• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08b
• /
• pp.1664-1667
• /
• 2007

The belt source evaporation is for the large size AMOLED devices to re-sublimate the organic film deposited on the metal plate. Using the plane source, the PL spectrum of the doped organic film has been studied for the first time. The PL peak of the pure Alq3 film was 512nm and that of the pure Rubrene was 557nm. The PL peak of the 2% Rubrene doped Alq3 film was shifted to $536{\pm}2nm$. The PL peak wavelength measured at the front surface of the film and at the back surface of the film was measured as nearly same as that the doping ratio maintains uniform within the film thickness. In conclusion, the doping control of the organic film becomes real using the belt type plate sublimation deposition.

• Journal of the Korean Society for Precision Engineering
• /
• v.33 no.3
• /
• pp.231-234
• /
• 2016

Pouch film is manufactured by laminating aluminum foil, polyamide film and polypropylene film with an adhesive or extrusion resin. However, a surface treatment is required for the aluminum because bonding does not occur easily between the aluminum foil and the polymer film. Thus, for this study, surface treatment experiments were performed in order to confirm the effect on adhesion strength. First, a variety of surface treatment solutions were coated on aluminum foil, and contact angle and surface morphology analysis was carried out for the surface-treated aluminum. For lamination of the surface-treated aluminum foil with polyamide film, a polyurethane base adhesive was prepared for the adhesive strength test specimens. The adhesive strength between the aluminum foil and the polyamide film of the resulting specimens was measured (UTM). With such an experiment, it was possible to evaluate the effect on adhesive strength of the various surface treatments.

• Journal of the Korean Ceramic Society
• /
• v.36 no.10
• /
• pp.1075-1079
• /
• 1999

LaSrCoO3 thin films were spin-coated onto the SrTiO3(100) substrates by the chemical solution process. X-ray diffraction $\theta$-2$\theta$ scans and X-ray diffraction $\beta$ scans were used to determine the crystallinity and in -plane alignment behavior of the films. The X-ray diffraction pattern showed the film obtained by annealing at 80$0^{\circ}C$ was highly oriented. The X-ray diffraction pole-figure analysis and reciprocal-space mapping (2$\theta$-$\Delta$$\omega$ scans) of the resulting film showed that the film comprising the pseduocubic phase had an epitaxial relationship with the SriO3 substrate.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.12S
• /
• pp.1305-1309
• /
• 2003

To utilize FeCoSiB amorphous films for magnetoelastic sensors, the temperature dependency of magnetization (M-T curve) and the magnetization properties of the amorphous films were investigated in this study. As the amount of cobalt In the films increased, the Curie temperature decreased but the crystallization temperature increased. In addition to this, the crystallization temperature was lower than the Curie temperature in the film containing 20 at% cobalt. The optimized annealing condition was set up by analyzing the H-T curve. And then, the amorphous film that has excellent magnetic properties and uni-axal anisotropy could be prepared for construction of the magnetoelastic sensor devices. The coercive force of the film was below 0.5 Oe and the anisotripic field was about 5 Oe.

• Journal of the Korean Magnetics Society
• /
• v.11 no.3
• /
• pp.109-113
• /
• 2001

Presently, an inductor adapted at MMIC (Monolithic Microwave Integrated Circuit) which is used for cellular phone or PHS operates at quasi-microwave range over 800 MHz. However, a W-CDMA (Wideband Code Division Multiple Access) will use about 2 GHz range. Therefore magnetic film device should be compatible up to 2 GHz. We have deposited Co-Pd-Al-O system film using rf sputtering method which is expected up to 2 GHz, and investigated the effect of Pd content and magnetic field annealing. When Pd composition is 19%, Hk was 118 Oe, and ${\mu}$′showed flat frequency characteristics up to 1.5 GHz. The Q factor (=${\mu}$′/${\mu}$") was 23.3 at 1 GHz, 6.7 at 1.5 GHz and 1.5 at 2 GHz, respectively. Resonance frequency was 2 GHz. Therefore Co-Pd-Al-O thin film could be used at over 1 GHz, and also expected as an inductor material for wide band CDMA type cellular phone.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.145-148
• /
• 2007

The authors report on the fabrication of thin film transistors (TFTs) that use amorphous indium-gallium-zinc oxide (a-IGZO) channel and have the channel length (L) and width (W) patterned by dry etching. To prevent the plasma damage of active channel, a 100-nm-thckness $SiO_{x}$ by PECVD was adopted as an etch-stopper structure. IGZO TFT (W/L=10/50${\mu}m$) fabricated on glass exhibited the high performance mobility of $35.8\;cm^2/Vs$, a subthreshold gate voltage swing of $0.59V/dec$, and $I_{on/off}$ of $4.9{\times}10^6$. In addition, 4.1” transparent QCIF active-matrix organic light-emitting diode display were successfully fabricated, which was driven by a-IGZO TFTs.

• Journal of the Microelectronics and Packaging Society
• /
• v.27 no.3
• /
• pp.41-47
• /
• 2020

The effect of Co interlayer on the interfacial reliability of SiN_x/Co/Cu thin film structure for advanced Cu interconnects was systematically evaluated by using a double cantilever beam test. The interfacial adhesion energy of the SiN_x/Cu thin film structure was 0.90 J/㎡. This value of the SiN_x/Co/Cu thin film structure increased to 9.59 J/㎡.Measured interfacial adhesion energy of SiN_x/Co/Cu structure was around 10 times higher than SiN_x/Cu structure due to CoSi₂ reaction layer formation at SiN_x/Co interface, which was confirmed by X-ray photoelectron spectroscopy analysis. The interfacial adhesion energy of SiN_x/Co/Cu structure decreased sharply after post-annealing at 200℃ for 24 h due to Co oxidation at SiN_x/Co interface. Therefore, it is required to control the CoO and Co₃O₄ formation during the environmental storage of the SiN_x/Co/Cu thin film to achieve interfacial reliability for advanced Cu interconnections.

• The Korean Journal of Ceramics
• /
• v.6 no.2
• /
• pp.100-102
• /
• 2000

Co fine particles were dispersed in Au metal and $AlO_x$ amorphous matrices by vacuum evaporation and rf-sputtering, respectively, thus forming granular composite films having chemical compositions of $Co_{0.59}-Au_{0.41}$ and $Co_{0.52}/(AlO_x$)_{0.48}$. The films were annealed at 200~$500^{\circ}C$ to increase the size of the Co particles, from 30$\AA$ to 180$\AA$ in the Au matrix and 40$\AA$ to 180$\AA$ in the $AlO_x$ matrix, as revealed by X-ray diffraction analysis. The Co metal in as-deposited films have saturation magnetization equivalent to that of bulk Co, which is unchanged by the annealing, showing that the Co metal is not oxidized by the annealing. Magneto-optical Kerr rotation measured at $\lambda$=400-900nm for the $Co_{0.59}-Au_{0.41}$ film as deposited is larger than that calculated for the composition. The rotation increases as the film is annealed at $200^{\circ}C$ and $300^{\circ}C$, approaching to that of bulk Co. The Kerr rotation for the $Co_{0.52}-(AlO_x)_{0.48}$ film as deposited is smaller than that calculated for the composition based on Bruggeman effective medium theory. However, the rotation increases much, exceeding the rotation of the bulk Co as annealed at $300^{\circ}C$ and $400^{\circ}C$. As a possible origin of the marked magneto-optical enhancement a weak localization of light in granular structure is suggested.

• Korean Chemical Engineering Research
• /
• v.56 no.6
• /
• pp.895-900
• /
• 2018

In this study, the electroless deposition of Co-B and Co-W-B alloy thin films was developed and the effect of B and W contents on the hardness of the alloy thin films were investigated. An amorphous Co alloy film was successfully formed by electroless deposition and the contents of B and W in the film were controlled by varying the concentrations of dimethylamine borane and sodium tungstate dihydrate, which were used as a reducing agent and W source, respectively. The hardness of the thin films increased as the contents of B and W were increased because B and W act as impurities suppressing the propagation of dislocation in a film. In addition, it was found that the content of B and W in the Co alloy films can be increased significantly when aeration is not performed. Finally, the hardness of Co-W-B alloy thin film was improved up to 8.9 (${\pm}0.3$) GPa.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.13 no.2
• /
• pp.21-27
• /
• 2014

Recently, various biochip environments have been presented. In this study, a novel transparent film with porous membrane windows, which is an essential component in a co-cultured biochip environment, is fabricated using spin-coating, 3D printing, and electrospinning processes. In detail, a transparent polystyrene film was fabricated by means of the spin-coating process followed bywindow cutting, after which apolycaprolactone-chloroform solution was deposited along the window edge to introduce an adhesion layer between the PS film and the PCL nanofibers. Nanofibers were electrospun into the window region using a direct-write electrospinning method. Consequently, it was demonstrated that the fabricated window film could be used in a co-culture biochip environment.