• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 학술대회 논문집 정보 및 제어부문
• /
• pp.391-393
• /
• 2004

For performance and stability of a synchronized system, we need an efficient Clock Tree Synthesis(CTS) methodology to design clock distribution networks. In a system-on-a-chip(SOC) design environment, CTS effectively distributes clock signals from clock sources to synchronized points on layout design. In this paper, we suggest the pre-layout analysis of the clock network including gated clock, multiple clock, and test mode CTS optimization. This analysis can help to avoid design failure with potential CTS problems from logic designers and supply layout constraints so as to get an optimal clock distribution network. Our new design flow including pre-layout CTS analysis and structural violation checking also contributes to reduce design time significantly.

• Journal of Computing Science and Engineering
• /
• 제6권4호
• /
• pp.257-266
• /
• 2012

This paper overviews clock design problems related to the circuit reliability in deep submicron design technology. The topics include the clock polarity assignment problem for reducing peak power/ground noise, clock mesh network design problem for tolerating clock delay variation, electromagnetic interference aware clock optimization problem, adjustable delay buffer allocation and assignment problem to support multiple voltage mode designs, and the state encoding problem for reducing peak current in sequential elements. The last topic belongs to finite state machine (FSM) design and is not directly related to the clock design, but it can be viewed that reducing noise at the sequential elements driven by clock signal is contained in the spectrum of reliable circuit design from the clock source down to sequential elements.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제52권2호
• /
• pp.93-101
• /
• 2003

Scan design is a structured design-for-testability technique in which flip-flops are re-designed so that the flip-flops are chained in shift registers. The scan design cannot be used in a design with scan design rule violations without modifying the design. The most important scan design rule is concerning clock and reset signals to pins of the flip-flops or scan cells. Clock and Reset pins of every scan cell must be controllable from top-level ports. We propose a new technique to re-design gated clocks and resets which violate the scan design rule concerning the clock and reset pins. This technique substitutes synchronous sequential circuits for gated clock and reset designs, which removes the clock and reset rule violations and improves fault coverage of the design. The fault coverage is improved from $90.48\%$ to $100.00\%$, from $92.31\%$ to $100.00\%$, from $95.45\%$ to $100.00\%$, from $97.50\%$ to $100.00\%$ in a design with gated clocks and resets.

• 대한전자공학회논문지SD
• /
• 제41권5호
• /
• pp.43-50
• /
• 2004

현재의 반도체 공정은 Deep Sub- Micmn (DSM)으로 발전하면서, 선폭이 줄어들고 구동 주파수가 높아지고 있다. 이로 인해 clock source로부터 clock을 필요로 하는 각 단자(sink)까지의 '지연시간의 최대 차'로 정의되어지는 clock skew가 회로의 속도 향상에 있어 중요 제약요소가 되고 있다. 또한 이를 얼마나 줄이느냐 하는 것은 동기식 회로 설계에 있어 중요한 문제가 되고 있다. 따라서 낮은 clock skew를 위한 배선 기술에 대해 많은 연구들이 이루어지고 있다. 본 논문에서는 clock skew를 줄이기 위한 방법으로서 새로운 Advanced clock Tree Generation(ACTG) 방법을 개발하였다. ACTG는 2단계의 계층적 routing을 통해 최적의 clock tree를 구성한다. 본 논문에서 제안하는 알고리즘을 C 언어로 프로그램하여 구현하 후 벤치마크 테스트 데이터에 대하여 실험한 결과, 주어진 skew 범위를 만족시키면서 지연 시간을 감소시키는 효과를 얻을 수 있었다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제13권1호
• /
• pp.71-78
• /
• 2013

In highly reliable and durable systems, failures due to aging might result in catastrophes. Aging monitoring techniques to prevent catastrophes by predicting such a failure are required. Aging can be monitored by performing a delay test at faster clocks than functional clock in field and checking the current delay state from the test clock frequencies at which the delay test is passed or failed. In this paper, we focus on test clock control scheme for a system-on-chip (SoC) with multiple clock domains. We describe limitations of existing at-speed test clock control methods and present an on-chip faster-than-at-speed test clock control scheme for intra/inter-clock domain test. Experimental results show our simulation results and area analysis. With a simple control scheme, with low area overhead, and without any modification of scan architecture, the proposed method enables faster-than-at-speed test of SoCs with multiple clock domains.

• ETRI Journal
• /
• 제36권6호
• /
• pp.931-941
• /
• 2014

Many methodologies for clock mesh networks have been introduced for two-dimensional integrated circuit clock distribution networks, such as methods to reduce the total wirelength for power consumption and to reduce the clock skew variation through consideration of buffer placement and sizing. In this paper, we present a methodology for clock mesh to reduce both the clock skew and the total wirelength in three-dimensional integrated circuits. To reduce the total wirelength, we construct a smaller mesh size on a die where the clock source is not directly connected. We also insert through-silicon vias (TSVs) to distribute the clock signal using an effective clock TSV insertion algorithm, which can reduce the total wirelength on each die. The results of our proposed methods show that the total wirelength was reduced by 12.2%, the clock skew by 16.11%, and the clock skew variation by 11.74%, on average. These advantages are possible through increasing the buffer area by 2.49% on the benchmark circuits.

• International Journal of Advanced Culture Technology
• /
• 제4권4호
• /
• pp.30-37
• /
• 2016

In this paper, the method of controlling the clock that is inputted on the hardware from the application, and the hardware design method are to be proposed. When the hardware is synthesized to the Field Programmable Gate Array(FPGA), the input clock is fixed, and when the input clock is changed, the synthesis process must be passed again to require more time. To solve this problem, the Mixed-Mode Clock Manager(MMCM) module is mounted to control the MMCM module from the application. The controlled MMCM module controls the input clock of the module. The experiment was process the Neural Network algorithm in the x86 CPU and SIMT based processor mounted the FPGA. The results of the experiment, SIMT-based processors, the time that is processed at a frequency of 50MHz was 77ms, 100MHz was 34ms. There was no additional synthesis time due to a change of the clock frequency.

• 한국디자인학회:학술대회논문집
• /
• 한국디자인학회 1996년도 디자인 학 연구 제 4회 춘계학술연구발표대회 개요 집
• /
• pp.3-4
• /
• 1996

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2014년도 추계학술대회
• /
• pp.163-164
• /
• 2014

의사위성은 GPS 위성의 백업 시스템으로 활용하거나 실내항법을 위한 목적으로 운용되며, 지상에 설치되어 GPS 위성과 유사한 신호를 송신한다. 의사위성의 의사거리 측정치 활용을 위해서는 항법 시스템과 의사위성간의 시각동기가 필수적이다. 본 논문에서는 GPS 위성과 의사위성간 시각동기를 위한 모니터링 시스템의 설계를 제안한다. 모니터링 시스템을 통해 의사위성의 시각동기 정확도를 분석하고 시각오차 보정에 활용하도록 한다.

• IEIE Transactions on Smart Processing and Computing
• /
• 제6권3호
• /
• pp.220-227
• /
• 2017

Technology development is leading to the invention of more sophisticated electronics appliances that require long battery life. Therefore, saving power is a major concern in current-day scenarios. A notable source of power dissipation in sequential structures of integrated circuits is due to the continuous switching of high-frequency clock signals, which do not carry any information, and hence, their switching is eliminated by a method called clock gating. In this paper, we have incorporated a recent clock-gating style named Leakage Control Transistor (LECTOR)-based clock gating to drive a multi-stage sequential architectures, and we focus on its performance under three different process corners (fast-fast, slow-slow, typical-typical) through Monte Carlo simulation at 18 GHz clock with 90 nm technology. This gating is found to be one of the best gated approaches for multi-stage architectures in terms of total power consumption.