• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.52 no.1
• /
• pp.69-80
• /
• 2007

Among the photoactive semiconductors such as $TiO_2,\;ZnO,\;Fe_2O_3,\;WO_3,\;and\;CdSe,\;TiO_2$ is the most widely used as photocatalyst in different media, because of its lack of toxicity and stability. In this study, the effects of titanium dioxide were investigated to obtain the information of physiological change in rice plant. Light-adapted Chlorophyll flourescence index decreased and relative electron transport rate of rice leaves was activated by titanium dioxide under $2,400\;{\mu}mol\;m^{-2}\;s^{-1}$ PAR (Photosynthetic active radiation). Relative electron transport rate of rice leaf treated with titanium dioxide 10 ppm was high in order of $2,400\;{\mu}mol\;m^{-2}\;s^{-1}\;PAR,\;2,200\;{\mu}mol\;m^{-2}\;s^{-1}\;PAR,\;450\;{\mu}mol\;m^{-2}\;s^{-1}\;PAR$ and titanium dioxide 10 ppm (45.1%), control (32.4%), diuron 10 ppm (15.3%) under $2,400\;{\mu}mol\;m^{-2}\;s^{-1}\;PAR$. Titanium dioxide increased photosynthesis of the rice leaf under $13.6\;KJ\;m^{-2}\;day^{-1}$ UV-B only. With titanium dioxide 20 ppm, reduced UV-B ($0.15\;KJ\;m^{-2}\;day^{-1}$) intensity changed the induction of proteins and twenty-five proteins were identified. Among them, seventy proteins were up-regulated, four proteins were down-regulated and four proteins were newly synthesized. Function of these proteins was related to photosynthesis (52%), carbohydrate metabolism (4%), stress/defense (8%), secondary metabolism (4%), energy/electron transport (4%), and miscellaneous (28%).

• Journal of Life Science
• /
• v.18 no.10
• /
• pp.1377-1383
• /
• 2008

A bacterium producing non- or partially digestible dextran was isolated from kimchi broth by enrichment culture technique. The bacterium was identified tentatively as Leuconostoc sp. strain SKY. We established the response surface methodology (Box-Behnken design) to optimize the principle parameters such as culture pH, temperature, and yeast extract concentration for maximizing production of dextran. The ranges of parameters were determined based on prior screening works done at our laboratory and accordingly chosen as 5.5, 6.5, and 7.5 for pH, 25, 30, and $35^{\circ}C$ for temperature, and 1, 5, and 9 g/l yeast extract. Initial concentration of sucrose was 100 g/l. The mineral medium consisted of 3.0 g $KH_2PO_4$, 0.01 g $FeSO_4{\cdot}H_2O$, 0.01 g $MnSO_4{\cdot}4H_2O$, 0.2 g $MgSO_4{\cdot}7H_2O$, 0.01 g NaCl, and 0.05 g $CaCO_3$ per 1 liter deionized water. The optimum values of pH and temperature, and yeast extract concentration were obtained at pH (around 7.0), temperature (27 to $28^{\circ}C$), and yeast extract (6 to 7 g/l). The best dextran yield was 60% (dextran/g sucrose). The best dextran productivity was 0.8 g/h-l.

• Journal of Aquaculture
• /
• v.19 no.4
• /
• pp.247-253
• /
• 2006

This study was conducted to investigate the effects of dietary supplementation of ${\beta}-1,3$ glucan on growth and immune responses in juvenile olive flounder, Paralichthys olivaceus fed the white fish meal based diets for 6 weeks. Five experimental diets supplemented with ${\beta}-1,3$ glucan at 0, 0.01, 0.025, 0.05, 0.1 % (Control, $G_{0.01},\;G_{0.025},\;G_{0.05}\;and\;G_{0.1}$, respectively) of diet on a dry-matter basis. Five experimental diets were formulated to be isonitrogenous and isocaloric to contain 50.0% crude protein and 16.7 kJ available energy $g^{-1}$. Fish averaging $3.2{\pm}0.1\;g\;(mean{\pm}SD)$ were randomly distributed in each aquarium as triplicate groups of 15 fish. Weight gain (WG, %), specific growth rate (SGR, %), and feed efficiency (FE, %) of fish fed $G_{0.1}$ diet were found significantly higher than those of fish fed Control, $G_{0.01},\;G_{0.025}\;and\;G_{0.05}$ diets (P<0.05). However, there was no significant difference among the fish fed control, $G_{0.01},\;G_{0.025}$. Chemiluminescent responses (CL) of fish fed $G_{0.1}$ diet were significantly higher than those of fish fed the other diets. Serum lysozyme activities of fish fed $G_{0.05}$ and $G_{0.1}$ diets were higher than those of fish fed control, $G_{0.025}$ and $G_{0.05}$ diets. Fish fed $G_{0.1}$ diet showed a significantly lower cumulative mortality than did fish fed control diet throughout the challenge test (P<0.05). These results suggested that based on growth rate, feed efficiency, non-specific immunity and protection against microbial infections the optimum dietary ${\beta}-1,3$ gulcan could be greater than 0.05% but less than 1.0% in juvenile olive flounder, Paralichthys oilvaceus.

• Journal of the Korean Applied Science and Technology
• /
• v.29 no.3
• /
• pp.450-458
• /
• 2012

In order to reduce the effects of greenhouse gas (GHG) emissions, the South Korean government has announced a special platform of technologies as part of an effort to minimize global climate change. To further this effort, the Korean government has pledged to increase low-carbon and carbon neutral resources for biofuel derived from biomass to replace fossil and to decrease levels of carbon dioxide. In general, second generation biofuel produced form woody biomass is expected to be an effective avenue for reducing fossil fuel consumption and greenhouse gas (GHG) emissions in road transport. It is important that under the new Korean initiative, pilot scale studies evolve practices to produce biomass-to-liquid (BTL) fuel. This study reports the quality characteristics of F-T(Fischer-Tropsch) diesel for production of BTL fuel. Synthetic F-Tdiesel fuel can be used in automotive diesel engines, pure or blended with automotive diesel, due to its similar physical properties to diesel. F-T diesel fuel was synthesized by Fischer-Tropsch (F-T) process with syngas($H_2$/CO), Fe basedcatalyst in low temperature condition($240^{\circ}C$). Synthetic F-T diesel with diesel compositions after distillation process is consisted of $C_{12}{\sim}C_{23+}$ mixture as a kerosine, diesel compositions of n-paraffin and iso-paraffin compounds. Synthetic F-T diesel investigated a very high cetane number, low aromatic composition and sulfur free level compared to automotive diesel. Synthetic F-T diesel also show The wear scar of synthetic F-T diesel show poor lubricity due to low content of sulfur and aromatic compounds compared to automotive diesel.

• Microbiology and Biotechnology Letters
• /
• v.20 no.5
• /
• pp.519-526
• /
• 1992

The gene coding for urease of alkalophilic Bacillus pasteurii had been cloned in Escherichia coli previously. The urease protein was purified 63.1-fold by TEAE-cellulose, DEAE-Sephadex A-50, Sephadex G-150 and Sephadex G-200 chromatographies with a 7.3% yield from the sonicated fluid of the E. coli HB1Ol(pBUll) encoding B. pasteurii urease gene. The ureases of E. coli (pBUll) and B. pasteurii possessed as a $K_m$ for urea, 42.1 mM and 40.4 mM, respectively. They hydrolyzed urea with $V_{max}$ of 86.9$\mu$mol/min and 160$\mu$mol/min, respectively. Both ureases were composed with four subunits (Mrs 67,000) and a subunit (Mr 20,000). The molecular weight of both native enzymes was Mr 280,OOO$pm$10,000 determined by gel filtration chromatography and Coomassie blue staining of the subunits. The optimal reaction pH of both ureases were pH 7.5. The ureases were stabled in pH 5.5-10.5. The optimal reaction temperature of both ureases were $60^{\circ}C$, and the ureases were stable for an hour at $50^{\circ}C$, 40min at $60^{\circ}C$ and 10 min at $70^{\circ}C$ The activity of both enzymes were inhibited completely by $Ag^{2+}$, $Hg^{2+}$, $Zn^{2+}$, $Cu^{2+}$, and were inhibited 60% by CoH, 30% by $Fe^{2+}$ and 10% by $Pb^{2+}$. However it was increased by the addition of $Sn^{2+}$, $Mn^{2+}$, $Mg^{2+}$ at concentration of $1{\times}10^{-3}$M. Both ureases were inhibited completely by p-CMB and acetohydroxamic acid. The urease expressed in E. coli (pBU11) was inhibited 70% by SDS. The urease of B. pasteurii was inhibited 40% by hydroxyurea, whereas the recombinant urease of E. coli strain was inhibited 17%. Both enzymes were not inhibited by cyclohexanediaminetetraacetic acid (CDTA) and ethylendiaminetetraacetic acid (EDTA).

• Journal of Korean Society of Forest Science
• /
• v.67 no.1
• /
• pp.42-49
• /
• 1984

The elderberry was known to the ancients for its medicinal properties, and in Europe the inner back was formerly administered as a cathartic. The flowers contain a voletile oil, and serve for the distilation of elder-lower water, used in confectionery, perfumes and lotions. The leaves are employed to impart a green colour to fat and oil, and the leaves and bark emit a sickly odour, believed to be repugnant to insect. With its unique flavor and natural food colour, commercial processing companies used the fruit mainly in the making for jam, jelly, pies, juice, and wines. Its vitamin-C content is reported by Andross (1941) as 25-30mg/100g. Harvesting and processing have been mechanized to some extent. However, the cotains with nutritional value has not been reported yet. In the present study the various contains with nutritional value in the fresh elderberry juice is reported by the quantitative analysis. In this study results obtained can be summarized as follows. 1) The fresh elderberry juice contained following mineral elements; calcium 0.012%, magnesium 0.023%, potassium 0.10%, sodium 0.0019%, iron 0.0009%, cobalt 0.0002%, zinc 0.0004%, copper 0.0001%, phosphorus 0.036%, manganese 0.0006%, iodide $1{\mu}g/g$. 2) Five kinds of vitamines were also found ; vitamin-$B_1$ $0.1{\mu}g/g$, vitamin-$B_2$ $0.5{\mu}g/g$, vitamin-C 0.3mg/g, niacin $14{\mu}g/g$, choline chloride 0.3mg/g. 3) Fresh elderberry juice also contains crude protein 1.10%, fat 0.26%, carbohydrate 6.9%, pectin 0.76%, tannin 0.89%, ash 0.80%, water 90.9% and 34.3 cal/100g. 4) The absorption spectrum of the purplishblack color of fresh elderberry juice has a peak between 523-530mm.

• Food Science and Preservation
• /
• v.13 no.2
• /
• pp.186-191
• /
• 2006

Prunus mume is extensively cultivated as a fruit and medicinal plant in Korea. Recently, prunus mume has a pressing problem with an increase of prunus mume cultivation area in southern part in Korea. Chemical properties of prunus mume flower to determine the optimum processing varieties for tea were investigated. Three kinds of samples treated with fresh, freeze dry and shade dry were used. The content of moisture, crude ash, crude protein, crude fiber, crude fat and nitrogen free extract of prunus mume flower varieties were to $82{\sim}85%,\;0.2{\sim}0.6%,\;2.5{\sim}3.1%,\;2.5{\sim}3.1%,\;0.6{\sim}0.8%\;and\;10{\sim}11%$ respectively. The main component of free sugars in prunus mume flower was glucose and those of organic acids were citric and malic acids. 17 kinds of amino acids were determined from prunus mume flower. The total amino acid contents of Cheongchuk, Baeagaha and Goseong were 760.47 mg%, 624.01 mg% and 807.41 mg%, respectively. Aspartic acid, glutamic acid and lysine were the major component in 3 cultivars. The content of K was much higher than Ca, Mg, Na, fe and Zn. The major fatty acids of prunus mume flower were myristic acid, palmitoleic acid me oleic acid. As a result of analysis, there were no significant differences among the three cultivars of prunus mume flower and drying method.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2018.06a
• /
• pp.135-135
• /
• 2018

천이금속 질화물 코팅은 우수한 기계적 특성들로 인해 공구 코팅으로 많이 사용 되어왔다. 그 중에서도 특히 Cr계 경질 코팅은 높은 경도와 낮은 표면조도, 우수한 마찰특성 등 뛰어난 기계적 특성을 나타내므로 공구 코팅으로의 적용 가능성이 크다. 그러나 최근 공구산업의 발전으로 인해 공구가 더욱 가혹한 환경에서 사용됨에 따라, 공구의 수명을 향상시키고 보호하기 위해 코팅의 높은 밀착력이 요구되고 있으며, 모재와 코팅 사이에 중간층을 합성함으로써 공구의 밀착력을 향상시키는 연구가 활발히 진행되고 있다. 이전 연구에서 모재/중간층/코팅간의 경도와 탄성계수 비율(H/E ratio)의 구배가 코팅의 밀착력에 큰 영향을 미치는 것으로 확인되었다. 그러므로, WC 모재와 Cr계 코팅의 중간값의 H/E ratio를 갖는 중간층의 합성을 통해 코팅의 밀착력을 향상시킬 수 있을 것으로 판단된다. 본 연구에서는, 코팅의 밀착력을 향상시키기 위해 다양한 중간층을 증착한 CrZrN, CrAlN 코팅을 비대칭 마그네트론 스퍼터링 장비를 이용하여 합성하였다. 모재로는 디스크 형상의 WC-6wt.%Co 시편을 사용하였고 Cr, Zr, Si, Al single 타겟을 이용하여 Cr, CrN, CrZrN, CrZrSiN 등의 중간층이 증착된 코팅을 합성했다. 코팅의 합금상, 경도 및 탄성계수, 미세조직 및 조성, 표면 조도을 확인하기 위해 X-ray diffractometer (XRD), Fischer scope, field-emission scanning electron microscopy (FE-SEM), energy dispersive X-ray spectroscopy (EDS), atomic force microscopy를 사용하였고, 코팅의 밀착 특성을 분석하기 위해 scratch tester와 optical microscopy (OM)를 이용하였다. 코팅의 내열성을 확인하기 위해 코팅을 furnace에 넣어 공기중에서 500, 600, 700, 800, 900, $1,000^{\circ}C$로 30분 동안 annealing 한 후에 nano-indentation을 사용하여 경도를 측정하였다. CrZrN 및 CrAlN 코팅을 나노 인덴테이션으로 분석한 결과, 모든 코팅의 경도(33.4-35.8 GPa)와 탄성계수(384.1-391.4 GPa)는 중간층의 종류에 상관없이 비슷한 값을 보인 것으로 확인됐다. 그러나, 코팅의 마찰계수는 중간층의 종류에 따라 다른 값을 보였다. CrZrN 코팅의 경우 CrN 합금상 중간층을 갖을 때 가장 낮은 값을 보였으며, CrAlN 코팅의 경우 CrN/CrZrSiN 중간층을 증착하였을때 마찰계수는 0.34로 CrZrN 중간층을 증착하였을 때(0.41)에 비해 낮은 값을 보였다. 또한, 코팅의 마모율 및 마모폭도 비슷한 경향을 보인 것으로 보아, CrN/CrZrSiN 중간층을 합성한 CrAlN 코팅의 내마모성이 상대적으로 우수한 것으로 판단된다. 코팅의 밀착력의 경우도 마찰계수와 비슷한 경향을 보였다. 이것은 중간층의 H/E ratio가 코팅의 내마모성에 미치는 영향에 의한 결과로 사료된다. H/E ratio는 파단시의 최대 탄성 변형율로써, 모재/중간층/코팅의 H/E ratio 구배에 따라 코팅 내의 응력의 완화 정도가 변하게 된다. WC 모재 (H/E=0.040)와 CrAlN 코팅(H/E=0.089) 사이에서 CrN, CrZrSiN 중간층의 H/E ratio는 각각 0.076, 0.083으로 모재/중간층/코팅의 H/E ratio 구배가 점차 증가함을 확인 할 수 있었고, 일정 응력이 지속적으로 가해지면서 진행되는 마모시험중에 CrN과 CrZrSiN 중간층이 WC와 CrAlN 코팅 사이에서 코팅 내부의 응력구배를 완화시키는 역할을 함으로써 CrAlN 코팅의 내마모성이 향상된 것으로 판단된다. 모든 코팅을 열처리 후 경도 분석 결과, CrN/CrZrSiN 중간층을 증착한 CrAlN 코팅은 $1,000^{\circ}C$까지 약 28GPa의 높은 경도를 유지한 것으로 확인 되었고, 이는 CrZrSiN 중간층 내에 존재하는 SiNx 비정질상의 우수한 내산화성에 의한 결과로 판단된다.

• The Journal of Korean Academy of Prosthodontics
• /
• v.53 no.4
• /
• pp.318-324
• /
• 2015

Purpose: This study compared shear bond strengths of five self-adhesive cements with phosphate monomer to zirconium oxide ceramic with and without airborn particle abrasion. Materials and methods: One hundred zirconia samples were air-abraded ($50{\mu}mAl_2O_3$). One hundred composite resin cylinders were fabricated. Composite cylinders were bonded to the zirconia samples with either Permacem 2.0 (P), $Clearfil^{TM}$ SA Luting (C), $Multilink^{(R)}$ Speed (M), $RelyX^{TM}$ U200 Automix (R), G-Cem $LinkAce^{TM}$ (G). All bonded specimens were stored in distilled water ($37^{\circ}C$) for 24 h and half of them were additionally aged by thermocycling ($5^{\circ}C$, $55^{\circ}C$, 5,000 times). The bonded specimens were loaded in shear force until fracture (1 mm/min) by using Universal Testing Machine (Model 4201, Instron Co, Canton, MA, USA). The failure sites were inspected under field-emission scanning electron microscopy. The data was analyzed with ANOVA, Tukey HSD post-hoc test and paired samples t-test ($\alpha$=.05). Results: Before and after thermocycling, $Multilink^{(R)}$ Speed (M) revealed higher shear-bond strength than the other cements. G-Cem $LinkAce^{TM}$ (G) showed significantly lower bond strengths after thermocycling than before treatment (P<.05), but the other groups were not significantly different (P>.05). Conclusion: Most self-adhesive cements with phosphate monomer showed high shear bond strength with zirconia ceramic and weren't influenced by thermocycling, so they seem to valuable to zirconia ceramic bonding.

• Korean Journal of Materials Research
• /
• v.11 no.5
• /
• pp.367-371
• /
• 2001

In this paper, theS $r_2$(T $a_{1-x}$ , N $b_{x}$)$_2$ $O_{7}$(STNO) films among ferroelectric materials having a low dielectric constant for metal-ferroelectric-semiconductor field effect transistor(MFS-FET) were discussed. The STNO thin films were deposited on p-type Si(100) at room temperature by co-sputtering with S $r_2$N $b_2$ $O_{7(SNO)}$ ceramic target and T $a_2$ $O_{5}$ ceramic target. The composition of STNO thin films was varied by adjusting the power ratios of SNO target and T $a_2$ $O_{5}$ target. The STNO films were annealed at 8$50^{\circ}C$, 90$0^{\circ}C$ and 9$50^{\circ}C$ temperature in oxygen ambient for 1 hour. The value of x has significantly influenced the structure and electrical properties of the STNO films. In the case of x= 0.4, the crystallinity of the STNO films annealed at 9$50^{\circ}C$ was observed well and the memory windows of the Pt/STNO/Si structure were 0.5-8.3 V at applied voltage of 3-9 V and leakage current density was 7.9$\times$10$_{08}$A/$\textrm{cm}^2$ at applied voltage of -5V.of -5V.V.V.