• 청정기술
• /
• 제25권4호
• /
• pp.331-335
• /
• 2019

전 세계적으로 환경오염에 대한 관심이 높아지고 있으며, 이를 해결하기 위한 기술개발 또한 활발하게 이루어지고 있다. 특히 열을 사용하는 분야에서는 연소로 인해 대기환경 오염물질이 많이 발생하고 있는 상황이다. 연소 촉매는 완전 연소와 연소온도를 낮춰 NOx와 CO를 줄이는 기술이다. 기존 연소 촉매는 귀금속 촉매를 사용하여 값이 비싸고 합성공정이 복잡하다. 본 연구는 요소를 이용하여 고온 연소촉매인 헥사알루미네이트를 제조하였으며, 합성시간에 따른 물성을 조사하였다. 그리고 이 촉매를 이용하여 연소 성능 및 특성을 평가하였다. 온도가 증가하면서 변화하는 메탄 전환율은 두 가지 패턴으로 나타났다. 1 h, 9 h, 12 h의 전환율이 비슷하게 나타났고, 3 h, 6 h의 전환율이 유사한 패턴을 나타내었다. 합성시간이 6 h에서 9 h으로 증가하면서 메탄 연소 성능이 급격하게 증가하였으며, T50이 되는 온도는 약 745 ℃로 나타났다. 9 h 합성된 연소촉매의 성능이 가장 우수하게 나타났으며, 이 연소촉매의 NOx 배출은 없었고, CO의 최대 배출량은 72 ppm으로 나타났다.

• 기술사
• /
• 제5권19호
• /
• pp.3-16
• /
• 1972

1. Purposes and importances of the study. In gaining heating resources by combustion of briquette, which is the necessaries of every day's life, victims occur from poisonous affection of combustion gas (carbon mono-oxide) in every year and this gas attributable to increase death rate proportion to the high demand of briquette usage. It arise great problem ill point of national sanitation. Therefore, the study has a big aim to accomplish depressing CO gas or stimulating comlete combustion by both the methods of physical improvement of present combustion devices and chemical improvement by using V$_2$O$\sub$5/ catalyst to depress CO gas or fasten complete combustion Progress. Sucessful result of this study will not only to decrease the death rate but also to contribute fearless handling of briquette combustion so as to perform improving public Welfare. 2. Contents and scope of study. A. comparison of present and improved fuel hole device. B. Examination of effectness of improved elements. C. Effectness of miffed usage of catalyst. D. Comparison of Catalyst effectness. E. Examination of effectness of black slate containing V$_2$O$\sub$5/. 3. Results and recommendations of the study A. Absolute necessity of supplying secondary air by improved combustion device. B. Oxide Vanadium (V$_2$O$\sub$5/) has the greatest effectness to eliminate CO gas. C. Most effective catalyst of V$_2$O$\sub$5/ containing slate comes from "Samgoe" coal mine. D. By plastering catalyst on the cover plate of fire hole, it stimulate chemical reaction of re-combustion and preserving heat. E. Recommend to continute further precise study to practice with low-cost and handy devices to be applied the study results.

• Korean Chemical Engineering Research
• /
• 제56권2호
• /
• pp.281-290
• /
• 2018

최근 선진국을 중심으로 고연비-저배출 내연기관 (디젤) 자동차 보급의 필요성이 대두되면서 기존 촉매후처리 장치의 저온성능 강화를 위한 기술적 방안들이 시급히 요구되고 있다. 본 논문에서는 디젤엔진 배출 탄소입자상 물질의 연소반응에 있어 연료함유 촉매(Fuel-Borne Catalyst)와 페로브스카이트(Perovskite)의 복합촉매 시스템이 보이는 상용모델촉매 대비 우수한 저온 연소성능과 이의 Perovskite 촉매 조성에 대한 의존성에 관해 논하였다. Fe/Ce 계열 연료함유 촉매가 A-site 원소(La)에 K이 부분치환되고, B-site 금속이 Fe인 Perovskite 촉매와 복합화될 때 상대적으로 우수한 저온 연소성능 개선효과가 관찰되었다. 이를 관찰하기 위해 연료함유 촉매가 함유되거나 함유하지 않은 탄소 입자상 물질과 다양한 조성의 La 계열 Perovskite 촉매를 혼합한 고정층에 대한 온도상승 산화반응 실험(Temperature-Programmed Oxidation)을 수행하였으며, 이산화탄소 생성과 질소산화물 농도 저하 패턴의 연동특성을 통해 두 촉매의 상호 연계작용을 유추하였다.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2002년도 제25회 KOSCI SYMPOSIUM 논문집
• /
• pp.71-79
• /
• 2002

The characteristics of the catalytically supported combustion with Pd and Pd/Pt based catalyst using the bench-scaled high pressure combustor have been investigated up to 5atm. This study aimed to investigate combustion characteristics of the stable flame attached to the exit of catalyst bed and NOx emissions with respect to the position of axial and radial direction in the combustor. NOx emissions were increased along the axial distance after the catalyst bed exit and radially decreased from the center to the wall of the combustor. At the higher pressure, the NOx emission decreased slightly due to the lower flame temperature in the combustor at the high pressure.

• 유기물자원화
• /
• 제14권1호
• /
• pp.169-177
• /
• 2006

본 연구에서는 휘발성 유기 화합물의 촉매연소에 의한 제거 반응에 대하여 조사 하였다. 촉매와 VOC의 접촉형태(공간속도 및 촉매층의 높이)에 따라 완전연소온도가 조금씩 달라지며 공간속도(SV)는 처리가스의 유량(Q, $m^3/hr$)을 촉매 층의 부피(V,$m^3$)로 나눈 값(SV=Q/V)을 나타내는 값으로, 촉매연소 장치에서는 보통 $10,000{\sim}50,000hr^{-1}$을 유지한다 열교환기를 통한 VOC는 수소염 이온화 검출기를 통하여 농도를 측정하였으며 반응온도는 373K-423K에서 촉매를 활성화 시켜 VOC 농도의 제거효율을 측정하였다. 농도측정은 100회 이상하여 제거효율을 조사 하였다. 자동차 도장시설에서 VOC 배출농도는 63.37 ppm 이며 373K 촉매 활성시 제거율은 평균 70% 이며 423K 촉매 활성시 제거효율은 78.92% 이었다. 반응농도가 증가할수록 제거효율은 증가하는 경향이었다.

• 한국대기환경학회지
• /
• 제18권3호
• /
• pp.205-212
• /
• 2002

The catalytic combustion of benzene, toluene and xylene over Pt-based catalyst was investigated in a fixed bed flow reactor system with atmospheric pressure to recycle the waste industrial catalyst for the processes of removing volatile organic compounds. According to the pretreatment condition, the properties of the waste Pt-based catalyst were characterized by XRD (X-ray diffraction) and BET (Brunauer-Emmett-Toller). In the carte of air pretreatment, 20$0^{\circ}C$ was found to be optimal, and increasing pretreatment temperature resulted in the reduction of the catalytic activity. When Pt-based catalyst pretreated at 20$0^{\circ}C$ by alto was retreated by hydrogen, the catalytic activity increased by increasing treatment temperature. In the case of HNO$_3$aqueous solution pretreatment, the catalytic activity decreased by increasing the concentration of HNO$_3$aqueous solution. The catalytic activity was seen to observe the following sequence : benzene > toluene > xylene.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2006년도 제33회 KOSCO SYMPOSIUM 논문집
• /
• pp.235-241
• /
• 2006

Catalytic combustion is one of the suitable methods for micro power source due to high energy density and no flame quenching. Catalyst loading in the micro structured combustion chamber is one of the most important issues in the development of micro catalytic combustors. In this research, to coat catalyst on the chamber wall, two methods were investigated. First, $Al_2O_3$ was selected as a support of Pt and $Pt/Al_2O_3$ was synthesized through the alumina sol-gel procedure. To improve the coating thickness and adhesion between catalyst and substrate, heat resistant and water solvable organic-inorganic hybrid binder was used. Porous silicon was also investigated as a catalyst support for platinum. Through the parametric studies of current density and etching time, fabrication process of $1{\sim}2{\mu}m$ of diameter and about $25{\mu}m$ depth pores was confirmed. Coated substrates were test in the micro channel combustor which was fabricated by the wet etching and machining of SUS 304. Using $Pt/Al_2O_3$ coated substrate and Pt coated porous silicon substrate, conversion rate of fuel was over 95% for $H_2$/Air premixed gas.

• 한국연소학회:학술대회논문집
• /
• 대한연소학회 2003년도 제27회 KOSCO SYMPOSIUM 논문집
• /
• pp.265-272
• /
• 2003

Some catalytic reactors for industrial/generation gas turbines were reviewed and investigated to understand the current status and future prospect for ultra low NOx catalytic gas turbine combustor. Catalytic reactor which was applied to 1${\sim}$10MW class gas turbine has achieved the ultra low emission corresponding to less than 3ppm NOx and 10ppm CO. But the durability and sizing flexibility of catalyst is needed to improve the catalyst performance for commercial gas turbine operation.

• Environmental Engineering Research
• /
• 제10권3호
• /
• pp.131-137
• /
• 2005

The catalytic activity of precious metals(Rh, Pd, Pt) and nickel catalysts supported on ${\gamma}-Al_2O_3\;and\;CeO_2$ in the partial combustion of methane(PCM) to syngas was investigated based on the product distribution in a fixed bed now reactor under atmospheric condition and also on analysis results by SEM, XPS, TPD, BET, and XRD. The activity of the catalysts based on the syngas yield increased in the sequence $Rh(5)/CeO_2{\geq}Ni(5)/CeO_2>>Rh(5)/Al_2O_3>Pd(5)/Al_2O_3>Ni(5)/Al_2O_3$. Compared to the precious catalysts, the syngas yield and stability of the $Ni(5)/CeO_2$ catalyst were almost similar to $(5)/CeO_2$ catalyst, and superior to these of any other catalysts. The syngas yield of $Ni(5)/CeO_2$ catalyst was 90.66% at 1023 K. It could be suggested to be the redox cycle of the successive reaction and formation of active site, $Ni^{2-}$ and the lattice oxygen, $O^{2-}$ produced due to reduction of $Ce^{4-}$ to $Ce^{3-}$.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2017년도 제48회 춘계학술대회논문집
• /
• pp.757-763
• /
• 2017

본 연구에서는 50 mN급 마이크로 추력기를 활용하여, ADN 기반 추진제인 LMP-103S의 연소 실험을 수행하였다. 마이크로 추력기는 MEMS 공정 과정을 거쳐 감광유리로 제작하였다. LMP-103S 분해용 촉매로 $Pt/{\gamma}-Al_2O_3$를 사용하였다. 연소 실험 초기에 촉매 예열을 위해 90 wt.% 과산화수소를 주입하였으며, 이후 LMP-103S를 주입하여 연소 실험을 수행하였다. 실험 결과 백금 촉매 환경에서 LMP-103S의 점화가 이루어짐을 확인하였으며, 연소실 온도는 $650^{\circ}C$로 형성되었다.