• 제목/요약/키워드: Combustion test

검색결과 1,375건 처리시간 0.046초

CBT를 이용한 고체 추진제의 연소효율 도출 방법과 그레인 형상의 영향 분석 (Combustion Efficiency Estimation Method of Solid Propellants and the Effects of Grain Shape using Closed Bomb Test)

  • 박종근;성홍계;이원민;김은미
    • 한국추진공학회지
    • /
    • 제26권6호
    • /
    • pp.53-61
    • /
    • 2022
  • 본 연구에서는 CBT(Closed Bomb Test)시험을 통하여 고체추진제의 연소효율을 추정하는 방법을 제시하였다. CBT는 수백 기압에서 작동하므로 실기체의 영향을 고려하기 위해 Noble-Abel 상태방정식을 적용하였다. 또한 밀폐용기 벽면으로 발생하는 열손실을 고려하였다. 그레인의 연소로 인한 그레인의 체적 변화율 계산은 형상 함수(Form Function)를 적용하였으며, 총 8개의 다른 형태 그레인의 연소 효율을 도출하였다. 본 연구에서 제시한 이론모델의 적절성을 실험 결과인 압력-시간 선도와 비교하여 나타내었다. 그레인 형상과 추진제의 충진량에 따른 연소효율을 도출하였다.

RDF연소를 위한 순환유동층보일러개발 (Development of Circulating Fluidized Bed Boiler for Refused Derived Fuel)

  • 배달희;선도원
    • 한국연소학회:학술대회논문집
    • /
    • 한국연소학회 2005년도 제31회 KOSCO SYMPOSIUM 논문집
    • /
    • pp.71-77
    • /
    • 2005
  • Combustion of RDF and wastewater sludge was performed in a 0.1MWth bench scale circulating fluidized bed combustor(CFBC), Combustion characteristics of the RDF and sludge mixture demonstrated stable combustion conditions. Component analysis, Combustion characteristics was measured before and after the test, and applications for commercial 1MWe CFBC boiler were prepared. The release of hazardous components such as $SO_2$ and HCl was relatively low values of 50 and 150ppm, respectively.

  • PDF

잔사유 분무 연소 해석에 관한 연구 (Combustion Modeling of Vacuum Residue Fuel Sprays)

  • 최찬호;허강열
    • 한국연소학회:학술대회논문집
    • /
    • 한국연소학회 2004년도 제28회 KOSCO SYMPOSIUM 논문집
    • /
    • pp.207-214
    • /
    • 2004
  • Extra heavy vacuum residue oil has advantage as the fuel of a power plant in reducing the cost of power generation. Numerical study is conducted by the KIVA code to understand combustion, heat transfer and flow field characteristics in the test reactor. The combustion model of pulverized coal particles is adopted as the combustion process of extra heavy oil is similar to that of coal. As an initial phase of investigation parametric study is performed with respect to SMD and spray angle of injected spray droplets.

  • PDF

30톤급 액체로켓엔진 재생냉각 연소기 저압 연소시험 결과 (Low Pressure Test Results of Regenerative Cooling Combustion Chamber for 30tonf-Class Liquid Rocket Engine)

  • 한영민;김종규;이광진;임병직;안규복;김문기;서성현;최환석
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2009년도 춘계학술대회 논문집
    • /
    • pp.71-75
    • /
    • 2009
  • 30톤급 액체로켓엔진 재생냉각 연소기에서 넓은 영역에서의 연소기 작동성 및 연소성능 등을 확인하기 위한 저압 및 설계/탈설계점 연소시험 결과에 대해 기술하였다. 연소기의 연소압력은 60 bar, 추진제 유량은 약 89 kg/s 그리고 노즐 팽창비는 12이다. 연소특성속도에 대한 압력의 영향은 혼합비에 따라 크게 나타났다. 연소기의 비추력은 혼합비에 크게 영향을 받지 않았고 압력에 비례함을 알 수 있었다. 본 결과는 향후 대형 연소기에서 저압 연소시험의 가능성을 제시할 뿐만 아니라 대형 연소기의 고압 연소압력에서의 연소성능을 예측하는 기본 데이터로 활용될 수 있을 것이다.

  • PDF

실물형 재생냉각 액체로켓엔진 연소기(확대비3.5) 연소시험 (Combustion Test of Regenerative Cooling Combustor for Liquid Rocket Engine)

  • 양승호;김희태;강동혁;안규복;서성현;한영민;최환석
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2007년도 제29회 추계학술대회논문집
    • /
    • pp.125-130
    • /
    • 2007
  • 추력 30톤급 액체로켓엔진의 실물형 연소기에 케로신을 이용한 재생냉각 방식을 적용하여 연소시험을 수행하였다. 30톤급 실물형 연소기로는 처음으로 연소기 헤드와 연소실이 일체형으로 제작되었으며, 연소성능 및 재생냉각 성능, 그리고 연소기 내구성 확인을 위하여 여러 차례 연소시험이 수행되었다. 본 논문에서는 연소압력 68 bar 혼합비 2.8의 탈설계점 조건과 연소압력 60 bar, 혼합비 2.5의 설계점 조건을 적용한 연소시험의 성능결과에 대하여 기술하였다. 각각의 연소시험 결과 연소성능 및 연소안정성, 그리고 연소기 내구성 측면에서 충분히 성공적인 데이터를 얻었으며, 이로써 30톤급 액체로켓엔진 케로신 재생냉각 연소기 개발의 기술적인 검증을 완료했다는 의미를 부여할 수 있게 되었다.

  • PDF

DME와 메탄의 GE7EA 모사가스터빈 연소성능시험 (GE7EA Gas Turbine Combustion Performance Test of DME and Methane)

  • 이민철;서석빈;정재화;주용진;안달홍
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2007년도 춘계학술대회B
    • /
    • pp.3270-3275
    • /
    • 2007
  • DME (Dimethyl Ether, $CH_3OCH_3$) has highly attracted attention as an alternative fuel for transportation, power generation and LPG substitute owing to its easy transportation and cleanliness. This study was conducted to verify the combustion performance and to identify potential problems when DME is fuelled to a gas turbine. GE7EA gas turbine of Pyong-Tak power plant was selected as a target to apply the DME. Combustion tests were conducted by comparing DME with methane, which is a major component of natural gas, in terms of combustion instability, $NO_X$ and CO emissions, and the outlet temperature of the combustion chamber. The results of the performance tests show that DME is very clean but has a low combustion efficiency in low load condition. From the results of the fuel nozzle temperature we have ascertained that DME is easy to flash back, and this property should be considered when operating a gas turbine and retrofitting a burner.

  • PDF

Combustion Stability Characteristics of the Model Chamber with Various Configurations of Triplet Impinging-Jet Injectors

  • Sohn Chae-Hoon;Seol Woo-Seok;Shibanov Alexander A.
    • Journal of Mechanical Science and Technology
    • /
    • 제20권6호
    • /
    • pp.874-881
    • /
    • 2006
  • Combustion stability characteristics in actual full-scale combustion chamber of a rocket engine are investigated by experimental tests with the model (sub-scale) chamber. The present hot-fire tests adopt the combustion chamber with three configurations of triplet impinging-jet injectors such as F-O-O-F, F-O-F, and O-F-O configurations. Combustion stability bound-aries are obtained and presented by the parameters of combustion-chamber pressure and mixture (oxidizer/fuel) ratio. From the experimental tests, two instability regions are observed and the pressure oscillations have the similar patterns irrespective of injector configuration. But, the O-F-O injector configuration shows broader upper-instability region than the other configurations. To verify the instability mechanism for the lower and upper instability regions, air-purge acoustic test is conducted and the photograph or the flames is taken. As a result, it is found that the pressure oscillations in the two regions can be characterized by the first impinging point of hydraulic jets and pre-blowout combustion, respectively.

자동차용 모바일 폰 충전 케이블의 발화 안전성에 관한 연구 (A Study on safety against a fire of charging cable for mobile phone for vehicle)

  • 권진욱;최규식;황명환
    • 대한안전경영과학회지
    • /
    • 제20권3호
    • /
    • pp.21-26
    • /
    • 2018
  • This paper describes result of a study on safety against a fire of charging cable for mobile phone for vehicle. Combustion on the USB cable in the car was happened while driving. Gas coming from the burning USB cable could be a reason which can make a secondary car accident since the driver also can be embarrassed while driving. In order to prevent a secondary car accident connected on the road, to research a reason why USB cable can emit gas and be burned in charging. We did simulation test with abnormal fault condition for the electronic component on the board in the USB cable. So we get the result from abnormal fault condition simulation test, for instance, shorted test for output terminal of 8 pin switch, shorted test for chip resistor after thermal aging in the condition $25^{\circ}C$, 93 % RH during 48 hours. To analysis the result of all test, Combustion on the USB cable was not the 8 pin but other electrical component such as a chip resistor. Therefore we guess that the reason for USB cable combustion in charging in a car was not 8 pin and a LED but another defective component.

실물형 액체로켓엔진 연소기 케로신냉각 연소시험 성능결과 (Combustion Performance of a Full-scale Liquid Rocket Thrust Chamber Using Kerosene as Coolant)

  • 한영민;김종규;문일윤;서성현;최환석;이수용
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2006년도 제27회 추계학술대회논문집
    • /
    • pp.163-168
    • /
    • 2006
  • 본 논문에서는 추력 30톤급 액체로켓엔진의 실물형 연소기 물냉각 연소시험 성능결과에 대해 기술하였다. 연소기 연소압력은 53bara 그리고 추진제 유량은 90kg/s이다. 케로신을 이용한 첫 번째 시험인 관계로 설계유량보다 약 120%정도인 32kg/s을 공급하면서 시험을 수행하였다. 이후 설계 케로신 유량 25kg/s을 공급하면서 성공적으로 시험을 수행하였다. 각각의 연소시험 결과에 대해 기술하였으며, 채널 연소실에서 케로신 냉각 성능이 충분해 재생 냉각 연소시험이 가능하다는 것을 알 수 있었다.

  • PDF

연소기 연소시험설비 고주파 계측 시스템 설계 (Design of High-Frequency Data Acquisition System for Combustor Combustion Test Facility)

  • 안규복;강동혁;최환석
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2012년도 제38회 춘계학술대회논문집
    • /
    • pp.461-464
    • /
    • 2012
  • 한국형발사체 3단에 사용될 7톤급 액체로켓엔진 연소기의 연소시험을 위해 기존 지상연소시험장 고주파 계측 시스템을 개량하였다. 본 논문에서는 개량된 고주파 계측 시스템의 설계 및 주요 기능을 설명하였다.

  • PDF