• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2010년도 제39회 하계학술대회 초록집
• /
• pp.309-309
• /
• 2010

We have investigated the effect of $H_2$ plasma treatment on the BZO (ZnO:B, Boron doped ZnO) thin films. The BZO thin films are prepared by LP-MOCVD (Low Pressure Metal Organic Chemical Vapor Deposition) technique and the samples of BZO thin film are performed with $H_2$ plasma treatment by plasma treatment system with 13.56 MHz as RIE (Reactive Ion Etching) type. After exposing $H_2$ plasma treatment, measurement of transmittance, reflectance and haze spectra in 300~1100 nm, electrical properties as resistivity, mobility and carrier concentration and work function was analysed. Regarding the results of the $H_2$ plasma treatment on the BZO thin films are application to the TCO for solar cells, such as the a-Si thin films solar cell.

• Journal of Electrochemical Science and Technology
• /
• 제1권1호
• /
• pp.45-49
• /
• 2010

$Li_2PtO_3$ thin film electrodes, which might be possible candidate for the cathode materials for implantable batteries, were synthesized using an electrostatic spray deposition (ESD) technique onto a platinum foil substrate. Single phase $Li_2PtO_3$with a structure similar to layered $LiCoO_2$ structure were synthesized by spraying a precursor solution of $CH_3CO_2Li2H_2O$ in ethanol onto a Pt substrate at temperatures ranging from 200 to $400^{\circ}C$ followed by annealing at above $600^{\circ}C$. Lithium carbonate was the only major phase at temperatures up to $500^{\circ}C$. The X-ray diffraction (XRD) peaks of the Pt foil substrate and lithium carbonate disappeared at temperatures >$600^{\circ}C$. The volumetric capacity of the $Li_2PtO_3$ thin film synthesized using the ESD technique was approximately 817 mAh/$cm^3$, which exceeded that of $LiCoO_2$ (711 mAh/$cm^3$).

• Journal of Magnetics
• /
• 제10권4호
• /
• pp.163-170
• /
• 2005

The RF integrated noise filters are fabricated by photolithography. The stack for the electromagnetic noise filters consists of the nano-granular ($Co_{41}Fe_{38}AI_{13}O_8$) soft magnetic film / $SiO_2$ / Cu transmission line / seed layer (Cu/Ti) / $SiO_2$-substrate. A good signal-attenuation feature along with a low signal-reflection feature is observed in the present filters. Especially in the noise filter incorporated with a $Co_{41}Fe_{38}AI_{13}O_8$ magnetic film with lateral dimensions of $2000{\mu}m$ wide, 15 mm long and $1{\mu}m$ thick, the maximum magnitude of signal attenuation reaches -55 dB, and the magnitude of signal reflection is below -10 dB in the overall frequency range. And this level of signal attenuation is much larger than that of a noise filter incorporated with a Fe magnetic film.

• 대한치과보철학회지
• /
• 제30권3호
• /
• pp.437-443
• /
• 1992

This study was performed to investigate the availability of adhesive resin cement for luting agent of cast crown. The resin cements used in this study were Panavia-Ex(Kuraray Co., Japan) and C & B-Metabond (Parkell Bio-Materials U.S.A.). Zinc phosphate cement was Flecks zinc cement(Mizzy Inc., U.S.A.) The film thickness of cast crown at gingival margin, lateral wall and occlusal surface was observed with measuring microscope(Modek MXT 70 Matsuzawa Seiki Co., Japan) and the retention of cast crown was measured with Instron Universal Test Machine (Instron Engineering Co., U.S.A.) The results were as follows : 1. The value of retention of cast crown was the highest in the use of Panavia-EX, followed by C & B-Metabond and 2inc phosphate cement, respectively. 2. There was no difference in film thickness among the three cements, but the film thickness in all cements was highest at occlusal surface.

• 조명전기설비학회논문지
• /
• 제30권1호
• /
• pp.1-7
• /
• 2016

With a collimated $CO_2$ laser beam, the bidirectional current switching was realized in a two-terminal electronic device based on a highly resistive vanadium dioxide($VO_2$) thin film. A $VO_2$ thin film was grown on a $Al_2O_3$ substrate by a pulsed laser deposition method. For the fabrication of a two-terminal electronic device, the $VO_2$ thin film was etched by an ion beam-assisted milling method, and the $VO_2$ device, of which $VO_2$ patch width and electrode separation were 50 and $100{\mu}m$, respectively, was fabricated through a photolithographic method. A bias voltage range for stable bidirectional current switching was found by using the current-voltage property of the device measured in a current-controlled mode. The transient responses of bidirectionally switched currents were analyzed when the laser was modulated at a variety of pulse widths and repetition rates. A switching contrast was measured as ~3333, and rising and falling times were measured as ~39 and ~21ms, respectively.

• 한국자기학회지
• /
• 제5권5호
• /
• pp.528-532
• /
• 1995

Ferromagnetic resonance experiments have been used to investigate the magnetic properties of amorphous $Co_{89.5}Zr_{10.5}$ thin films deposited by DC magnetron sputtering method. In the thickness range from $350\;{\AA}$ to $3,200\;{\AA}$, measurements were carried out in a static magnetic field perpendicular and parallel to the film plane and in a conventional 9.44 GHz spectrometer at room temperature. The ferromagnetic resonance spectra by the field perpendicular to the film plane showed standing spin wave. The spacing and the relative intensities between the various spin wave resonance peaks are analysed considering surface magnetic anisotropy. The surface magnetic anisotropy constant ($K_{so},\;K_{sd}$) of amorphous $Co_{89.5}Zr_{10.5}$ thin films are $0.02\;erg/\textrm{cm}^2$ and $0.55\;erg/\textrm{cm}^2$ respectively regardless of the film thickness except for $3,200\;{\AA}$ film. In case of $3,200\;{\AA}$ these values are $0.46\;erg/\textrm{cm}^2$ and $0.55\;erg/\textrm{cm}^2$ respectively.

• 한국재료학회지
• /
• 제29권11호
• /
• pp.715-719
• /
• 2019

Molybdenum is a low-resistivity transition metal that can be applied to silicon devices using Si-metal electrode structures and thin film solar cell electrodes. We investigate the deposition of metal Mo thin film by plasma-enhanced atomic layer deposition (PE-ALD). $Mo(CO)_6$ and $H_2$ plasma are used as precursor. $H_2$ plasma is induced between ALD cycles for reduction of $Mo(CO)_6$ and Mo film is deposited on Si substrate at $300^{\circ}C$. Through variation of PE-ALD conditions such as precursor pulse time, plasma pulse time and plasma power, we find that these conditions result in low resistivity. The resistivity is affected by Mo pulse time. We can find the reason through analyzing XPS data according to Mo pulse time. The thickness uniformity is affected by plasma power. The lowest resistivity is $176{\mu}{\Omega}{\cdot}cm$ at $Mo(CO)_6$ pulse time 3s. The thickness uniformity of metal Mo thin film deposited by PE-ALD shows a value of less than 3% below the plasma power of 200 W.

• 한국식품과학회지
• /
• 제37권6호
• /
• pp.933-938
• /
• 2005

감자절편의 포장재 및 포장방법에 따른 저장 중 품질 변화를 조사하였다. 감자절편을 무포장, polyethylene film(PE), polypropylene film(PP), anti-fogging film(AF), perforated film(PF)을 이용한 일반 MA포장과 Nylon/PP film을 이용한 가스치환포장(MA1, MA2) 및 진공(VF)포장을 한 후 $5^{\circ}C$에 저장하면서 중량감소, 표면색, 비타민 C 함량 및 관능적 품질변화를 조사하였다. 저장 중 감자의 호흡률은 절단 한 것이 절단하지 않은 것에 비하여 2.11배 높았다. 포장 내 기체조성은 밀봉 7일 이후부터 $O_2$농도는 1-2% 내외로 안정되었고, $CO_2$농도는 포장재질에 따라서 4-14% 범위를 유지하였다. 중량감소와 갈변발생은 PP 포장구와 MA2 포장구에서 적었고, 경도는 포장구간에 유의적인 차이를 나타내지 않으며, 비타민 C 함량은 AF포장구에서 가장 적은 변화를 나타내었다. 관능적 품질은 MA2 포장구가 저장 10일까지 가장 우수하였으며, 그 다음에 PP포장구 및 AF포장구순으로 우수하였다.

• 한국식품저장유통학회지
• /
• 제8권3호
• /
• pp.286-290
• /
• 2001

PE필름과 스티로폴 상자를 이용한 생강 저장시 탄산가스 흡착제 및 저장 온 .습도가 생강의 저장성에 미치는 영향을 구명하기 위하여 PE필름이나 스티로폴 상자에 생강을 저장하여 온 습도와 환기공수 및 탄산가스 흡착제 처리에 따른 효과를 검토해 본 결과는 다음과 같다. PE 필름 포장에 의해 중량감소가 현저하게 억제되었으며 0.05 mm보다 0.08 mm에서 중량감소율은 낮았으나 부패율 및 곰팡이발생율이 높았고, 저장온도별로는 15$^{\circ}C$에 비하여 1$0^{\circ}C$에서 중량감소율이 낮고 건전율이 높았으며 저장중 발아가 되지 않아 저장성이 양호하였다. PE필름 두께가 얇고 환기공수가 많을수록 중량감소율은 높았으나 건전율은 0.05 mm에서는 직경 6 mm 크기의 환기공 1개 처리구가, 0.08 mm에서는 환기공 3개 처리구에서 높았으며, 탄산가스 흡착제를 넣어 줌으로써 무처리에 비해 포장내 $CO_2$ 농도가 낮아지고, 부패율 및 곰팡이 발생율이 낮았다. 스티로폴 상자를 이용할 때에도 탄산가스 흡착제 처리로 건전율이 높아졌으며 활성탄이 나 소석회간에 큰 차이는 없었고 상대습도 65%에 비하여 92%에서 건전율이 높았으나, 10% 내외의 발아율을 나타냈다. 이상의 결과로 생강저장 적정 온.습도는 1$0^{\circ}C$, 92% 이며, 저장시 소석회를 처리하므로서 저장성을 높일 수 있을 것으로 사료된다.

• 한국수소및신에너지학회논문집
• /
• 제22권3호
• /
• pp.319-325
• /
• 2011

The electrical properties of sputtered GDC thin films on $Al_2O_3$ substrates was studied. The electrical properties of the films were measured to evaluate the ion conductivity of GDC thin films for co-planar SOFC electrolytes. The impedance of the GDC thin films on $Al_2O_3$ substrates was affected by the film thickness and the impedance of thin film exhibited higher value than thick films. Similarly, the conductivity of the thick film showed much higher value than thin films. It indicated that the film thickness is the main factor affecting the conductivity and impedance of the GDC electrolyte for the co-planar SOFC.