• Journal of Korean Society of Forest Science
• /
• v.96 no.1
• /
• pp.96-106
• /
• 2007

The purpose of this paper was to identify the effects of elimination of entrance fee (EEF) affecting visitor's satisfaction (VS) and management sectors such as natural resources (NRs), park facilities, transportation, visitor service, visitor atmosphere (VA) in national parks (NPs). This research had obtained data through a questionnaire, which surveyed 336 visitors at Gayasan NP in 2006. The data were analyzed the data using descriptive statistical methods, Pearson's correlation analysis, and multiple linear regression method. It was found that 1) About EEF, 72.6% of respondents agreed. 2) As entrance fee was abolished, respondents predicted that degree of VA such as crowding, waste throwing, disorder etc. grew worse most. On the other hands, respondents predicted number and quality of commercial lodging facilities, festival, and local products would improved. 3) Respondents predicted that degree of VS would worse. 4) in multiple regression analysis, the relative contribution of the VA on VS have been determined to have respectively 1.84 times more important than that of the change degree of NRs. The results suggested that the management of VA in NP was the most important factor to prevent decline of VS. This paper would be helpful to establish national park management policy after EEF.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.15 no.3
• /
• pp.88-98
• /
• 2011

Masonry structure is a style of building which has been widely applied as residential facilities of low and middle stories, commercial and public facilities etc. But it is possible to destroy by loss of adhesive strength or sliding when lateral forces, such as earthquake, occurs. This study proposes a seismic retrofit method for masonry structure and its seismic performance is demonstrated by shaking table test. Two specimens per each shaking direction were made, having out-of-plane(weak axis) and in-plane(strong axis) direction. External load of 1 ton was also applied for each specimen during the test, to model the behavior of reinforced masonry wall. As a result of shaking table tests, it is shown that the specimen applying the proposed seismic retrofit method showed acceptable behaviors in both of Korea building design criteria(0.14g) and USA seismic criteria suggested by IBC(0.4g). However, it was observed that stiffness of the specimen toward out-of-plane was rapidly decreasing when seismic excitations over 0.14g were loaded. In comparison of relative displacements, maximum relative displacement of specimens which were accelerated toward out-of-plane with 0.4g at once was 29~31% of maximum relative displacement when specimens were gradually accelerated from 0.08g to 0.4g, while the maximum relative displacement of specimens accelerated toward in-plane has similar value in both cases. Therefore, it is concluded that the wall accelerated toward out-of-plane is more affected by hair crack or possible fatigues caused by seismic excitation.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.38 no.3
• /
• pp.115-125
• /
• 2010

A theme park is not just a recreational space for leisure activities, but also a place of storytelling as collected around abstract boundaries called themes. These stories are 'a space that tells the meaning' that the visitor is looking for and the Robot Land space offers robots, humans, and nature. This study is a description of the design strategy and content of the work which was elected as a subject of the subsequent rank negotiation of the Masan Robot Land design contest for the selection of a private contractor. The focus of the plan is, first, the organizational power of each space and the delivery power of a theme for the history of revisits, which might be considered depending on whether or not the theme park has been successful in the visitor's mind. Second, it is to actively use the potential of Masan, which is not only the key hub of the mechanical industry but also has beautiful coastal resources. First, they created a space that can flexibly react depending on the user's desire and the change of form, minimizing environmental damage by using a linear metabolism that can provide an amalgam of the elemental characteristics of robots, humans, and nature as motifs. They introduced a planting plan for the admissions square, an existing forest, slope, vacation spot, the inside of a complex, and Eco Island, etc. by utilizing symbolic meaning and adjusting to the spatial characteristics of each space. In addition, they sought a detailed space by setting up zones tailored to the use and character of the subject area, having exhibitions and education about robots, vacation facilities for lodgers, various recreational and commercial facilities, and space for utopian gardens as themes. They planned Masan Robot Land to be a true cultural space that creates mental richness on the basis of not only the economical effects but also local emotion.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.30 no.1
• /
• pp.10-18
• /
• 2018

Recently, a port city has been gradually expanding near coastal area, and many facilities for tourism and waterfront have been constructed near the shore. When storm surge developed by typhoon have occurred, coastal facilities have a lot of damage and failure with loss of life caused directly by the waves. Various barriers have been suggested to protect property and human life from disasters, they have not been widely applied though. Because they do not satisfy the recent trends that emphasize the surrounding scenery. In this study, a moveable barrier on revetment is proposed against wave overtopping. This moveable barrier has two function, sightseeing and protecting. In case of usual day, it is installed on the revetment and used observatory deck for sightseeing. When wave overtopping has occurred by storm surge, it protect coastal area through changing of flat deck to triangular barrier. The hydraulic and the structural performance of the newly proposed movable barrier was investigated through numerical analysis using commercial program. As a results, this structure has numerically good performance, and follow-up research is required through experimental tests though.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.5
• /
• pp.405-411
• /
• 2016

Given the importance of ensuring continued residency and maintenance of the 1st Planned New Town, which is the first of more than 20 such projects, this study aims to identify the factors determining the residents' living intention. The results show that age, gender, length of stay, and occupancy type are significant factors influencing their living intention. Among the environmental factors, the educational environment and shopping environment are crucial. This means that in order to achieve the "Ageing in Place" concept, it is necessary to improve the educational environment, provide a variety of commercial facilities and expand the living facilities. While it has no direct influence on the pros and cons of building remodeling, the results showed that when the living intention is used as a parameter, the transportation, educational, and shopping environment have an indirect influence on the pros and cons of building remodeling.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.12 no.3
• /
• pp.101-115
• /
• 2009

The prompt recovery of housing market in Korea became the national task, for which tools that can analyze the influence that changing situation of housing market and new policy may have on the housing market needs to be developed. Thus, this research intends to develop Multi-Agent Housing Market Model and simulation system in Jinju City as a study area. Analyzing the local housing market of Jinju City, then multi-agent model of housing market that consolidates 3 sub-models, house choice model, hedonic model of house price and location choice model is developed. Moreover in order to develop simulation system the model is programmed in the virtual space of which the size is $150{\times}100$ cell including physical shape of city such as road, urban facilities, land use, etc. With the system, simulations are performed to confirm the impact of urban development on the pattern of residential location. As a result, it is found that the residential location can not be easily induced when only road, commercial and convenient facilities are supplied. However, it is also found that since supplying green results in very many residences, arrangement of infrastructure and environmental factor should be considered at the same time for urban development. As conclusion, it is confirmed that the model and simulation system developed in this research smoothly works to be utilized for the analysis of diverse policy experiment and housing market.

• Journal of Cadastre & Land InformatiX
• /
• v.52 no.2
• /
• pp.17-34
• /
• 2022

With rapid advancements taking place in the Fourth Industrial Revolution, human-robot interactions have been garnering increasing attention. Robots are being actively adopted in building systems and facilities. In this study, we developed robot-friendly building certification indicators. Because these indicators were being developed for the first time, we focused only on commercial buildings. We conducted exploratory research using methodologies such as focus group interviews and the analytic hierarchy process. First, the concept of the robot-friendly building was defined through focus group interviews, and the requirements were categorized by the appropriateness of operating facilities and systems and the appropriateness of architectural and robot operating systems and networks. Next, the relative importance of the evaluation items (23 items in total) was calculated using the analytic hierarchy process. Their average score of the marks was 4.4, and the minimum and maximum were 2.0 and 11.3, respectively. This study is significant because we collected the basic data necessary to develop a one-of-its-kind evaluation system for certifying the robot-friendliness of buildings using scientific methods.