• 한국수소및신에너지학회논문집
• /
• 제14권3호
• /
• pp.268-275
• /
• 2003

The water-splitting process by the metal oxides using solar heat is one of the hydrogen production method. The hydrogen production process using the metal oxides (NiFe2O4/NiAl2O4,CoFe2O4/CoAl2O4, CoMnNiFerrite, CoMnSnFerrite, CoMnZnFerrite, CoSnZnFerrite) was carried out by two steps. The first step was carried out by the CH4-reduction to increase activation of metal oxides at operation temperature. And then, it was carried out the water-splitting reaction using the water at operation temperature for the second step. Hydrogen was produced in this step. The production rates of H2 were 110, 160, 72, 29, 17, $21m{\ell}/hr{\cdot}g-_{Metal\;Oxide}$ for NiFe2O4/NiAl2O4, CoFe2O4/CoAl2O4, CoMnNiFerrite, CoMnSnFerrite, CoMnZnFerrite, CoSnZnFerrite respectively in the second step. CoFe2O4/CoAl2O4 had higher H2 production rate than the other metal oxides.

• Biomolecules & Therapeutics
• /
• 제29권3호
• /
• pp.273-281
• /
• 2021

Severe acute respiratory syndrome CoV-2 (SARS-CoV-2) is responsible for the current coronavirus disease 2019 (COVID-19) pandemic. Signaling pathways that are essential for virus production have potential as therapeutic targets against COVID-19. In this study, we investigated cellular responses in two cell lines, Vero and Calu-3, upon SARS-CoV-2 infection and evaluated the effects of pathway-specific inhibitors on virus production. SARS-CoV-2 infection induced dephosphorylation of STAT1 and STAT3, high virus production, and apoptosis in Vero cells. However, in Calu-3 cells, SARS-CoV-2 infection induced long-lasting phosphorylation of STAT1 and STAT3, low virus production, and no prominent apoptosis. Inhibitors that target STAT3 phosphorylation and dimerization reduced SARS-CoV-2 production in Calu-3 cells, but not in Vero cells. These results suggest a necessity to evaluate cellular consequences upon SARS-CoV-2 infection using various model cell lines to find out more appropriate cells recapitulating relevant responses to SARS-CoV-2 infection in vitro.

• Archives of Pharmacal Research
• /
• 제23권4호
• /
• pp.332-337
• /
• 2000

This study describes the synthesis, in vitro evaluation and molecular modeling study of novel compounds for the inhibition of TNF-$\alpha$production, Among these compounds, 2-[3-(cyclopentyloxy)-4-methoxyphenyl]-1-isoindolinone (9) was selected as a lead compound and its pyridine derivative 10 was more potent in activity and safer than rolipram.

• Journal of Microbiology and Biotechnology
• /
• 제20권2호
• /
• pp.346-349
• /
• 2010

Coenzyme $Q_{10}$ ($CoQ_{10}$) production from Rhizobium radiobacter T6102 was monitored under various oxygen supply conditions by controlling the agitation speeds, aeration rates, and dissolved oxygen levels. As the results, the $CoQ_{10}$ production was enhanced by limited oxygen supply. To investigate whether the $CoQ_{10}$ production is associated with its physiological functions of electron carrier and antioxidant, the effects of sodium azide and hydrogen peroxide on the $CoQ_{10}$ production were studied, showing that the $CoQ_{10}$ contents were slightly enhanced with increasing sodium azide (up to 0.4 mM) and hydrogen peroxide (up to $10\;{\mu}M$) concentrations. These results suggest the plausible mechanism where the limited electron transfer stimulating the environments of limited oxygen supply and oxidative stress could accumulate the $CoQ_{10}$, providing the relationship between the $CoQ_{10}$ physiological functions and its regulation system.

• 콘크리트학회논문집
• /
• 제22권6호
• /
• pp.787-796
• /
• 2010

전 세계적으로 지구 온난화의 주요원인인 $CO_2$ 발생에 대한 규제가 강화되고 있다. 반 환경산업으로 인식되는 건설 산업의 주요자재로서 다량의 $CO_2$를 배출하는 콘크리트는 생산과정에서 발생된 $CO_2$ 배출량 감소에 대한 필요성이 인식되었다. 이 논문에서는 콘크리트를 기초로 하여 자재생산, 운송, 제조단계에서 발생하는 $CO_2$ 배출량을 평가하기 위한 시스템을 구축하고, $CO_2$ 배출량을 효율적으로 저감하고 평가하기 위한 프로그램을 개발 하였다. 평가결과, 대부분의 $CO_2$ 배출량은 자재생산단계에서 발생했으며, 자재, 운송, 제조단계에서 배출된 $CO_2$ 배출량에 대하여 정량적으로 평가하였다. 더욱이, $CO_2$ 배출량을 저감하기 위하여 각 단계별로 친환경 기술을 적용하여 평가가 가능한 이 평가시스템은 콘크리트 생산에 따른 $CO_2$ 배출량을 정량적으로 평가하기 위한 시스템으로 제안할 수 있으며, 국내 레미콘생산업체는 $CO_2$ 배출량 평가를 하기 위해 이 시스템을 사용할 수 있다.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2022년도 추계학술대회
• /
• pp.169-169
• /
• 2022

Over the past 100 years, the global average temperature has risen by 0.75 ℃. The Korean Peninsula has risen by 1.8 ℃, more than twice the global average. According to the RCP 8.5 scenario, the CO₂ concentration in 2100 will be 940 ppm, about twice as high as current. The National Institute of Crop Science(NICS) is using the SPAR (Soil-Plant Atmosphere Research) facility that can precisely control the environment, such as temperature, humidity, and CO₂. A Python-based colony photosynthesis algorithm has been developed, and the carbon and nitrogen absorption rate of rice is evaluated by setting climate change conditions. In this experiment, Oryza Sativa cv. Shindongjin were planted at the SPAR facility on June 10 and cultivated according to the standard cultivation method. The temperature and CO₂ settings are high temperature and high CO₂ (current temperature+4.7℃ temperature+4.7℃·CO₂ 800ppm), high temperature single condition (current temperature+4.7℃·CO₂ 400ppm) according to the RCP8.5 scenario, Current climate is set as (current temperature·CO₂400ppm). For colony photosynthesis measurement, a LI-820 CO₂ sensor was installed in each chamber for setting the CO₂ concentration and for measuring photosynthesis, respectively. The colony photosynthetic rate in the booting stage was greatest in a high temperature and CO₂ environment, and the higher the nitrogen fertilization level, the higher the colony photosynthetic rate tends to be. The amount of photosynthesis tended to decrease under high temperature. In the high temperature and high CO₂ environment, seed yields, the number of an ear, and 1000 seed weights tended to decrease compared to the current climate. The number of an ear also decreased under the high temperature. But yield tended to increase a little bit under the high temperature and high CO₂ condition than under the high temperature. In addition, In addition to this study, it seems necessary to comprehensively consider the relationship between colony photosynthetic ability, metabolite reaction, and rice yield according to climate change.

• 산업공학
• /
• 제16권3호
• /
• pp.352-361
• /
• 2003

Vehicle manufacturing plant is a typical mixed-model production system. Generally it consists of three main shops including body shop, painting shop and assembly shop in addition to engine shop. Each shop contains diverse manufacturing processes, all of which are integrated in a form of flow line. Due to the high pressure from the market requesting small-volume large variety production, production planning becomes very critical for the competitiveness of automotive industry. In order to save costs and production time, production planning system is requested to meet some designated requirements for each shop: to balance the work load in body and assembly shops, and to minimize the number of color changes in painting shop. In this context, we developed a sequencing module for a vehicle production planning system using the ILOG Solver Library. It is designed to take into account all the manufacturing constraints at a time with meeting hard constraints in body shop, minimizing the number of soft constraints violated in assembly shop, and minimizing the number of color changes in painting shop.

• Natural Product Sciences
• /
• 제5권2호
• /
• pp.70-74
• /
• 1999

In the course of a search for tumor necrosis factor $(TNF)-{\alpha}$ inhibitory compounds from medicinal plants, we identified neolignans, honokiol and magnolol, from the alcoholic extract of Magnolia offcinalis as active inhibitory principles. These compounds dose-dependently inhibited $TNF-{\alpha}$ production without displaying cytotoxicity and their inhibitory activities measured by $IC_{50}$ values were 53.7 and $61.4\;{\mu}M$, respectively.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 A
• /
• pp.281-284
• /
• 1996

Samsung Electronics has developed high performance velocity and position controllers for induction motors, and succeeded in mass production for the first time in Korea. Dynamic performance and final control accuracy of the controller are equivalent to those of AC servo motor controller. At present, we adopted the controller as spindle motor drive for Samsung CNC systems, and expect its wide use in industry as general purpose velocity and position controller for induction motor.

• Journal of Microbiology and Biotechnology
• /
• 제18권1호
• /
• pp.135-137
• /
• 2008

The metabolic engineering of epothilones, as secondary metabolites, was investigated using Sorangium cellulosum to achieve the selective production of epothilone B, a potent anticancer agent. Thus, the propionyl-CoA synthetase gene (prpE) from Ralstonia solanacearum was heterologously expressed in S. cellulosum to increase the production of epothilone B. Propionyl-CoA synthetase converts propionate into propionyl-CoA, a potent precursor of epothilone B. The recombinant S. celluloslim containing the prpE gene exhibited a significant increase in the resolution of epothilones B/A, with an epothilone B to A ratio of 127 to 1, which was 100 times higher than that of the wild-type cells, demonstrating its potential use for the selective production of epothilone B.