• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.848-853
• /
• 2001

Electrostatic actuation was adopted for ease of fabrication. We proposed a new driving scheme that uses the vector sum of force generated by comb-finger and by parallel plate. The moving and fixed electrodes are arranged to maximize the driving force. In this paper, an electrostatic field analysis is performed by Maxwell analysis tool for micro actuators. From the analysis, a comb-parallel type micro-actuator with 4${\mu}{\textrm}{m}$ width, 6${\mu}{\textrm}{m}$ overlap and 45${\mu}{\textrm}{m}$ height could be designed. In order to compare the new type of actuator with the conventional comb type of actuator, we arranged that both types have the same area and the same number of actuators. To make a high aspect ratio structure, we are developing fabrication process using SU-8 and electro-plating.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.373-378
• /
• 2004

Recently the electrostatic 2-axis MEMS stages have been fabricated for the purpose of an application to PSD (Probebased Storage Device). However, most of them have low area efficiency, which is undesirable as data storage devices, since all of the components (springs, comb electrodes, anchors, platform, etc.) are placed in-plane. In this paper, we present a novel structure of electrostatic 2-axis MEMS stage that is characterized by having large area platform. For large area efficiency, the actuator part consisting of mainly comb electrodes and springs is placed right below the platform. In this article, the structures and operational principle of the MEMS stages are described, followed by design procedure, structural and modal analysis using FEM(Finite Element Method). The area efficiency of the MEMS stage was designed to be about 55％, that is very large compared with conventional ones having a few percentage.

• Asian-Australasian Journal of Animal Sciences
• /
• v.16 no.1
• /
• pp.50-56
• /
• 2003

An experiment was carried out to compare the body weight, shank length, rectal temperature, comb area, abdominal fat, blood parameters and bone traits of capon, slip and intact birds in Taiwan country chicken cockerels. One hundred and sixty-six Taiwan country chicken cockerels were randomly assigned to caponized or intact male groups. Caponized birds were surgically altered at 10 weeks old and raised to 28 weeks old. At 28 weeks of age, the capons were separated into capon and slip groups, depending on the atrophy of the comb and wattle in size. The results showed that body weight and shank length in slips were significantly (p<0.05) greater than in intact birds. Intact birds had the highest (p<0.05）feather scores and the lowest (p<0.05) rectal temperature. Compared with intact birds and slips, capons had a significantly (p<0.05) smaller comb area. Bone percentage, stress and cortical thickness, and bone and ash calcium content and plasma testosterone concentration, in intact birds were the highest (p<0.05) followed by slips and capons. However, intact birds had the lowest (p<0.05) plasma ionized calcium and phosphorus concentrations. Bone and ash manganese contents in capons were significantly (p<0.05)lower than those in others. These findings support the hypothesis that androgenic effects on secondary sexual characteristics are stronger than anabolic growth promoting response. Androgens can directly influence calcium fluxes in male chickens. Caponized caused a reduction in the bone percentage, stress, cortical thickness and bone calcium content.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.15 no.3
• /
• pp.82-90
• /
• 2006

Recently the electrostatic 2-axis MEMS stages have been fabricated for the purpose of an application to PSD (Probe-based Storage Device). However, all of the components(platform, comb electrodes, springs, anchors, etc.) in those stages are placed in-plane so that they have low areal efficienceis, which is undesirable as data storage devices. In this paper, we present a novel structure of an electrostatic 2-axis MEMS stage that is characterized by having large area platform. for obtaining large area efficiency, the actuator part consisting of mainly comb electrodes and springs is placed right below the platform. The structure and operational principle of the MEMS stage are described, followed by a design procedure, structural and modal analyses using FEM(Finite Element Method). The areal efficiency of the MEMS stage was designed to be about 25%, which is very large compared with the conventional ones having a few percentage.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.20 no.2
• /
• pp.311-322
• /
• 1996

To accomodate workers with efficient mobility, coveralls were redesigned, construted and evaluated. In this study, especially, image processing techniques were applied to the evaluation stage, to quantify thE ease of body movement. For the initial observation stage, car-center workers were interviewed and their movements were videotaped. By analyzing the videotape, the area of stress and strains on the work clothes were marked on the figure chert and considered for the pattern making. 4DM cut pattern were applied to the upper part of the work clothes and other alternations were made throughout the problem area. Honey comb slashes were made on the problem area of the original and newly designed coveralls. Open areas of honey comb slashes due to body movement between the original and newly designed coveralls were analyzed by image processing techniques. Other objective and subjective evaluation of newly designed coveralls was compared with the original one. Overall evaluation of functionally designed coveralls was appered to be positive and the image processing techiques were useful methology to quantify the amount of stress in this study.

• Journal of Satellite, Information and Communications
• /
• v.10 no.2
• /
• pp.86-89
• /
• 2015

Formula acoustic characteristics of the room with a double layer, are compared through simulation and actual measurement. The rear area of the under- balcony speakers will cause a delay difference between the main speaker. In the mid / bass parts do not generate sufficient pressure is lowered and comb-Filtering phenomenon occurs significantly. The lower right area of the under- balcony speakers and speaker distance is the sound pressure of the under- balcony speakers to around 2 ~ 3m bigger than the main speakers and the sound image matches the pulpit is broken. Also, under area is more than 5 ~ 6m from the balcony outside speakers and causes differ by more than 10dB lower than the under- balcony speakers depending on the local laws of Translator wins Well, the main speaker at mid / high frequency sounds do not enter the sound pressure variations will drop by a significant. Appropriate arrangement and the output of the speaker according to the position under the balcony, and output of the main speakers are requested to minimize this problem sound. The proper sound design direction for the under- balcony speakers must be presented in order to improve the lower balcony area more pleasant acoustic environment.

• The Journal of the Convergence on Culture Technology
• /
• v.6 no.3
• /
• pp.427-430
• /
• 2020

The multi-channel analog signal to digital signal conversion is increasing in the field of IoT and medical measurement equipments. It has chip area and power consumption constraints to use a few single or 2_channel ADC for multi_channel application. This paper described to design and implement a proposed comb filter for multi-channel, 24bit ADC. The function of proposed comb filter is verified by matlab simulation and the FPGA test board. It was fabricated using SK Hynix 0.35㎛ CMOS standard process. The performance and chip size is compared with the existing design method that uses integrator/differentiator and FIR construction. The proposed comb filter is expected to use the IoT product and medical measurement equipments that require multi-channel, low power consumption and small hardware size.

• Journal of the Korean institute of surface engineering
• /
• v.39 no.3
• /
• pp.142-146
• /
• 2006

A novel internal-type linear inductive antenna, which we refer to as a double comb-type antenna, was developed for a large-area plasma source with substrate size of $880\;mm{\times}660\;mm$ ($4^{th}$ generation glass size). In this study, effect of plasma confinement by applying multi-polar magnetic field was investigated. High density plasmas of the order of $3.18{\times}10^{11}\;cm^{-3}$ could be obtained with a pressure of 15 mTorr Ar at an inductive power of 5000 W with good plasma stability. This plasma density is higher than that obtained for the conventional double comb-type antenna, possibly due to the plasma confinement, low rf voltage, resulting in high power transfer efficiency. Also, due to the remarkable reduction in the antenna rf voltage and length, a plasma uniformity of less than 3% could be obtained within a substrate area of $880\;mm{\times}660\;mm$ as rf power increased.

• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.9 s.186
• /
• pp.179-189
• /
• 2006

Recently the electrostatic 2-axis MEMS stages have been fabricated f3r the purpose of an application to PSD (Probe-based Storage Device). However, all of the components (platform, comb electrodes, springs, anchors, etc.) in those stages are placed in-plane so that they have low areal efficiencies such as a few percentage, which is undesirable as data storage devices. In this paper, we present a novel structure of an electrostatic 2-axis MEMS stage that is characterized by having a large areal efficiency of about 25%. For obtaining large area efficiency, the actuator part consisting of mainly comb electrodes and springs is placed right below the platform. The structure and operational principle of the MEMS stage are described, followed by a design and analysis, the fabrication and measurement results. Experimental results show that the driving ranges of the fabricated stage along the x and y axis were 27$\mu$m, 38$\mu$m at the supplied voltages of 65V, 70V, respectively and the natural frequencies along x and y axis were 180Hz, 310Hz, respectively. The total size of the stage is about 5.9$\times$6.8mm$^2$ and the platform size is about 2.7$\times$3.6mm$^2$.

• Ocean and Polar Research
• /
• v.38 no.1
• /
• pp.21-33
• /
• 2016

Gametogenesis of the comb pen shell, Atrina pectinata (Linnaeus, 1767) (Bivalvia: Pinnidae) on the southern coast of Ulleungdo Island, Korea was assessed monthly (November 2013 to October 2014) using histology. Gametogenesis commenced in January when the surface water temperature was $12.6^{\circ}C$ and pen shells evidenced an early development phase with small oogonia from January to April, although few females exhibited ripe eggs in their follicular epithelium. In April, the oocyte diameter increased rapidly, and fully mature eggs appeared in May. First spawning males and females were observed in June as the surface water temperature reached $19.3^{\circ}C$ and July ($23.2^{\circ}C$) respectively. The spawning activity continued until the end of September. Histology indicated that the spawning peak of the females in Ulleungdo Island was July to August. During October to January, most of the pen shells were in spent and resting stages. Our data suggested that A. pectinata is a summer spawner, and their annual gametogenesis is closely associated with the seasonal variation in the surface water temperature. The present study is the first provided fundamental information on the life history of A. pectinata in Ulleungdo Island, and this can be put to good use in the management of this pen shell in the study area.