• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.33B no.3
• /
• pp.56-61
• /
• 1996

In this paper, new buck converter of a TV power system is presented. First, we devised a revised driving circuit for an emitter-coupled type buck converter, by which it is possible to reduce the material cost of transformers and voltage stress of power device. Secondly, we adopted a hybrid oscillation technique. When TV system is in off-stage, initial standby power which is necessary for remote controllable TV system is supplied by self-oscillating mode. Main power which is necessry in TV system bing on state is provided by an externally triggered oscillating mode. The switching frequency is synchronized to the oscillating frequency of horizontal deflection in TV, by which we can reduce picture noises and the size of power transformer. Thirdly, a simple error amplifier is inserted to the feed-back loop to keep the output voltage constant which means pulse width modulatio mode is added in driving part of power device. Finally, we showed by experiments that our proposed converter performs well enough to be close to the theoretically predicted values.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.511-514
• /
• 2005

This paper propose an advanced control strategy to improve vehicle handling and directional stability by integrating Active Front Steering(AFS) with Electronic Stability Program(ESP) . The effect of the integrated control system on the vehicle handling characteristics and directional stability is studied through a close loop computer simulation of and eight degree of freedom nonlinear vehicle model and driver model. Simulation results confirm the effectiveness of the proposed control system and the overall improvements in vehicle handling and directional stability

• Journal of Electrical Engineering and Technology
• /
• v.6 no.4
• /
• pp.519-526
• /
• 2011

An investigation of the mechanism of period-doubling bifurcation in a voltage mode controlled buck-boost converter operating in discontinuous conduction mode is conducted from the viewpoint of nonlinear dynamical systems. The discrete iterative model describing the dynamics of the close-loop is derived. Period-doubling bifurcation occurs at certain values of the feedback factor. Results from numerical simulations and experiments are provided to verify the evolution of perioddoubling bifurcation, and the results are consistent with the theoretical analysis. These results show that the buck-boost converters exhibit a wide range of nonlinear behavior, and the system exhibits a typical period-doubling bifurcation route to chaos under particular operating conditions.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.700-701
• /
• 2011

This paper introduces the modeling of PhotoVoltaic(PV) using eMEGASim. For being close to reality, the model controls the MPPT and inverter in system which composed of closed-loop using eMEGASim. Thus, the results of real-time simulation show that outputs of the PV Arrays are more realistic.

• Proceedings of the KIPE Conference
• /
• 2011.07a
• /
• pp.171-172
• /
• 2011

The paper proposes a close loop control algorithm for Z-source inverter. The algorithm is realized by PWM duty ratio control in order to improve the output voltage to it's desired level. The controller consist of the output voltage PID controller and DC input voltage P controller. Using the DQ coordinate transformation simplify the controller design. The PSIM simulation results verify the validity by means of comparing the system with or without compensation and estimating if the system has output consistency function when ZSI's load and input voltage value changing.

• Proceedings of the KIEE Conference
• /
• 2000.11d
• /
• pp.686-688
• /
• 2000

In this paper, a new method for system identification is proposed. Unknown dynamic system is identified to the second order transfer function, which can be applied to PID controller design. First, overshoot$(o_s)$, settling time$(t_s)$, and steady state value$(y_{ss})$ are obtained from the step response of unknown dynamic system. And then, we can get the second order transfer function using equations which are extracted from those three parameters$(o_s,t_s,y_{ss})$ through mathmatical analysis. In addition, simulation is carried out to show excellent performance of proposed identification method compare with other.

• Proceedings of the KIEE Conference
• /
• 2004.07d
• /
• pp.2386-2388
• /
• 2004

Recently, rapid process of network technology has an effect on the field of control engineering. And it gives effect to network control system(NCS) research that grafts existing control system and network has been studied. According to one-chip development of TCP/IP that is the most useful in LAN server for hardware, it can usefully and conveniently apply to network control system before. This paper construct network control system that can work close-loop control takes advantage of Ethernet that is the most for general data transmission network. Here, protocol uses for data transmission makes use for TCP/IP. This work the basic data transmitter-receive experiment to take advantage of network node was produced. And then, DC-motor can be control plant. Finally, I will prove to build speed control system of multiple DC-motor through Ethernet.

• Proceedings of the IEEK Conference
• /
• 2003.07b
• /
• pp.1109-1112
• /
• 2003

본 연구는 switching mode 의 Power NMOSFET failure mode 에 관하여 분석하고 원인을 규명하였다. 분석된 power NMOSFET은 30V급이며, vender A의 상용화 제품이다. 발생한 failure mode는 power switch 회로에서 특정 ID 를 detect 하지 못하는 mode 였다. 측정결과 source voltage 가 저하되었으며, power NMOSFET DC 동작특성 분석 결과 Vgs 변화에 따라 Id 가 저하되었다. Fail 된 power MOSFET 특성값 reference는 동일 LOT의 양품을 선정하였다. De-cap후 Inversion 과 Accumulation mode 별로 Photoemission spectrum analyzer(PSA) 분석 방법을 적용하였다. 결과 accumulation mode 에서 intensity가 감소하였으며, forward diode mode에서 국소적으로 변화하는 영역이 검출되었다. SEM 분석결과 gate metal 과 source metal 의 micro-contact 이 이루어져 있었다. 이 경우 gate metal 과 source metal 사이 close loop 를 형성하여 gate charge량을 변화시켜 power NMOSFET의 출력을 저하하는 failure mode가 발생됨을 분석할 수 있었다.

• Korean Journal of Crystallography
• /
• v.12 no.3
• /
• pp.157-161
• /
• 2001

The observe relaxation phenomena and freezing behavior in Pb(Mg/sub ⅓/Nb/sub ⅔/O₃, relaxor ferroelectrics, weak electric-field properties as well as strong electric-field properties were investigated. The temperature dependence of the dielectric properties obtained using the low electric-field of 1 V/w was investigated. The dielectric properties obtained from the slope of the dielectric hysteresis loop and the temperature dependence of the pyroelectric properties were also investigated. When fitting all the experimental data with the Vogel-Filcher relation, a close agreement between the experimental data and equation was observed. The freezing temperature could be consistently calculated by the various methods.

• Korean Journal of Optics and Photonics
• /
• v.12 no.1
• /
• pp.10-16
• /
• 2001

A new digital serrodyne (DS) signal processor for the close-loop fiber optic gyroscope was designed and implemented. It is based on a new algorithm that can solve the remaining problems of the existing digital serrodyne processing by utilizing a new modulation wavefonn. The algorithm was implemented in an FPGA and tested. Theoretical limit and experimental value of the random walk were measured to be 2.6 and 3.3 deg/hr/$\sqrt{Hz}$, respectively. And drift of the processor is smaller than that by Shupe's effect.effect.