• Journal of the Korean Operations Research and Management Science Society
• /
• v.22 no.2
• /
• pp.139-151
• /
• 1997

An ATM switching system may be designed so that communications between processors of its control part can be performed via its switching network rather than a separate inter-processor communications (IPC) network. In such a system, there should be interfaces to convent IPC traffic from message format to cell format and vice versa, that is, mechanisms to perform the SAR (Segmentation And Reassembly) sublayer functions. In this paper, we concern the cell reassembly mechanism among them, mainly focussed on buffer management schemes. We consider a few alternatives to implement cell reassembly function block, namely, separated buffering, reserved buffering and shared buffering in this paper. In case of separated and reserved buffering, we employ a continuous time Markov chain for the performance evaluation of cell reassembly mechanism, judicially defining the states of the mechanism. Performance measures such as measage loss probability, mean number of message queued in buffer and average reassembly delay are obtianed in closed forms. In case of shared buffering, we compare the alternatives for implementing cell reassembly function block using simulation because it is almost impossible to analyze the mechanism of shared buffering by analytical modeling. Some illustrations are given for the performance analysis of the alternatives to implement cell reassembly function block.

• Transactions of the Korean hydrogen and new energy society
• /
• v.17 no.3
• /
• pp.279-285
• /
• 2006

Recirculation for the unreacted fuel is necessary to improve the overall efficiency of the fuel cell system and to prevent fuel starvation since the fuel cell for a vehicle application is a closed system. In case of the automotive fuel cell, the ejector which does not require any parasitic power is good for the performance improvement and easy operation. It is essential to design the customized ejector due to the lack of the commercial ejector corresponding to the operating conditions of the fuel cell systems. In this study, the design methodology for the ejector customized to an automotive fuel cell is proposed. The model based sensitivity analysis prevents the time-consuming redesign and reduces the cost of developing ejector. As a result, the customized ejector to meet the desired performance within overall operating range has developed for the PEMFC automotive system.

• Transactions of Materials Processing
• /
• v.21 no.4
• /
• pp.228-233
• /
• 2012

In this study, powder compaction of AZO (alumina doped zinc oxide) powder was performed with a MTS 810 test system using a cylindrical die having a diameter of 10mm. Pressure-density curves were measured based on the load cell and displacement of the punch. The AZO powder compacts with various densities were formed to investigate the mechanical properties such as fracture stress of the AZO powder as a function of the compact density. Two types of compression tests were conducted in order to estimate the fracture stress using different loading paths: a diameteral compression test and a uniaxial compression test. The pressure-density curves of the AZO powder were obtained and the fracture stress of the compacted powders with various densities was estimated. The results show that the compact pressure dramatically increases as the density increases. Based on the experimental results, calibration of the modified Drucker-Prager/Cap model of the AZO powder for use in FE simulations was developed.

• Journal of Advanced Marine Engineering and Technology
• /
• v.18 no.2
• /
• pp.1-17
• /
• 1994

잠수함추진방식은 크게 원자력 추진과 재래식 추진으로 나눌수 있다. 최근에는 재래식 추진방식과 하이브리드 개념으로 운용될 수 있는 AIP(Air Independent Propulsion)방식도 활발히 연구되고 있다. AIP추진으로는 폐회로 디젤기관추진(Closed Cycle Diesel Engine Propulsion), 연료전지추진(Fuel Cell Propulsion), 스터링기관추진(Stirling Engine Propulsion) 및 폐회로터빈추진(Closed Cycle Turbin Propulsion) 등이 있다. 이러한 잠수함 추진체계에 대해 앞으로 크게 세부분으로 나누어 그 현황과 발전추세를 살펴보고자 한다. 즉, 초기의 순수전기추진방식으로 불리는 재래식 추진체계, 재래식 추진방식의 한계를 극복하기 위해 최근 활발히 연구되고 있는 외기와 무관한 추진장치인 폐회로 추진체계, 그리고 궁극적으로는 에너지의 문제로 귀착되어 거의 무한대의 에너지원을 가지고 있는 원자력 추진체계로 구분하여 그 현황과 발전내용을 살펴 봄으로써 잠수함추진체계의 국내연구 개발방향정립에 조금이나마 보탬이 되었으면 합니다. 또한 차세대 추진장치로 불리는 전자유체 추진방식에 대해서는 한국박용기관 학회지 1993년 4월호 "박용전자유체(MHD) 추진장치"를 참조하시기 바랍니다.조하시기 바랍니다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2011.05a
• /
• pp.98-99
• /
• 2011

300 mm급 선형 이온원의 방전 간격에 따른 방전 및 이온빔 인출 특성 변화를 연구하였다. 방전 간격이 2 mm 에서 3 mm로 증가함에 따라 동일 방전 전압에서 방전 전류가 약 20% 증가하였으며, 이는 방전 공간 내 플라즈마 발생 증가에 의한 것임을 object oriented particle in cell 전산모사를 통해 확인하였다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.20 no.2
• /
• pp.60-66
• /
• 2016

Polyurethane foam index a of the cell structure and the absorption change by using the foam stabilizer of six to investigate the polyurethane foam index producing the agent to the siloxane analyzed with silicon foam stabilizer with FE-SEM in accordance with the characteristics of the silicon-based foam stabilizer cell structure of the primary DC-193 on the chain ends is PO n dog bond, DC-2585, DC-5125, DC-198 has been confirmed as a close cell, silicone surfactant is combined EO n dog to a siloxane main chain terminus DC-5043 and DC-5598 that appeared to open cell structure. In addition, most absorption of the DC-5043 appeared was the size of the open cell greatest formed by the absorption of the cell structure change this absorption of the size of the close cell most detailed and uniform DC-193 appeared small household water-resistant best many showed. The performance test of the water was found to be excellent.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.34S no.10
• /
• pp.1-8
• /
• 1997

In this paper, we propose a call admission control scheme which can be used in real environment for the traffic cibtrik if a base station if DS-CDNA cellular systems. The proposed scheme estimates the mean and variance of other cell interference by using the values used for the closed loop power control. The reerse link capacity of the base station can be calculated by using the estimated mean and variance of other cell interference. The base station admits a call only if the number of users is less than the calculated reverse link capacity. In addition, we propose a simple method to obtain the equivalent number of voice call users per one data call user in multi-rate traffic environment. The method can be applied to call admission control in multi-rate traffic environment.

• Journal of Communications and Networks
• /
• v.18 no.6
• /
• pp.873-883
• /
• 2016

In this paper, we focus on maximizing weighted sum energy efficiency (EE) for a multi-cell multi-user channel. In order to solve this non-convex problem, we first decompose the original problem into a sequence of parallel subproblems which can optimized separately. For each subproblem, a base station employs dirty paper coding to maximize the EE for users within a cell while regulating interference induced to other cells. Since each subproblem can be transformed to a convex multiple-access channel problem, the proposed method provides a closed-form solution for power allocation. Then, based on the derived optimal covariance matrix for each subproblem, a local optimal solution is obtained to maximize the sum EE. Finally, simulation results show that our algorithm based on non-linear precoding achieves about 20 percent performance gains over the conventional linear precoding method.

• Proceedings of the KIEE Conference
• /
• 1994.07a
• /
• pp.85-87
• /
• 1994

Feeding biological cells one by one is the key point in the manipulation of cells. The conventional valve systems have many difficulties in feeding cells one by one, because they shut the whole flow of fluids when they are closed and have possibilities of breaking the fragile cells. They need some other equipments for continuous supply of suspension and to protect the cells. We design a check valve for feeding biological cells one by one using polyimide all the silicon substrate. The cells are fed by hydraulic pressure through the isotropically etched cavity. When the suspension flows continuously along the channel the valve is bent by hydraulic pressure and a cell is fed to the outlet. We have studied a cell fusion device fabricated with polyimide and electroplating. If the designed check valve is located in front of the cell fusion device it is helpful to fuse two different kinds of cells.

• Macromolecular Research
• /
• v.16 no.5
• /
• pp.467-472
• /
• 2008

Rigid polyurethane foams (RPUFs) were fabricated from crude MDI (CMDI) and polypropylene glycols (PPGs) of various isocyanate indices with a physical blowing agent (HFC 365mfc). There was a tendency for the gel time to decrease and the tack-free time to increase with increasing index value. With increasing index value the foam density and compression strength decreased and the glass transition temperature, dimension stability and thermal insulation increased, while the cell size and closed cell content were virtually unchanged. Allophanate crosslinks and condensation reactions between the isocyanate groups, which are favored with a high index value, exerted significant effects on the properties of RPUFs.