• Journal of the Korean housing association
• /
• v.17 no.6
• /
• pp.99-108
• /
• 2006

Ham-ra is a village that belongs to Ham-yuel Ri, Ik-san city and also known as the village where 4 millionaire modem age rich farmer households are residing in the center of the village. Originally, central point of the village was Gaeksa and Hyanggyo that is in Suodong, but early 1900s, rich farmers found new Places beside Suodong and built large-scale houses and around it, houses of tenant and commercial places were formed and became the new center of the village. Therefore, Ham-ra village shows well about the changes of the traditional village in the end of Chosun Dynasty aspect that of existent village space according to rich farmer's growth. Especially, the large scaled Korean traditional houses which were built newly in the year between 1917 to 1939 shows main road and Natural stream surrounding the village which are not found in any other village. 3 rich farmers (Lee Bae-won, Jo Hae-young, Kim An-gyun house) and Lee Jib-cheon's houses built a large scaled Sarang-chae and An-chae to compete and to show off there wealth. This residing imitated High-classe house yet accommodated social changes and through a voluntary experiment, is expressing modernity of Han-ok very well. Similarity and creativity in residing form appears well in buildings similar time and village. This research analyzed space composition change of the village and characteristic of Architecture who appear at modern process of typical farmer houses which make a strong resolution to Ham-ra hereupon.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39C no.9
• /
• pp.880-886
• /
• 2014

Many railway signalling functions have increasingly depended on computer software with recent development in computing technology, leading to evolution into more flexible and intelligent railway signalling system. Meanwhile, software programs are likely to have many errors and the cost incurred by such errors has increased. Especially, if fatal software error occurs during railway operation, it may result in loss of lives. So the software verification and validation have become more important. It is needed for software functional safety tool to support these, but most commercial tools depend on direct access to the system's memory, resulting in many difficulties in application. Owing to such difficulties and complexity, they are rarely used in railway signalling system software validation. In this study, a new testing tool for software functional testing through an external interface that can be easily used in functional testing of software was developed. Such testing tool allows development and analysis of test cases for black-box testing through analysis of actually used interface protocols, leading to increased user convenience.

• Korean Journal of Agricultural Science
• /
• v.38 no.4
• /
• pp.747-752
• /
• 2011

Wireless technology has enabled farmers monitor and control protected production environment more efficiently. Utilization of USN (Ubiquitous Sensor Network) devices also brought benefits due to reduced wiring and central data handling requirements. However, wireless communication loses signal under unfavorable conditions (e.g., blocked signal path, low signal intensity). In this paper, performance of commercial wireless communication devices were evaluated for application to protected crop production. Two different models of wireless communication devices were tested. Sensors used in the study were weather units installed outside and top of a greenhouse (wind velocity and direction, precipitation, temperature and humidity), inside ambient condition units (temperature, humidity, $CO_2$, and light intensity), and irrigation status units (irrigation flow and pressure, and soil water content). Performance of wireless communication was evaluated with and without crop. For a 2.4 GHz device, communication distance was decreased by about 10% when crops were present between the transmitting and receiving antennas installed on the ground, and the best performance was obtained when the antennas were installed 2 m above the crop canopy. When tested in a greenhouse, center of a greenhouse was chosen as the location of receiving antenna. The results would provide information useful for implementation of wireless environment monitoring system for protected crop production using USN devices.

• Ocean Systems Engineering
• /
• v.7 no.2
• /
• pp.143-155
• /
• 2017

For complex flexible structures such as nets, the determination of drag forces and its deformation is a challenging task. The accurate prediction of loads on cages is one of the key steps in designing fish farm facilities. The basic physics with a simple cage, can be addressed by the use of experimental studies. However, to design more complex cage system for various environmental conditions, a reliable numerical simulation tool is essential. In this work, the current load on a cage is calculated using a Morison-force model applied at instantaneous positions of equivalent-net modeling. Variations of solidity ratio ($S_n$) of the net and current speed are considered. An equivalent array of cylinders is built to represent the physical netting. Based on the systematic comparisons between the published experimental data for Raschel nets and the current numerical simulations, carried out using the commercial software OrcaFlex, a new formulation for $C_d$ values, used in the equivalent-net model, is presented. The similar approach can also be applied to other netting materials following the same procedure. In case of high solidity ratio and current speed, the hybrid model defines $C_d$ as a function of Re (Reynolds number) and $S_n$ to better represent the corresponding weak diffraction effects. Otherwise, the conventional $C_d$ values depending only on Re can be used with including shielding effects for downstream elements. This new methodology significantly improves the agreement between numerical and experimental data.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.4
• /
• pp.368-373
• /
• 2015

As a preliminary study for the development of the gas fueled marine engine, prediction of indicated performances was carried out for a spark-ignition engine using commercial software, GT-POWER. The optimized models through a previous study were applied for the simulation of the intake and exhaust systems in a SI engine. The Spark-Ignition Wiebe model was used to calculate the burn rate in the cylinders and the modified Woschni model was used to calculate the heat transfer to the walls. The predicted performances, such as air delivery, cylinder pressures and indicated mean effective pressures under a range of operating conditions showed good agreement with the experiments.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.9
• /
• pp.791-798
• /
• 2016

In this study, numerical simulations on the effects of bilge keel on roll motion were conducted. The numerical simulations were performed on a 110 m class PSV using the commercial viscous flow analysis software Star-CCM+. Before conducting the study on the 110 m class PSV, an additional simulation of DTMB 5512 was performed and compared with the experimental results to validate the feasibility of the numerical simulation. In the simulation on PSV, a nondimensional damping coefficient was calculated using a free roll decay simulation, and the response amplitude operator (RAO) for the roll motion was calculated with a nondimensional damping coefficient at two conditions (with/without bilge keel).

• Bulletin of the Society of Naval Architects of Korea
• /
• v.2 no.1
• /
• pp.9-14
• /
• 1965

Ship designers make every efforts to get faster ships in accordance with the development of the Naval Architecture. But for the speed lying over factor length ratio 2.5-3.0, we could put a powerful engine into the conventional round bottom displacement type vessels, but it is very difficult in view point of economy, weight and volume. The principal cause of these speed obstacles is the wave making resistance and researchers are trying to decrease this resistance. One of the resolving ways, planing hulls were applied to small high boats. Planing hull's advantage is not restricted to speed, but the workmanship of the planing hull is easier than those of displacement type vessels of round bottom. Planing hull, therefore, are widely applicable to the intermediate speed boats, which don't have enough high speed to take planing advantage, as well as high speed boats. We will discuss related phenomena of the planing hull in details and this paper we particularly interested in the interjection point(speed length ratio 3.0-3.5 by Mr. D. De Groots) between semi-planing and full planing hulls on the resistance characteristic curve. The paper by Prof. Keuck Chun Kim, "Some Characteristics of Straight Framed V-bottom Hull Forms", Journal of the society of Naval Architects of Korea, Vol.1, No.1, Dec.5, 1964, is referred to the V-bottom hull forms belonging to low speed region and determines practical applicable limit of the speed length ratio combined with construction costs, under which are still used by large commercial vessels. This is the interesting contrast between his and authors. We will further discuss the speed length ratio which is considered as a beginning point to planing effect. For this analysis, we choose 3 model ships: Model (1) and (2) have the same principal dimensions, model 3 varied dimension. Model (1) is full-planing hull, (2) is semi-planing hull and (3) is complete planing hull. They are aimed to collect proper design data for purposed ships.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.8 no.4
• /
• pp.301-311
• /
• 2016

This paper describes the whole procedures to determine ice-induced global loads on the ship using measured full-scale data in accordance with the method proposed by the Canadian Hydraulics Centre of the National Research Council of Canada. Ship motions of 6 degrees of freedom (dof) are found by processing the commercial sensor signals named Motion Pak II under the assumption of rigid body motion. Linear accelerations as well as angular rates were measured by Motion Pak II data. To eliminate the noise of the measured data and the staircase signals due to the resolution of the sensor, a band pass filter that passes frequencies between 0.001 and 0.6 Hz and cubic spline interpolation resampling had been applied. 6 dof motions were computed by the integrating and/or differentiating the filtered signals. Added mass and damping force of the ship had been computed by the 3-dimensional panel method under the assumption of zero frequency. Once the coefficients of hydrodynamic and hydrostatic data as well as all the 6 dof motion data had been obtained, global ice loads can be computed by solving the fully coupled 6 dof equations of motion. Full-scale data were acquired while the ARAON rammed old ice floes in the high Arctic. Estimated ice impact forces for two representative events showed 7e15 MN when ship operated in heavy ice conditions.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.5
• /
• pp.1-11
• /
• 2011

As the use of mobile multimedia devices is increasing in the recent year, the needs for high-performance multimedia processors are increasing. In this regard, we propose a SIMD (Single Instruction Multiple Data) based parallel processor that supports high-performance multimedia applications with low energy consumption. The proposed parallel processor consists of 16 processing elements (PEs) and operates on a 3-stage pipelining. Experimental results indicated that the proposed parallel processor outperforms conventional parallel processors in terms of performance. In addition, our proposed parallel processor outperforms commercial high-performance TI C6416 DSP in terms of performance (1.4-31.4x better) and energy efficiency (5.9-8.1x better) with same 130nm technology and 720 clock frequency. The proposed parallel processor was developed with verilog HDL and verified with a FPGA prototype system.

• International Commerce and Information Review
• /
• v.14 no.4
• /
• pp.563-582
• /
• 2012

In this paper, UPnP Network SaaS model has been studied. Currently, this model of UPnP Network and the trade mission is being used by outsourcing. From now on, the introduction of new trading systems and existing systems and the commercialization of this model as a UPnP network service connection should work. The future of UPnP network SaaS model will become commercially available software, commercial software can be accessed remotely via the Internet should be. Customer site activities must be managed from a central location. Application software architecture, pricing, partnerships, management should not include the character models. N should be the model. When used in small and medium enterprises have a very high value.