• Proceedings of the KSME Conference
• /
• 2008.11b
• /
• pp.2171-2174
• /
• 2008

The design of thermal radiation shield cooled by a cryocooler is presented. This study is motivated mainly by our recent development of prototype superconducting magnet system for the Cyclotron K120. The superconducting magnet system is composed of the magnet cryostat, transfer line and supply cryostat. In order to minimize thermal radiation load, the superconducting coil form in the magnet cryostat is enclosed by the thermal radiation shield which is thermally connected to the first-stage cold head of a two-stage cryocooler in the supply cryostat. Since the supply cryostat is located far from the magnet cryostat large temperature gradient along the thermal shield is unavoidable. In this paper, the thermal radiation shield is optimized to minimize temperature gradient with taking into account the cryogenic load, system structure and electrical load. The effect of heat source from thermal conduction through mechanical supports on the temperature distribution of thermal radiation shield is also discussed.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.10
• /
• pp.57-62
• /
• 2009

This study proposes the optimization and numerical analysis of the antenna circuit for antenna design with 13.56 MHz as transmitting wireless power, for calculating the dose radiation exposure to the real time. The 13.56 MHz of the antenna frequency bands is used to the loop antenna which is a induced current for transmitting the power with wireless the reader to the tag. The study compared to the real measurement value as calculating the value of the inductance and capacitance through the numerical analysis for the antenna LC resonance using the theory of the electromagnetic induction method. We tried to search for the resonance point as the voltages of both sides of antenna coil by the scope measures of the peak point, as we tried to be variable the resonance capacitor for the optimization tuning of the antenna circuit and the matching of the antenna port. We convince our research contributes to help the design and application technology of the wireless power transmit system which is received power supply with wireless.

• Journal of Mechanical Science and Technology
• /
• v.16 no.8
• /
• pp.1089-1094
• /
• 2002

Mobile communication industry powered by electronics and information technology is building a transforming way for human communication. The latest electronics is so saturated to forget the difficulty in size reduction of electronic parts. However, mechanical parts, such as dynamic speakers and vibration motors, are intrinsically not easy to realize size reduction due to their construction. In this paper, a hexahedral type with simpler configuration is introduced to substitute for the conventional vibration motors. For uneven magnetic field analysis of the hexahedral type, FEM was used to determine magnetic flux density. After an analysis of magnetic and mechanical characteristics, it is shown that the coil configuration is the most important parameter to increase the output torque, and thus vibration. For optimization, genetic algorithm is used to find the optimal configuration of coil to maximize the output torque. Experimental results are also followed to confirm the validity of the proposed design.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.1
• /
• pp.162-169
• /
• 2014

The analysis and comparation of the half-coiled short-pitch windings with different phase belt are presented in the paper. The half-coiled short-pitch windings can supply the odd and even harmonics simultaneously, which can be applied in multiphase bearingless motor (MBLM). The space harmonic distribution of the half-coiled short-pitch windings with two kinds of phase belt is studied wi th respect to different coil pitch, and the suitable coil pitch can be selected from the analysis results to reduce the additional radial force and torque pulse. The two kinds of half-coiled short-pitch windings are applied to the five- and six-phase bearingless motor, and the comparation from the Finite Element Method (FEM) results shows that the winding with $2{\pi}/m$ phase belt is fit for the five phase bearingless motor and the winding with ${\pi}/m$ phase belt is suitable for the six phase bearingless motor. Finally, a five phase surface-mounted permanent magnet (PM) bearingless motor is built and the experimental results are presented to verify the validity and feasibility of the analysis. The results presented in this paper will give useful guidelines for design optimization of the MBLM.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.50 no.12
• /
• pp.587-591
• /
• 2001

This paper describes the general and efficient design method of an axial and a radial shim coils to correct field impurities of various harmonic orders in the imaging volume of Magnetic Resonance Imaging magnet. Shim coils are optimized by BCLSF subroutine of IMSL, which is the well-known commercial package for optimization, aiming at maximizing the magnitude of the desired field component as well as minimizing other field components. In order to evaluate their effect, the developed method was applied to the MRI magnet constructed in KERI.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.11a
• /
• pp.214-219
• /
• 2003

Recently, the optical disk drive that is thin in thickness has been demanded by the popularization of notebook PC. The device that controls the thickness of a drive is the height of optical pickup. Therefore, researches about this are going on and an asymmetric actuator is the good choice fur this target. However, the actuator of this design has troubles that a subsidiary resonance is likely to be actuated by discord between the center of force and the mass of renter. In this paper, relation between the tracking coil and the subsidiary resonance is analyzed and dynamic characteristics of an actuator are improved by using experiments design and response surface method.

• Proceedings of the KIEE Conference
• /
• 1999.07a
• /
• pp.145-147
• /
• 1999

A voice type Moving Coil Linear Oscillatory Actuator(MC-LOA) has unbalanced magnetic circuit structure. Its asymmetric magnetic flux distribution along the mover directions causes shifting of displacement center to one side. Therefore, this paper analyzes both thrust and displacement characteristics and settles the unbalanced flux problem by performing shape optimization. The propriety of the improved design model has been verified by dynamic analysis based on the coupling of kinetic and electric equations.

• Journal of the Korean Magnetics Society
• /
• v.23 no.3
• /
• pp.110-116
• /
• 2013

This paper proposes a sampling-based sensitivity method for dealing with electromagnetic coupled design problems effectively. The black-box modeling technique is basically applied to obtain an optimum regardless of how strong the electromagnetic, thermal and structural analyses are coupled with each other. To achieve this, Kriging surrogate models are produced in a hyper-cubic local window with the center of a current design point. Then design sensitivity values are extracted from the differentiation of basis functions which consist of the models. The proposed method falls under a hybrid optimization method which takes advantages of the sampling-based and the sensitivity-based methods. Owing to the aforementioned feature, the method can be applied even to electromagnetic problems of which the material properties are strongly coupled with thermal or structural outputs. To examine the accuracy and validity of the proposed method, a strongly nonlinear mathematical example and a coil design problem for local induction heating are tested.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.11 no.4
• /
• pp.23-28
• /
• 1974

One of the consistent nuisances in accurate design of circuits containing coils with core is how to take into account the frequency dependence of Q of actual coils. The conventional equivalent circuit consisting of an inductance and a series (constant) resistance and possibly a parallel (constant) capacitance is of little use in this situation since the core loss itself is strongly dependent on the frequency. In order to circumvent this difficulty, in this paper, a mathematical expression for Q of a given core as a function of inductance and frequency is first assumed and parameters in this expression are optimiged so as to best fit the data provided by the core manufacturer or obtained experimentally. This expression is then utilized in accurate calculation of the frequency response of a given circuit required in the optimal design of circuits containing coils. In other words the proposed approach is an effective combination of an approximate expression of coil's Q and circuit optimisation technique, which seems to have solved, to a great extent, the stated difficulty associated with actual coils. As for the optimization technique, ths Fletcher-Powell procedure was employed and one example was given to illustrate the proposed approach.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.5 no.2
• /
• pp.36-41
• /
• 2006

This study was carried out to install the lifting force of a two hinge type stand mechanism by 6 Sigma process in advance. This unit is designed for the display device in order to enhance the ergonomics for effective height adjustment and maintenance at any preferred position. The unit will be very useful for the mechanism fabricated with coil springs and disc springs as a torque generator. The 6 Sigma process was applied to select two key factors among 7 elements to lift the head unit and to find out applicable tolerance securing the 3.4 ppm of defects as well as what deviation of lifting force we can expect between calculation and experiment at the design stage of development. The result of this study can be applied to various units for the optimization of the smooth lift.