• 제목/요약/키워드: Combine

검색결과 2,800건 처리시간 0.043초

벼 수확 후 수분함량별 건조지연에 따른 쌀 품위 및 화학성 (The Rice Quality and Chemical Characteristics Affected by Moisture Content and Drying Delay Time after Harvest in Rice)

  • 권석주;송은주;권영립;최동칠;최영근;권태오
    • 한국작물학회지
    • /
    • 제51권spc1호
    • /
    • pp.35-41
    • /
    • 2006
  • 쌀 품질의 고급화를 위한 벼 수확 후 관리기술체계를 확립하기 위하여 벼 수확을 대형포대 및 콤바인포대로 수확한 후 수분함량 별 야적기간 연장에 따른 쌀 품위 및 품질변화에 미치는 영향을 조사였다. 수확당일 수확시간에 따른 정조의 수분함량은 $23.7{\sim}28.8%$로 수확시간이 늦어질수록 낮았고, 수확 후 건조지연에 따른 정조의 외관변화는 저장포대가 대형인 경우 3일째 정조의 색깔이 변하고 악취가 심하게 발생하였으며 콤바인포대는 4일째부터 색깔이 변하고 악취가 발생하였다. 포대내부의 온도변화는 대형포대는 저장기간이 길어질수록 그리고 수분함량이 높을수록 증가되는 폭이 컸으나 콤바인포대는 수확당시 수분함량에 따라 일정한 비율로 증가되는 경향이었다. 대형포대에 저장된 정조의 수분함량은 저장 2일째부터 증가되었고 수분함량이 높을수록 증가폭이 컸으나 콤바인포대의 경우는 수확 시 수분함량이 적은 경우 약간 감소하는 경향이고 높은 경우는 약간 증가되는 경향이었다. 수확 후 건조가 지연될수록 단백질, 아밀로스함량은 차이가 없으나 지방산은 증가되었고 대형포대가 콤바인포대에 저장된 정조보다 지방산 증가폭이 컸으며 수확 후 건조지연일수나 벼 수확 시 수분함량이 높을수록 현미의 완전미율은 감소되고 청미와 피해립율이 증가되었으며 백미품위 역시 비슷한 경향이었다. 따라서 미질저하를 최소화 할 수 있는 포대종류별 건조지연 한계기는 대형포대가 벼 수확 후 $1{\sim}2$일 이내, 콤바인포대는 $2{\sim}3$일 이내로 추정되었다.

핵심 농기계(트랙터, 콤바인 및 이앙기) 이용 및 수리실태 분석 (Analysis of Utilization and Maintenance of Major Agricultural machinery (Tractor, Combine Harvester and Rice Transplanter))

  • 홍성하;최규홍
    • 한국국제농업개발학회지
    • /
    • 제30권4호
    • /
    • pp.292-299
    • /
    • 2018
  • 농가의 핵심 농기계 이용 만족도를 조사 분석한 결과, 수입산이 국산 대비 트랙터는 1.2배, 콤바인 1.3배, 이앙기 1.4배 높은 것으로 나타났다. 즉 가격과 사후봉사를 제외한 작업성능, 조작편이성, 내구성, 고장빈도에서 높은 만족도를 보였고, 이는 전자유압제어, 파워트레인 및 변속기 설계, 신소재, 저소음 캐빈 등 기술수준의 차이가 반영된 결과로 여겨진다. 국산 농기계의 품질향상을 통한 적극적인 대응이 필요한 것으로 판단된다. 대리점을 대상으로 한 핵심 농기계의 부품 및 소모품에서 고장 수리 빈도수가 높게 나타났다. 트랙터는 주요 4개 부위에서 85.3%, 콤바인은 5개 부위에서 89.6%, 이앙기는 3개 부위에서 80.5%가 발생한 것으로 분석되었다. 그리고 제조사를 대상으로 한 수입산 대비 국산의 기술수준이 중소형 트랙터, 4조 콤바인 및 6조 이앙기는 근접하였으나, 트랙터는 60-100%, 콤바인 70-100%, 이앙기 70-95%로 평가되었다. 또한 국산의 문제점으로 트랙터는 내구성과 조작편이성, 콤바인은 내구성, 이앙기는 조작편이성을 가장 큰 문제로 인식되고 있다. 농가, 대리점 및 제조사의 조사결과를 종합해보면, 농가 및 대리점에서는 품질 개선과 내구성 향상이 시급하다고 응답하는 반면에, 제조업체는 주로 작업성능과 조작편이성 향상 기술개발에 역점을 두고 있어 현장과 괴리감을 보였다. 따라서 제조사에서는 농가와 대리점의 애로사항을 설계 생산에 적극 반영해야 할 것으로 판단된다. 특히, 수입산 농기계 대비 국산의 가장 큰 문제점은 잔고장으로 대표되는 품질 문제로 분석되었다. 이는 제조사 입장에서 농기계 판매의 계절성에 따른 경영악화와 소량 생산으로 인한 한정적인 제품원가 절감요소가 낳은 결과로 판단된다. 제조사 입장에서는 시장의 가격경쟁력 강화를 위해 자체적으로 기종별 부품 공용화와 다량 구매 부품의 원가절감 전략을 구사하고 있는데, 이로 인해 오히려 품질 저하와 농가 불만 증가를 초래, 점진적인 시장점유율 하락을 인지하면서도 부품개발 등에 적극적으로 대응하지 못하고 있는 것으로 나타났다. 결론적으로 국산 농기계 부품의 신뢰성 및 내구성 시험 강화를 위해 일본 수준의 시험검정과 연속시험 보완이 필요하며, 농가 보호를 위해 고장 수리 빈도수가 높은 주요 부품에 대한 정례적인 사후검정기준 마련 등 제도적 보완이 필요할 것으로 판단된다. 또한 국내 농기계산업의 활성화와 국산농기계의 국내외 시장경쟁력 강화를 위해, 현재 시점에서 정책적으로 제조사와 부품 제조업체를 포함하는 공용부품 개발, 제조 및 공급을 위한 농기계부품연구원의 설립이 절대적으로 필요한 시기로 판단된다.

Effect of different plant densities on growth and yield of sorghum(Sorghum bicolor L. Moench.)

  • Cho, Young Dae;Jung, Ki Yuol;Chun, Hyun Chung;Lee, Sang Hun;Kang, Hang Won
    • 한국작물학회:학술대회논문집
    • /
    • 한국작물학회 2017년도 9th Asian Crop Science Association conference
    • /
    • pp.206-206
    • /
    • 2017
  • Sorghum is a crop with a various plant height depending on the planting density. If the height exceeds 1.8m, which is the harvestable height of the combine, loss is caused by clogging of the installation, entrance of the threshing section and the threshing section. The purpose of this study is to set the planting distance and number of plants per hill suitable for combine harvesting as the plant length does not exceed 1.8m. The experimental variety was Nampungchal. The experiment design was a split-plot design with three replications. The treatments were as follow: Main-plot were 1 and 2 plants as number of plants per hill and sub-plots were $60{\times}20cm$ (practice), $70{\times}15$, 20, 25, 30 cm as planting distance. The amount of nitrogen, phosphate and potassium fertilization were 100, 70, $80kg\;ha^{-1}$. Data were collected: (1) grain yield: weight of grain in $kg\;ha^{-1}$, (2) 1000 grain weight: average weight of 1000 grain, (3) plant height: distance from soil to top of panicle, (4) ear length: distance from top of stem to top of ear in cm, (5) stem diameter: diameter of second internode, (6) tiller number per hill. Analyses of variance were performed using R version 3.3.1(https://www. r- project. org). The Duncan's multiple range test(DMR) was used to separate treatment means at P < 0.05. As number of plants per hill increased, plant height and yield increased and tiller number decreased. As planting distance increased, plant height and yield decreased and tiller number increased. At 1 plant per hill, the plant height did not exceed 1.8m at all planting distance. At 2 plants per hill, the plant height did not exceed 1.8m from the planting distance of $70{\times}25cm$. At 1 plant per hill, the tiller number increased to 0.23, 0.27, 0.60 and 0.70 as the planting distance increased to $70{\times}15$, 20, 25 and 30 cm, respectively. At 2 plants per hill, the tiller number increased to 0.03, 0.03, 0.14 and 0.40 as the planting distance increased to $70{\times}15$, 20, 25 and 30 cm, respectively. At 1 plant per hill, the yield decreased to 6030, 4280, 3400 and $3230kg\;ha^{-1}$ as the planting distance increased. At 2 plant per hill, the yield decreased to 7850, 5770, 5720 and $4960kg\;ha^{-1}$ as the planting distance increased. We recommend that the optimum number of plants per hill and planting distance is 2 and $70{\times}25cm$ suitable for combine harvesting.

  • PDF

조류(藻類)제어를 위한 실용적 신기술 : K-water 녹조수상콤바인 (A Practical New Technology of Removing Algal Bloom: K-water GATe Water Combine)

  • 신재기;김호준;김세원;정선아;문병천;이상협;최재우
    • 생태와환경
    • /
    • 제47권3호
    • /
    • pp.214-218
    • /
    • 2014
  • 본 연구노트는 K-water가 고안하여 개발한 녹조수상 콤바인 장치에 대하여 소개하고자 하였다. 녹조제거장치는 본체와 부력재, 이송호퍼, 스크린 컨베이어, 슬러지 제거기 및 수거물질 분리대 등 총 5개 모듈로 구성되어 있다. 그리고 스컴성 녹조현상 이하일 때 녹조제거제를 전처리할 수 있는 살포기가 별도로 장착되어 있다. 전반적으로 본 장치의 모듈 시스템은 매우 간단하다. 2014년 5월부터 7월까지 낙동강 및 대청호 현장에서 테스트 운영한 결과, 1일 처리할 수 있는 수표면적은 $500,000m^2day^{-1}$에 해당하였다. 그리고 장치 적용 전후 처리효율은 90%를 상회하였고, 수처리량은 수질 상태에 따라 차이가 있지만 $500,000m^3day^{-1}$은 가능하였다. 또한 장치의 운영기간은 3월~11월(9개월) 동안으로써 기존 계획보다 연장될 수 있었다. 본 장치 및 기술을 통해 상수원과 공공수역의 녹조현상 및 사회문제로 확대된 파급 영향을 해결하는 데 기여할 수 있는 신기술로서 활용되기를 기대한다.

Bayesian Analysis of Randomized Response Models : A Gibbs Sampling Approach

  • Oh, Man-Suk
    • Journal of the Korean Statistical Society
    • /
    • 제23권2호
    • /
    • pp.463-482
    • /
    • 1994
  • In Bayesian analysis of randomized response models, the likelihood function does not combine tractably with typical priors for the parameters of interest, causing computational difficulties in posterior analysis of the parameters of interest. In this article, the difficulties are solved by introducing appropriate latent variables to the model and using the Gibbs sampling algorithm.

  • PDF

Adaptive Multitorch Multipass SAW

  • Moon, H.S.;Beattie, R.J.
    • International Journal of Korean Welding Society
    • /
    • 제1권1호
    • /
    • pp.1-6
    • /
    • 2001
  • This paper describes several advances in sensor and process control techniques for applications in Submerged Arc Welding (SAW), which combine to give a fully automatic system capable of controlling and adapting the overall welding process. This technology has been applied in longitudinal and spiral pipe mills and in pressure vessel production.

  • PDF