• 한국산업보건학회지
• /
• 제33권1호
• /
• pp.3-5
• /
• 2023

Objective: This study introduces exposure concentrations of time-weighted average standard (TWA) evaluation and short-time exposure standard (STEL) evaluation for trichloroethylene in the cleaning process. Methods: Trichloroethylene measurement was conducted according to the KOSHA Guide (A-24-2019) method. It was carried out twice. Results: As a result of the first measurement, TWA concentration exceeded 4 times the exposure standard and STEL concentration exceeded 16 times, but the inaccuracy and breakthrough of the collection time could not be considered, so the second measurement was conducted. The second measurement result was lower than the first measurement result, but exceeded the exposure standards (TWA, STEL). Conclusions: We were able to confirm that the exposure level of workers in the cleaning process using trichloroethylene exceeded the exposure standard. And it is also considered necessary to grasp the approximate concentration using a detector tube in the preliminary survey.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2004년도 춘계학술대회 논문집
• /
• pp.269-274
• /
• 2004

As next generation display, TFT LCD gets into the spotlight, and the bigger glass size is required. Currently, its display size is 1500 mm by 1870 mm at the six generation comparing with 300mm by 400 mm at the first one and the size is increasing continuously, which cause the difficulties to apply the cleaning operation including the general brush cleaning. In this study, water-jet cleaning operation has been introduced, which spent the less water them other cleaning methods. Throughout the experiment, is has been found the possible damage of the declined cell and the variation of the tilt bias angle depending upon the increasing time. In addition, the simulation predicts the glass bending of the display.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2018년도 추계 학술논문 발표대회
• /
• pp.138-139
• /
• 2018

The purpose of this study is to analyze the work of the existing manpower dependent cleaning method by investigating the window cleaning site. In this study, detailed work contents were confirmed by on-site investigation and interview with experts, and the relationship, procedure, repetition work, and time required for each work were analyzed. The future analysis results will be used as a basic data for comparative analysis of productivity and economical efficiency with the window cleaning device to be developed.

• Agribusiness and Information Management
• /
• 제9권1호
• /
• pp.18-22
• /
• 2017

It takes lots of time and labor if a worker have to measure the water quality at a certain but designated time every day in an un-automated aqua farm. In addition, if the equipment is soaked in the sea water consistently, it will be contaminated by diverse floating matters and barnacles, and it often becomes mal-functional within 2~3 months. Therefore, we need to develop a system with which the sensed data could be checked in real time and operated automatically, while preventing the contamination of the sensor, a crucial component for water quality measuring equipment, as much as possible, and increasing the replacement cycle. We have developed a non-cleaning water quality measuring equipment and its software which are used in the fishery household of offshore aqua farms. By providing the workers with a mobile application which has a function of monitoring the water quality in real time, they can check the situation directly without going to the fishery household.

• Environmental Engineering Research
• /
• 제23권4호
• /
• pp.474-484
• /
• 2018

The cleaning efficiency of reverse osmosis (RO) membranes inevitably fouled by organic foulants depends upon both chemical (type of cleaning agent, concentration of cleaning solution) and physical (cleaning time, flowrate, temperature) parameters. In attempting to determine the optimal procedures for chemical cleaning organic-fouled RO membranes, the design of experiments concept was employed to evaluate key factors and to predict the flux recovery rate (FRR) after chemical cleaning. From experimental results and based on the predicted FRR of cleaning obtained using the Central Composite Design of Minitab 17, a modified regression model equation was established to explain the chemical cleaning efficiency; the resultant regression coefficient ($R^2$) and adjusted $R^2$ were 83.95% and 76.82%, respectively. Then, using the optimized conditions of chemical cleaning derived from the response optimizer tool (cleaning with 0.68 wt% disodium ethylenediaminetetraacetic acid for 20 min at $20^{\circ}C$ with a flowrate of 409 mL/min), a flux recovery of 86.6% was expected. Overall, the results obtained by these experiments confirmed that the equation was adequate for predicting the chemical cleaning efficiency with regards to organic membrane fouling.

• 한국의류학회지
• /
• 제38권6호
• /
• pp.942-952
• /
• 2014

Winter outerwear includes various clothes such as classical jackets/coats, padded jackets/coats, wind breakers, leather and fur jackets/coats. This research surveyed care-label instructions attached to 100 jackets/coats dropped off at five drycleaners in the Gyungin area. University students' perception and attitudes towards care labels and management of winter outerwear were examined using a questionnaire. Data collected from 230 respondents were analyzed by frequency analyses, t-tests, ANOVAs and Duncan tests with PASW 20.0. Half of the padding jackets/coats were labelled to be dry cleaned and dry cleaning was more excessively labelled than necessary. University students confirmed more care symbols than fiber compositions such as more at time of cleaning than at purchasing. Clothing-related major students understood care label symbols better than non-clothing major students. Consumers laundered some winter outerwear at home, even though they thought dry cleaning was a proper cleaning method. The appropriate cleaning method for padded jackets/coats is laundering; however, consumers who answered dry cleaning as an appropriate method were three times as those who answered washing, and those performed dry cleaning were two times as those who performed washing. Winter outerwear manufacturers should provide adequate and more specified care-information to consumers in order to maintain initial appearance and performance over longer periods.

• 한국생산제조학회지
• /
• 제22권4호
• /
• pp.643-651
• /
• 2013

This study applied a laser cleaning method (dry cleaning) that is used for cleaning semiconductor elements to dental implant cleaning. The lasers used in this study were pulsed fiber lasers with wavelengths of 1,064 and 532 nm. The peak output, energy per pulse, energy density per pulse, time of pulse experiment, and number of pulse experiments served as process variables for this study, and the variables were changed for each experiment. As a result, a laser with a wavelength of 532 nm showed much higher cleaning efficiency than its 1,064 nm counterpart. As the wavelength range decreased, the quantized energy increased and the reflection rate of the titanium used for the implant decreased; consequently, the energy absorption rate increased. Therefore, it is proposed that the energy density by wavelength has a greater influence on cleaning than does the output size.

• Restorative Dentistry and Endodontics
• /
• 제47권2호
• /
• pp.21.1-21.11
• /
• 2022

Objectives: This study aimed to investigate the bonding effects of cleaning protocols on dentin impregnated with endodontic sealer residues using ethanol (E) or xylol (X). The effects of dentin acid etching immediately (I) or 7 days (P) after cleaning were also evaluated. For bonding to dentin, universal adhesive (Scotchbond Universal; 3M ESPE) was used. The persistence of sealer residues, hybrid layer formation and microshear bond strength were the performed analysis. Materials and Methods: One hundred and twenty bovine dentin specimens were allocated into 4 groups (n = 10): G1 (E+I); G2 (X+I); G3 (E+P); and G4 (X+P). The persistence of sealer residues was evaluated by SEM. Confocal laser scanning microscopy images were taken to measure the formed hybrid layer using the Image J program. For microshear bond strength, 4 resin composite cylinders were placed over the dentin after the cleaning protocols. ANOVA followed by Tukey test and Kruskal-Wallis followed by Dunn test were used for parametric and non-parametric data, respectively (α = 5%). Results: G2 and G4 groups showed a lower persistence of residues (p < 0.05) and thicker hybrid layer than the other groups (p < 0.05). No bond strength differences among all groups were observed (p > 0.05). Conclusions: Dentin cleaning using xylol, regardless of the time-point of acid etching, provided lower persistence of residues over the surface and thicker hybrid layer. However, the bond strength of the universal adhesive system in etch-and-rinse strategy was not influenced by the cleaning protocols or time-point of acid etching.

• 청정기술
• /
• 제7권4호
• /
• pp.225-242
• /
• 2001

산업체에서 부품을 가공하거나 완성품을 제조하는 과정에서 세정 공정은 필수적으로 사용하고 있고 현재 국내외 대부분의 제조업체에서는 오존파괴물질인 CFC-113이나 1,1,1-TCE 대신에 보다 환경친화적인 수계 세정제로의 대체가 진행중이다. 그러나 수계 세정시스템은 세정공정이나 헹굼공정에서 다량의 물을 사용하기 때문에 많은 폐수를 발생시키는 단점이 있다. 따라서 수계 세정시스템에서는 이러한 발생을 최소화하고 세정액과 헹굼수의 성능을 오랫동안 유지시키기 위한 모니터링 기술과 재활용 기술의 도입이 긴요하다. 본고에서는 수계 세정시스템에 사용하는 세정제와 주요 오염물질인 절삭유를 조사 분석하였고 산업현장에서 도입 가능한 수계 세정시스템의 모니터링 기술과 재활용 기술 등을 분석 평가하였다.

• 공업화학
• /
• 제16권4호
• /
• pp.533-541
• /
• 2005

2,2,2-trifluoroethanol (TFEA)과 hydrofluoroether (HFE)를 혼합하여 비수계 세정제를 제조하고 이들의 혼합비에 따른 물성과 세정성의 영향을 연구하였다. 또한 TFEA를 기초로 하고 비이온 계면활성제, 가용화제와 빌더를 첨가한 수계 세정제를 제조하고 이들의 세정능력을 비교하여 CFC-113, 1,1,1-TCE에 대한 대체 가능성을 평가하였다. 오염 물질로 수용성이거나 친수성, 지용성이거나 친유성인 각기 다른 플럭스, 절삭유, 그리스, 불소계 오일 등을 선정하고, 세정시간에 따른 오염물질의 중량변화를 비교하여 각 세정제의 세정능력을 비교함으로써 대체세정제로서의 TFEA를 기초로 한 세정제의 적용 가능성을 평가하였다. 그 결과 TFEA와 HFE를 주성분으로 하여 제조한 비수계 세정제는 플럭스와 불소계 오염물에 우수한 세정성을 보여주었지만 그리스 세정에서는 세정성이 떨어졌다. 이에 비하여 TFEA를 기초로 하고 비이온 계면활성제, 가용화제, 빌더 등을 첨가하여 제조한 수계세정제는 일정한 배합 조건에서 플럭스와 그리스 제거에 매우 효과적이었다. 따라서 TFEA를 기초로 한 수계 및 비수계 세정제는 특정 오염물질에 대하여 좋은 세정력을 보여 주어 CFC-113, 1,1,1,-TCE 등의 대체세정제로의 가능성을 보여주었다.