• 벤처창업연구
• /
• 제10권6호
• /
• pp.253-260
• /
• 2015

본 연구에서는 화재 시뮬레이션인 FDS와 피난 시뮬레이션인 Pathfinder를 이용하여 건물의 중앙제어실을 화재발생 지점으로 설정하여 화재안전성 평가 연구를 수행하였다. 먼저 화재시뮬레이션을 이용하여 시간의 경과에 따른 가시거리 분포, 온도분포, CO의 농도분포 등의 정량적 결과를 도출 하였으며, 이 결과를 토대로 피난시뮬레이션을 실시하여 재실자들의 피난시간을 계산함으로써 최종적인 피난안전성 평가 결과를 도출하였다. 화재 시뮬레이션 결과 가시거리의 분포에 따라 위험도가 증가하기 때문에 이 값을 이용하여 피난시뮬레이션을 실시하였으며 그 결과 최종적으로 127.9초에 모든 인원이 대피하는 결과를 얻을 수 있었다. 수치해석 결과 건물 내 모든 장소에서 피난 소요시간이 피난 허용시간을 초과하지 않는 것으로 분석됨에 따라 대피자의 안전성이 확보되는 것으로 분석되었다. 이러한 안전성 평가의 결과는 최악의 조건인 소방설비의 미작동에 근거한 종합안전성평가로서 실제 화재 발생 시 소방설비와 연계한다면 보다 우수한 피난안전성능이 확보될 것으로 평가할 수 있다.

• 한국화재소방학회논문지
• /
• 제14권3호
• /
• pp.6-12
• /
• 2000

본 연구는 두 가지 유형의 3차원 실내 공간 내에서 화재 발생시 연기거동에 미치는 복사영향을 알아보기 위해 자체개발한 SMEP(Smoke Movement Estimating Program) Seld 모델을 사용하여 수치해석하였다. PISO 알고리즘과 부력항을 포함한 수정 k - e 난류모델을 사용한 SMEP은 연속, 운동, 에너지, 농도 그리고 복사 열 전달 방정식을 풀었으며, 복사 열 전달 방정식의 해석을 위하여 S-N 구분종좌표법을 채택하여 사용하였다. 수치해석 결과 연기의 온도분포는 복사를 고려하지 않고 대류만을 고려했을 경우 실험치와 많은 오차를 보였으나 복사를 함께 고려했을 경우는 실험치와 작은 오차범위로 비슷한 경향을 나타내었다. 이것은 연기속에 포함되어 있는 연소생성물 중 H2O와 CO2 가스의 복사 영향 때문이며, 따라서 좀더 실제적인 화재해석에 있어서 복사는 반드시 고려되어야만 한다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2017년도 춘계 학술논문 발표대회
• /
• pp.50-51
• /
• 2017

The Urban-type building is an building that it relaxed the construction standard and subsidiary facility standard. The most of the urban-type buildings are pilotis, the main case of representing these building's fire risk is the Uijeongbu fire this study investigated to piloti urban type housing risk on the basis of Uijeongbu fire, and we checked structural problem that unable to escape from the rooftop inside the piloti. also, there was confirmed limit to the evacuation of the occupants because the smoke was rapidly transferred to the top layer through inside the electric duct. and when we analyzed smoke flow use of Fire simulation, it was confirmed Available Safety Egress Time that is four minutes of CO.

• 한국화재소방학회:학술대회논문집
• /
• 한국화재소방학회 2012년도 춘계학술발표회 초록집
• /
• pp.147-150
• /
• 2012

This study restoration worker for dispersion relay in R-Type fire alarm system. Restoration worker very good instrument for an fire system inspector. When inspector check for fire system someone need reset for fir system to normal state. This chain of action is frequent and troublesome. In this case, If we can automatic reset for fire system it's restoration worker. This paper settlement on the problem for reset fire system. Design, make grabber for restoration worker. The test offer proof possibility restoration worker.

• 한국전기전자재료학회논문지
• /
• 제17권11호
• /
• pp.1205-1211
• /
• 2004

This study has investigated radiation degradation of chloroprene rubber in the presence of some fire retardant. Ammonium polyphosphate, aluminium trihydroxide, magnesium hydroxide, calcium carbonate and antimony trioxide were selected as flame retardant. Samples were irradiated using a Co$^{60}$ ${\gamma}$ -ray and ray up to 2000 kGy at a dose rate of 5 kGy/hr in the presence of air atmosphere at room temperature. After irradiation, samples were assessed fire retardancy with electrical properties and mechanical properties. Some considerations concerning the effects of the fire retardants added to chloroprene rubber on the radiation and thermal stability of chloroprene rubber are presented. From fire retardancy with electrical and mechanical property measurements, it was found that addition of magnesium hydroxide resulted in maximum fire retardant effect.

• Architectural research
• /
• 제24권2호
• /
• pp.21-27
• /
• 2022

For the past decade, South Korea had experienced catastrophic building fires, which resulted in consider-ably high number of casualties. This motivated research to develop fire-safe wall assemblies. In this study Fire Risk Analysis (FRA) is conducted as part of the project designing phase to ensure fire safety of the final product. Traditional approach was to consider fire performance at the end of the designing stage, when PASS/FAIL fire test results are required to be submitted to the Authority Having Jurisdiction (AHJ). By applying a fire risk analysis to guide the designing phase, overall fire safety of a wall assembly can be achieved more systematically as conducting FRA allows designers to clearly identify elements that are more vulnerable to fire and simply replace them with other practical options. Severity of fire risk is determined by considering the fire hazards of a wall assembly such as the exterior layer, insulation, vertical connectivity, and external ignition sources (e.g., photovoltaic panels). Frequency of fire risk is assessed based on the factors affecting fire likelihood, which are air cavity and fire-stopping applied in the design, and random design changes occurring during on-site construction. Fire risk matrix is proposed based on these fire risk factors and efforts to reduce the fire risk level associated with the wall assembly are given by systematically assessing the fire risk factors identified from fire risk analysis. Current study demonstrates how fire risk analysis can be applied to develop fire-safe walls by reducing the relevant fire risks- both severity and frequency.

• 한국화재소방학회논문지
• /
• 제29권6호
• /
• pp.57-64
• /
• 2015

육상 및 해상에서 일어나는 화재를 진압하기 위한 가스계 소화설비 중 이산화탄소 소화설비는 우수한 성능 및 높은 경제성으로 인하여 널리 사용되고 있지만, 고농도 이산화탄소로 인한 질식사고가 빈번히 발생하여 안전문제가 항상 지적되어 왔다. 본 연구에서는 수치해석을 통하여 선박 내 압축기실의 이산화탄소 소화설비 화재 진압 특성을 예측하고, 이산화탄소 소화설비로 인한 질식사고를 방지하기 위한 2중 안전 제어기법을 제시하여, 이산화탄소 소화설비의 안전을 도모하였다. 수치해석 결과로는 4가지 시나리오를 선정하여, 화재발생 후 이산화탄소 소화설비 작동으로 인한 열발생률 변화, 온도변화, 이산화탄소 농도변화, 산소 농도변화 및 화재진압 특성을 고찰하였으며, 방호구역 내 환기팬 용량이 충분하지 않은 경우의 위험성 및 적절한 환기시스템의 필요성을 제시하였다.

• 한국안전학회지
• /
• 제26권5호
• /
• pp.41-45
• /
• 2011

The fire event occurred in fire proof zone often causes serious electrical problems such as shorts, ground faults, or open circuits in nuclear power plants. These would be directed to the loss of safe shutdown capabilities performed by safety related systems and equipments The fire event can treat the basic design principle that safety systems should keep their functions with redundancy and independency. In case of a cable fire, operators can not perform their mission properly and can misjudge the situation because of spurious operation, wrong indication or instrument. These would deteriorate the plant capabilities of safety shutdown and make disastrous conditions. In this paper, the cables of the representative nuclear power plant in korea is selected and the cable functional failure temperature by exposed fire using Cable Response to Live Fire(CAROLFIRE) is studied. It is expected that the results are very useful to know the cable failure temperature by exposed fire. We confirmed the safety and integrity of the cable by exposed fire and those results will use the based data of cable exposed fire characteristics.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 봄 학술논문 발표대회
• /
• pp.53-54
• /
• 2021

Grenfell Tower was renovated in 2014 and 2016 at a high cost to replace the exterior materials, windows and co-heating facilities of the building. The exterior materials used during the repair work were sandwich panels filled with polyethylene and plastic, which were expanded on the aluminum metal surface. It is a product called Celotex RS 5000, a low-resolution but inexpensive repair material, and is currently an external material that cannot be used in high-rise buildings. Similar domestic fire cases began to focus social attention on the safety of high-rise buildings through the Busan Residential Complex Fire (2010), Uijeongbu Urban Living Housing Fire (2015), and Ulsan Residential Complex Fire (2020), and residents' safety concerns are increasing. In Korea, the occurrence and risk of similar fires are high, so setting up fire prevention measures through fire case investigation is considered the most basic measure in securing human safety. Therefore, the purpose of this study is to examine the status of fire damage caused by domestic and foreign eruptions, domestic and international research status and related regulations on external materials and windows starting from the Grenfell Tower fire in England.

• 한국화재소방학회:학술대회논문집
• /
• 한국화재소방학회 2012년도 춘계학술발표회 초록집
• /
• pp.357-360
• /
• 2012

본 연구에서는 기존 급기가압 제연의 성능평가를 수행하였고, 이를 기반으로 급기가압제연댐퍼의 기류방향에 따른 방연풍속 확보가 곤란한 점에 착안하여 무지향성 제연댐퍼시스템을 개발하였다. 개발된 무지향성 제연댐퍼를 대상으로 Mockup 실험을 수행한 결과 화재실 출입문과 제연댐퍼의 설치위치와 상관없이 방연풍속 확보가 가능하여 급기가압제연시스템의 성능개선효과가 매우 큰 것으로 나타났다.