DOI QR코드

DOI QR Code

A study for roll damping performance of a platform supply vessel with or without bilge keel using CFD

전산유체역학을 이용한 해양작업지원선의 빌지킬 유무에 따른 횡동요 성능에 관한 연구

  • Seok, Jun (Division of Green-ship research, Research Institute of Medium & Small Shipbuilding) ;
  • Kim, Sung-Yong (Approval centre Korea, DNV-GL) ;
  • Yang, Young-Jun (Global Core Research Center for Ships and offshore Plants, Pusan National University) ;
  • Jin, Song-Han (Division of Green-ship research, Research Institute of Medium & Small Shipbuilding) ;
  • Park, Jong-Chun (Department of Naval Architecture & Ocean Engineering, Pusan National University)
  • Received : 2016.07.18
  • Accepted : 2016.11.08
  • Published : 2016.11.30

Abstract

In this study, numerical simulations on the effects of bilge keel on roll motion were conducted. The numerical simulations were performed on a 110 m class PSV using the commercial viscous flow analysis software Star-CCM+. Before conducting the study on the 110 m class PSV, an additional simulation of DTMB 5512 was performed and compared with the experimental results to validate the feasibility of the numerical simulation. In the simulation on PSV, a nondimensional damping coefficient was calculated using a free roll decay simulation, and the response amplitude operator (RAO) for the roll motion was calculated with a nondimensional damping coefficient at two conditions (with/without bilge keel).

본 연구에서는 상용 점성 유동 해석 소프트웨어인 Star-CCM+를 이용하여 110m급 해양작업지원선의 빌지킬 효과에 따른 횡동요 성능에 관한 연구를 수행하였다. 해양작업지원선에 관한 연구에 앞서 DTMB 5512 선형에 대한 수치 시뮬레이션을 통해 실험과 비교 검증하였다. 검증된 결과를 바탕으로 빌지킬 유무에 따른 해양작업지원선의 자유 횡동요 시뮬레이션을 수행하였으며, 이를 통해 각각의 무차원 감쇠 계수와 횡동요 응답진폭함수를 산출하였다.

Keywords

References

  1. Opinet, Available at : http://www.opinet.co.kr, Accessed January 5, 2016.
  2. Y. D. Ha, Offshore Structural Designs and Subsea System, 1st Edition, Seoul, Korea: GSintervision, 2015.
  3. K. C. Seo, O. S. Gim, Y. C. Ryu, M. Atlar, and G. W. Lee, "The evaluation of hydrodynamic resistance and motion response characteristics of platform supply vessel," Journal of the Korean Society of Marine Environment & Safety, vol. 19, no. 4, pp. 397-402, 2013. https://doi.org/10.7837/kosomes.2013.19.4.397
  4. N. W. Kim, Y. J. Kim, and Y. R. Ha, "Experimental study of the free roll decay test for the evaluation of roll damping coefficients," Journal of the Society of Naval Architects of Korea, vol. 52, no. 6, pp. 460-470, 2015. https://doi.org/10.3744/SNAK.2015.52.6.460
  5. M. Irvine, J. Longo, and F. Stern, "Forward speed calm water roll decay for surface combatant 5415: Global and local flow measurements," Journal of Ship Research, vol. 57, no. 4, pp. 202-219, 2013. https://doi.org/10.5957/JOSR.57.4.110043
  6. K. H. Jung, S. B. Suh, and H. H. Chun, "Experimental study on the eddy making damping effect at the roll motion of a rectangular barge," Journal of the Society of Naval Architects of Korea, vol. 44, no. 3, pp. 267-278, 2007. https://doi.org/10.3744/SNAK.2007.44.3.267
  7. J. H. Bae, C. B. Hong, and H. U. Kwak, "A study on 3D roll damping of a ship by numerical analysis using moving grid," Proceedings of the The Korean Association of Ocean Science and Technology Societies, pp. 632-640, 2009.
  8. J. H. Jung, H. S. Yoon, H. H. Chun, I. W. Lee, and H. Park, "Numerical simulation of wave interacting with a free rolling body," International Journal of Naval Architecture and Ocean Engineering, vol. 5, no. 3, pp. 333-347, 2013. https://doi.org/10.2478/IJNAOE-2013-0137
  9. J. K. Heo, J. C. Park, and M. H. Kim, "CFD analysis of two-dimensional floating body with moon pool under forced heave motion," Journal of Ocean Engineering and Technology, vol. 25, no. 2, pp. 36-46, 2011. https://doi.org/10.5574/KSOE.2011.25.2.036
  10. R. V. Wilson, P. M. Carrica, and F. Stern, "Unsteady RANS method for ship motions with application to roll for a surface combatant," Computers & fluids, vol. 35, no. 5, pp. 501-524, 2006. https://doi.org/10.1016/j.compfluid.2004.12.005
  11. I. R. Park, S. H. S. Hosseini, and F. Stern, "Numerical analysis of ship motions in beam sea using unsteady RANS and overset grid methods," Journal of the Society of Naval Architects of Korea, vol. 45, no. 2, pp. 109-123, 2008. https://doi.org/10.3744/SNAK.2008.45.2.109
  12. M. Araki, K. Ohashi, and N. Hirata, "An analysis of bilge keel effects using RANS with overset grids method," The 14th Inernational Ship Stability Workshop (ISSW), Kuala Lumpur, Malaysia, pp. 216-228, 2014.
  13. International Maritime Organization(IMO), Sub-committee on Stability and Load Lines and on Fishing Vessels(SLF), Review of the Intact Stavility Code-Head sea parametric rolling and its influence on container lashing systems. Submitted by the United states, SLF 45/6/7, 2002.
  14. International Maritime Organization(IMO), Sub-committee on Stability and Load Lines and on Fishing Vessels(SLF), Review of the Intact Stavility Code-Recordings of head sea parametric rolling on a PCTC. Submitted by Sweden, 47/INF.5, 2004.
  15. J. H. Vugts, "The Hydrodynamic Coefficients for Swaying, Heaving and Rolling of Cylinders in a Free Surface," Netherlands Ship Research Centre TNO Report 112 S, 1968.
  16. A. R. J. M. Lloyd, Seakeeping: Ship behaviour in rough weather. 2nd Edition, Ellis Horwood Limited, West Sussex. 1998.
  17. Iowa Institute of Hydraulic Research, 2010. Available at : http://www.iihr.uiowa.edu/shiphydro/efd-data/5512-roll-decay, Accessed January 2016.

Cited by

  1. Resistance Performance Map through Studies on the Dimension Parameters of the Bilge Keel attached on the Fishing Vessel vol.24, pp.5, 2018, https://doi.org/10.7837/kosomes.2018.24.5.583
  2. 전산유체역학을 이용한 2.99톤 어선의 부가물 부착에 따른 횡동요 성능 연구 vol.42, pp.4, 2016, https://doi.org/10.5916/jkosme.2018.42.4.293
  3. Numerical Study on the Improvement of the Motion Performance of a Light Buoy vol.34, pp.2, 2016, https://doi.org/10.26748/ksoe.2019.080
  4. Numerical Study to Evaluate Course-Keeping Ability in Regular Waves Using Weather Vaning Simulation vol.35, pp.1, 2016, https://doi.org/10.26748/ksoe.2020.033