• 제목/요약/키워드: Coherence Bandwidth

검색결과 54건 처리시간 0.029초

UMM(Unitary Matrix Modulation)을 이용한 LDPC(Low Density Parity Check) 코디드 OFDM 시스템 (Low Density Parity Check (LDPC) Coded OFDM System Using Unitary Matrix Modulation (UMM))

  • 김남수;강환만;조성호
    • 한국통신학회논문지
    • /
    • 제30권5A
    • /
    • pp.436-444
    • /
    • 2005
  • 다중 안테나 시스템에서 UMM (unitary matrix modulation)을 사용한 방법을 USTM (unitary space-time modulation)이라 부른다. OFDM 시스템에서 coherence bandwidth 만큼의 이격을 두고 UMM의 대각 행렬을 이용한 방법이 제안되고 있다. 또한 최근에 디코딩 방법이 간단하고 좋은 성능을 갖는 LDPC (low density parity check) 코드에 대한 연구가 진행되고 있다. 본 논문에서 UMM (unitary matrix modulation)을 사용하고 LDPC 코디드 된 OFDM 시스템을 제안한다. 또한 다중 송신 안테나를 사용하여 송신 diversity 이득을 얻는 것이 아니라, 하나의 송신 안테나를 이용하여 채널의 coherence bandwidth 만큼의 주파수 간격 (splitting)을 두어 채널에 대한 주파수 이득을 고려하여 UMM/OFDM 시스템을 설계 하였다. 이 방법을 이용하여 본 논문에서 제안된 UMM-S/OFDM에 대한 성능 특성을 다중 경로 Rayleigh 페이딩 채널 환경에서 시뮬레이션을 통하여 검증하였다.

광자결정 광섬유기반 광신호 분배기 개발 (Development of a Ultra Broadband Optical Coupler Based on a Photonic Crsytal Fiber)

  • 윤민석;이상배;한영근
    • 한국광학회지
    • /
    • 제21권5호
    • /
    • pp.195-199
    • /
    • 2010
  • 본 논문에서는 광자결정 광섬유를 이용하여 1000 nm 의 광대역폭을 갖는 광신호 분배기를 구현하였다. 제작에 사용된 광자결정 광섬유의 지름은 $130{\mu}m$ 이고 6층의 공기 구멍 구조로 이루어져 있다. 광신호 분배기는 두 가닥의 광자결정 광섬유에 열을 가함과 동시에 인장력을 가해 제작하였으며 제작된 광자결정 광섬유 기반 광신호 분배기의 지름은 $23{\mu}m$ 이었다. 광신호 분배기의 제작 시 인장시키는 길이에 따라 대역폭과 bandedge가 조절되었다. 제작된 광자결정 광섬유 기반 광신호 분배기의 대역폭이 1000 nm에서 50:50의 광신호 분해 효율을 가지는 것으로 측정되었다. 광자결정 광섬유의 공기 구멍 구조의 특성으로 인해 주변온도의 변화에 영향을 받지 않는 특성을 나타낸다. Optical coherence tomography의 분해능이 광원의 대역폭에 비례하므로 광대역폭을 갖는 광자결정 광섬유 기반 광신호 분배기는 신호 추출을 위한 간섭계 구성에 핵심적으로 활용될 수 있을 것으로 사료된다.

수중 다중경로 채널에서 수면변동에 의한 지연확산이 텍스트 전송성능에 미치는 영향 (Effect of Text Transmission Performance on Delay Spread by Water Surface Fluctuation in Underwater Multipath Channel)

  • 박지현;김종욱;윤종락
    • 대한전자공학회논문지TC
    • /
    • 제48권1호
    • /
    • pp.1-8
    • /
    • 2011
  • 본 논문에서는 수조 실험을 통해 수중 다중경로 채널의 수면변동과 지연확산이 텍스트 전송성능에 미치는 영향 확인하였다. 수면변동과 지연확산은 채널의 코히어런스 대역폭을 제한하는 요인으로 수중음향 통신의 전송성능을 제한한다. 잔잔한 수면과 교란하는 수면에 따른 응답특성 실험결과에서 수면 반사파의 진폭변동과 지연확산 특성을 확인하였다. 각각의 지연확산 유효치는 각각 5ms, 4ms로 그에 대응하는 코히어런스 대역폭은 200Hz, 250Hz였다. BFSK (Binary Frequency Shift Keying) 방식을 이용한 수중 텍스트 전송성능에서 지연확산에 따른 채널의 코히어런스 대역폭 제한으로 인해 잔잔한 수면인 경우 200bps이하에서 $10^{-4}$, 교란하는 수면인 경우 250bps 이하에서 $10^{-4}$으로 오류율이 나타났다. 따라서 본 실험을 통해 수중 다중경로 채널에서 수면변동에 의한 코히어런스 대역폭 제한용 수중음향 통신의 전송성능을 결정하는 중요한 요인임을 확인하였다.

계층버스 다중처리기에서 캐시 일관성 프로토콜의 민감도 분석 (Sensitivity Analysis of Cache Coherence Protocol for Hierarchical-Bus Multiprocessor)

  • 이흥재;최진규;기장근;이규호
    • 전기전자학회논문지
    • /
    • 제8권2호
    • /
    • pp.207-215
    • /
    • 2004
  • 계층버스 다중처리기 시스템에서 캐시 일관성 프로토콜은 시스템 성능에 영향을 준다. 특정 캐시 일관성 프로토콜 하에서 시스템의 성능은 버스의 대역폭 및 메모리크기, 메모리 블록의 크기에 따라 영향을 받는다. 따라서 시스템 성능에 영향을 미치는 요소들에 대한 민감도 분석이 필요하다. 본 논문에서는 계층버스 다중처리기에 캐시 일관성 프로토콜을 적용하고, 프로토콜에서 정의된 상태가 나타날 확률을 구하였다. 구해진 확률값을 분석적 모델에 적용하여 시뮬레이션을 하였다. 그리고 시뮬레이션 결과를 기반으로 시스템의 성능에 영향을 미치는 요소에 대한 민감도 분석을 하였다.

  • PDF

송수신기가 고정된 천해 수중음향통신 채널 매개변수 해석 (Analysis of a fixed source-to-receiver underwater acoustic communication channel parameters in shallow water)

  • 배민자;박지현;윤종락
    • 한국음향학회지
    • /
    • 제38권5호
    • /
    • pp.494-510
    • /
    • 2019
  • 수중음향통신시스템의 모뎀이나 채널 코딩 설계를 위한 채널 매개변수는 임펄스 응답, 지연 확산, 산란함수, 도플러 확산, 상관 대역폭, 주파수 선택적 페이딩, 상관 시간 및 시변 진폭 페이딩의 통계적 분포 함수 등이다. 이들 매개 변수들은 주어진 해양 음향 조건에서 수층의 음속 구조, 플렛폼의 운동이나 해면의 거칠기에 영향을 받는다. 본 논문에서는 송수신기 고정 천해 수중음향통신 채널에 대한 페이저 기반의 채널 모델과 모의실험 및 채널 매개변수들의 측정과 분석 방법을 제시하고 천해의 실험 자료를 이용하여 이들 매개변수들을 해석하였다. 송수신기 거리가 300 m와 600 m에 대한 이들 매개 변수들은 직접파, 산란 성분을 갖는 해면 반사파 및 해저 반사파로 구성되는 3개 다중 경로에 의해 그 특징이 결정됨을 보인다. 연구의 결과는 천해 고정 시스템의 채널 모델 방법, 채널 매개변수들의 측정과 분석 방법 및 시스템 설계와 성능평가 방법을 제시한다.

Partial Spectrum Detection and Super-Gaussian Window Function for Ultrahigh-resolution Spectral-domain Optical Coherence Tomography with a Linear-k Spectrometer

  • Hyun-Ji, Lee;Sang-Won, Lee
    • Current Optics and Photonics
    • /
    • 제7권1호
    • /
    • pp.73-82
    • /
    • 2023
  • In this study, we demonstrate ultrahigh-resolution spectral-domain optical coherence tomography with a 200-kHz line rate using a superluminescent diode with a -3-dB bandwidth of 100 nm at 849 nm. To increase the line rate, a subset of the total number of camera pixels is used. In addition, a partial-spectrum detection method is used to obtain OCT images within an imaging depth of 2.1 mm while maintaining ultrahigh axial resolution. The partially detected spectrum has a flat-topped intensity profile, and side lobes occur after fast Fourier transformation. Consequently, we propose and apply the super-Gaussian window function as a new window function, to reduce the side lobes and obtain a result that is close to that of the axial-resolution condition with no window function applied. Upon application of the super-Gaussian window function, the result is close to the ultrahigh axial resolution of 4.2 ㎛ in air, corresponding to 3.1 ㎛ in tissue (n = 1.35).

Measurements and Analysis of Fingerprinting Structures for WLAN Localization Systems

  • Al KhanbashI, Nuha;Al Sindi, Nayef;Ali, Nazar;Al-Araji, Saleh
    • ETRI Journal
    • /
    • 제38권4호
    • /
    • pp.634-644
    • /
    • 2016
  • Channel-based radio-frequency fingerprinting such as a channel impulse response (CIR), channel transfer function (CTF), and frequency coherence function (FCF) have been recently proposed to improve the accuracy at the physical layer; however, their empirical performance, advantages, and limitations have not been well reported. This paper provides a comprehensive empirical performance evaluation of RF location fingerprinting, focusing on a comparison of received-signal strength, CIR-, CTF-, and FCF-based fingerprinting using the weighted k-nearest neighbor pattern recognition technique. Frequency domain channel measurements in the IEEE 802.11 band taken on a university campus were used to evaluate the accuracy of the fingerprinting types and their robustness to human-induced motion perturbations of the channel. The localization performance was analyzed, and the results are described using the spatial and temporal radio propagation characteristics. In particular, we introduce the coherence region to explain the spatial properties and investigate the impact of the Doppler spread in time-varying channels on the time coherence of RF fingerprint structures.

10kHz 반송파를 사용한 서해안 수중 채널환경 분석 (Underwater Channel Environment Analysis Using 10Khz Carrier Frequency at the Shore of West Sea)

  • 김민상;고학림;김계원;이태석;임태호
    • 한국통신학회논문지
    • /
    • 제41권1호
    • /
    • pp.132-139
    • /
    • 2016
  • 본 연구는 10kHz의 반송 주파수를 사용하여 서해안의 수중 채널 환경 측정과 분석을 목표로 하여 충청남도 당진군 장고항 인근 해역에서 측정을 수행하였으며, 수평채널 환경을 측정하기 위해 송신기와 수신기 사이의 이격거리를 10m~4000m까지 다르게 하였고, 수직 채널 측정은 송신측 선박과 수신측 선박을 접선시켜 고정한 후 송신기와 수신기의 입수 깊이를 다르게 하여 측정을 수행하였다. 측정 데이터를 바탕으로 실해역의 전력 지연 프로파일(Power delay profile)을 분석 하여 상관대역폭(Coherence bandwidth)을 추정하였으며, 수신된 tone신호의 주파수 변환을 통한 도플러 주파수를 분석하여 상관시간(Coherence time)을 추정 하였다. 따라서 본 연구는 향후 수중 채널 환경에서 원활한 통신과 통신의 신뢰성 확보를 위한 수중통신용 프레임 설계 연구를 수행하는 기반연구가 될 것으로 기대된다.

Jammer Identification: Spectral Correlation Function and Wavelet Coherence

  • Jin, Mi Hyun;Choi, Yun Sub;Choi, Heon Ho;Lee, Sang Jeong
    • Journal of Positioning, Navigation, and Timing
    • /
    • 제7권3호
    • /
    • pp.147-153
    • /
    • 2018
  • Jamming countermeasures are used to decrease or prevent the impact of intentional jamming applied to degrade the quality of information provided by a global navigation satellite system (GNSS) receiver. The maximum performance of jamming countermeasure can be obtained only when a proper technique is applied according to the type of jammer. This paper suggests a jamming identification technique for providing information regarding the type of jamming. The center frequency and bandwidth of jammer signal are inconsistent and may change according to time, and thus a spectral correlation function and wavelet coherence were considered in order to analyze the signal in the time and frequency space. Because the two characteristics derive different analysis results, two different identification techniques were suggested and the performances thereof were analyzed. Numerical results show that the two identification techniques have relative advantages and disadvantages as to time consumed and performance. The suggested methods can sufficiently identify the jammer before the GNSS receiver becomes inoperable because of jamming.