• 한국산업보건학회지
• /
• 제18권3호
• /
• pp.189-203
• /
• 2008

Cylindrical bag filter system with pulse jet cleaning has been the most common device to control particle laden exhaust gas from the various industrial processes. But, it has many shortcomings due to particle reattachment and frequent bag rupture. In recent years, rectangular type bag filter system has been developed to overcome the problems associated with the cylindrical system. However, not many studies about the rectangular system were not done, compared to the cylindrical system. In this study, the optimum pulse jet cleaning conditions were thus tested by the series of experiments. The factors tested in this study are pulse distance, pulse pressure, pulse duration, the number of holes for pulsing and bag materials. A single bag ($1,500mmL{\times}50mmW{\times}300mmH$) system and a multi-bags (3 bags in a row) were tested separately. The highest removal efficiency with a single bag system was found at the conditions with pulse distance of 10cm, pulse pressure of $3kg/cm^2$, pulse duration of 0.3s, pulse jet number of 6 and Polyester bag. With the multi-bags system, the best cleaning conditions were found at the bag interval of 20cm with the simultaneous pulsing and the bag interval of 15cm with the serial pulsing.

• 한국대기환경학회지
• /
• 제32권4호
• /
• pp.384-393
• /
• 2016

In this study, two kinds of industrial filter bags were tested for their filtration performance to apply the existing bag filter systems. Experimental variables were examined for pressure drop, cleaning interval, residual pressure drop, cleaning efficiency, fractional grade efficiency, total collection efficiency according to the filter bag structure. According to these results, the filter bags tested in this study demonstrated good performance in dust collection. This was also true for the double surface filter bag. The lifetime was longer than the round type filter bag because the filtration area was more than 1.6 times wider and the filter quality factor was much higher. Therefore, double surface filter bags are suggested to be used in order to increase filtration performance of the bag filter systems.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제18권1호
• /
• pp.66-71
• /
• 2018

Purpose: Performance recovered from SCR through cleaning was studied, measuring differential pressure, NOx reduction efficiency, fuel consumption and engine power before and after cleaning. Ideal cleaning intervals are proposed based on SCR mileage and differential pressure. SCR endurance and reliability improvements through cleaning were studied through physicochemical testing of SCR durability at 43,000km 50,000km, and 110,000km respectively. Methods: Engine power, fuel consumption and exhaust gas were measured using engine full load tests and ND-13 MODE by installing the SCR before cleaned at total engine mileages of 400,000 km, 300,000km and 200,000km. The same tests were performed after cleaning the SCR catalytic converter. Endurance and reliability of the SCR cleaning was studied through the same test by SCR catalyst after each 43,000km 50,000km, 110,000km, durability test on SCR cleaning. Conclusion: We confirmed the low-performance of the SCR due to clogging is restored by SCR cleaning technology. The NOx reduction efficiency was restored to 82%, 86% and 88% from 69%, 72% and 79%. As well as the NOx reduction efficiency, it was confirmed that the engine power, fuel consumption and back pressure was restored to fresh SCR levels. As a result of the durability and reliability achieved through SCR cleaning, we confined the appearance and reduction efficiency through visual inspection and ND-13 MODE are similar to new SCR catalysts. Finally, it was judged that there was no change in performance even when driving the SCR without cleaning throughout the 100,000 km mileage warranty.

• Journal of Advanced Marine Engineering and Technology
• /
• 제36권7호
• /
• pp.894-901
• /
• 2012

For more efficient use of the high pressure water-jet in rehabilitation of the water pipes, we have studied the water-jet cleaning motion of the in-pipe robot with screw drive. The mathematical models of the water-jet in the straight and the curved pipe (90 degrees elbow), representative features of the water mains, were designed to understand the water-jet motion and simulations have been performed. Furthermore the experiments has been conducted to validate the simulations by using the prototype in-pipe robot in the 3-D pipeline. The simulation results show that the water-jet motion in the straight pipe has a constant water-jet interval, whereas the motion in the curved pipe is changed by its position. By the comparison of the simulation and the experimental results, we have demonstrated that the simulations successfully estimate the water-jet motion inside the water pipes. Therefore in-pipe robot operators can predict a water-jet motion for a target water pipe through the simulation and flexibly make a proper water-jet motion by changing the robot configurations before a cleaning work.

• 한국안광학회지
• /
• 제16권4호
• /
• pp.391-401
• /
• 2011

목적: 국내 안경원의 시험착용렌즈와 관리용품의 관리 실태를 조사하고 분석함으로써 관리 소홀로 인하여 유발될 수 있는 사고의 위험성을 낮추고자 하였다. 방법: 콘택트렌즈 착용자들을 대상으로 시험착용렌즈의 착용 시 느끼는 점을 설문 조사하였으며, 콘택트렌즈를 취급하는 안경원의 안경사를 대상으로 시험착용 콘택트렌즈인 미용렌즈와 RGP 렌즈 그리고 렌즈 관리용품의 관리 실태를 설문 조사하였다. 결과: 시험착용 미용렌즈와 RGP 렌즈의 경우는 98% 이상의 안경사들이 렌즈 착용 전후 세척을 실시하고 있기 때문에 소비자들은 렌즈의 위생 상태를 신뢰하고 있는 것으로 나타났다. 시험착용 미용렌즈의 착용 전 세척은 생리식염수 38.5%, 전용 다목적 용액 40.5%, 생리식염수와 다목적 용액의 병행 사용 21%로 이루어지고 있었으며, 착용 후 세척은 생리식염수 13%, 다목적 용액 75%, 생리식염수와 다목적 용액의 병행이 12%로 이루어지고 있었다. 반면 시험착용 RGP 렌즈의 경우는 착용 전 세척에는 생리식염수가 28.5%, 전용 다목적 용액이 38.5%, 식염수와 다목적 용액 병행이 33%로 나타났으며, 착용 후 보관전 세척은 식염수가 2.5%, 다목적 용액이 70%, 다목적 용액 세척 후 식염수 세척은 27.5%를 차지하여 비교적 세척이 잘 이루어지고 있었다. 안경원에서 시험착용 미용렌즈의 세척은 주로 열흘에서 1개월을 주기로 이루어지는 것으로 나타냈고, 보관용기의 세척은 1 개월을 주기로 이루어졌다. 시험착용 RGP 렌즈의 세척주기는 주로 1개월 또는 2~3개월이었다. 시험착용렌즈 보관용기의 경우는 계면활성제를 이용하여 세척한 후 찬물로 헹구는 경우가 75% 이상으로 나타났다. 관리용품인 생리식염수의 보관기간은 주로 일주일로 나타났고, 다목적 용액의 보관기간은 주로 1개월이나 2~3개월로 나타나 안경원에서 렌즈 관리용액의 보관기간은 비교적 잘 지켜지고 있는 것으로 조사되었다. 결론: 안경원에서의 시험착용렌즈 및 관련 관리용품의 관리는 전반적으로 양호하게 이루지고 있었으나 생리식염수를 이용한 세척을 지양하고, 2주 이내의 세척주기와 뜨거운 물로의 렌즈 보관용기 헹굼이 추가적으로 강화된다면 국민의 눈 건강 증진과 더불어 안경사에 대한 더 높은 신뢰성 구축이 가능할 것이다.

• 한국대기환경학회지
• /
• 제24권4호
• /
• pp.483-491
• /
• 2008

The filtration characteristics of $CYBAGFILTER^{(R)}$ unit with pleated filter bags were evaluated by comparing the performance of the unit with the lower part of cyclone shape with that of the unit with conventional lower part. Results from the test were also compared with those from the previous research with the $CYBAGFILTER^{(R)}$ in which round filter bags were installed. $CYBAGFILTER^{(R)}$ is the unit which combines the centrifugal separation mechanism and the fabric filtration mechanism in a single unit for efficient removal of particulate matters. The pleated filter bags are made of pleated fabric with an extension of the filtration area about 3 times compared with the conventional round filter bags. The results from the test using pleated filter bags showed an overall collection efficiency of over 99.9% regardless of the shape of lower part installed. When the lower part of cyclone shape was installed, the filter cleaning interval was over 2 times longer compared with that when the conventional lower part was installed. At the same conditions of filtration velocity and filter pressure drop, the $CYBAGFILTER^{(R)}$ with the lower part of cyclone shape, in which the pleated filter bags are installed, can be operated with a flow rate of round 3 times higher than that with conventional round filter bags.

• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2003년도 기술심포지움 논문집
• /
• pp.151-155
• /
• 2003

The requirements for harsh environment electronic controllers in automotive applications have been steadily becoming more and more stringent. Electronic substrate technologists have been responding to this challenge effectively in an effort to meet the performance, reliability and cost requirements. An effect of the plasma cleaning at the alumina substrate and the IMC layer between $Sn-37wt\%Pb$ solder and Ag-Pd thick film conductor after reflow soldering has been studied. Organic residual carbon layer was removed by the substrate plasma cleaning. So the interfacial adhesive strength was enhanced. As a result of AFM measurement, Ag-Pd conductor pad roughness were increased from 304nm to 330nm. $Cu_6Sn_5$ formed during initial ref]ow process at the interface between TiWN/Cu UBM and solder grew by the succeeding reflow process so the grains had a large diameter and dense interval. A cellular-shaped $Ag_3Sn$ was observed at the interface between Ag-Pd conductor pad and solder. The diameters of the $Ag_3Sn$ grains ranged from about $0.1\~0.6{\mu}m$. And a needle-shaped $Ag_3Sn$ was also observed at the inside of the solder.

• 한국산업보건학회지
• /
• 제18권2호
• /
• pp.149-160
• /
• 2008

Bag-filter system has been widely used in industrial field to remove the particulate matters from the exhaust gas. The cylindrical type of bag-filter has been generally used. But it has many shortcomings. The reattachment of separated particles on the surface of bags could result in high pressure drop of bag-filter system and subsequent decrease of air flow rate since the cylindrical type bag-filter system should have the upward flow pattern. In addition, the supply of very high pressure pulse air jet to remove particulate matters on the surface of filter could result in a frequent rupture of bags. To overcome these shortcomings of the cylindrical type, the rectangular type was developed in the developed countries and imported to Korea. But, there was not many design data available to understand the mechanisms. Thus, the fundamental experiments were conducted in this study to get some ideas about the pulse jet cleaning of rectangular type bag filter system. The experimental factors are as follows; pulse distance, pulse duration, pulse interval, pulse pressure and pulse nozzle type. Experiments followed the factorial design method. With the shorter pulse distance, the distribution of pressure drops was relatively not uniform while the particulate removal efficiency was higher. With the longer duration of pulsing and the more number of pulse nozzle, the removal efficiency was higher and the pressure drop distribution was more uniform.

• 치위생과학회지
• /
• 제17권6호
• /
• pp.508-515
• /
• 2017

본 연구는 건강한 성인 33명을 대상으로 예방관리프로그램의 핵심인 PMTC를 활용하여 구강건강의 변화를 치면세균막지수와 치은염지수를 통하여 관찰하여 최적의 관리주기를 찾아보고자 연구를 실시한 결과, 다음과 같은 결론을 얻었다. 첫째, 주기에 따른 치면세균막관리점수와 치은염지수를 비교한 결과, 4차 방문에서 가장 구강위생관리가 잘되고 있는 것으로 나타났고 치은염지수도 가장 좋게 나타났다(p<0.05). 하지만 3개월 follow-up에서 구강위생상태는 나빠졌다(p<0.05). 그러나 3개월, 6개월 follow-up에서는 1차 방문보다 구강위생이 향상된 상태를 보였다(p<0.05). 이는 매주 반복된 구강위생관리학습에서는 효과를 보였으나 올바른 구강위생관리능력이 배양되지 않은 상태에서 이행된 계속관리주기는 적절하지 못하였다. 하지만 예방관리프로그램의 효과는 있음을 확인할 수 있었고 재교육의 중요성을 인지할 수 있는 결과였다. 둘째, 평균 치은염지수에서 1차 방문부터 3차 방문으로 이행될수록 치은염지수의 차이가 크게 나타났다(p<0.05). 그러나 4차 방문의 치은염지수는 3차 방문보다 개선되지 않은 경향을 보였다(p>0.05). 이는 PMTC를 3회 이상 적용하였을 때 잇몸건강에 효과가 나타남을 알 수 있었다. 셋째, 연구 종료 후 문진 결과, 프로그램 경험에 따른 피험자들의 구강위생상태와 잇몸건강에 영향을 미치는 동기부여방법은 1차 방문에서는 '위상차현미경', follow-up에서는 '평가지수'가 구강위생관리력을 향상시키는 경향을 보였다. 그리고 피험자들의 54.5%가 프로그램 경험 후 1개월 단위를 추천하는 적정 관리주기로 응답하였다. 이상의 결과에서 PMTC 중심의 예방관리프로그램의 운영은 구강위생상태를 개선하는 데 효과가 있었음을 알 수 있었다. 하지만 4차 방문과 계속관리를 비교한 연구결과와 프로그램 경험 후 문진에서 조사된 피험자들의 응답을 통하여 올바른 구강위생관리능력이 배양되지 않은 상태에서의 적정 관리주기는 1개월인 것으로 생각된다. 그리고 예방관리프로그램의 경험에 따른 문진에서 피험자들의 구강위생관리력에 영향을 미치는 동기부여방법으로 위상차현미경과 평가지수가 구강위생관리력을 향상시키는 경향을 보이는 것으로 조사되어 위상차현미경의 사용과 구강위생상태의 평가는 필요하며 평가된 내용을 문자 전송하는 방식의 도입 또한 필요할 것으로 생각된다. 그래서 향후 추가 연구에서는 환자의 특성에 따른 구강위생관리를 위한 태도 변화를 유도하기 위한 학습기간에 대한 연구를 통하여 적정 관리주기에 대한 심도 있는 연구는 필요하리라 생각된다.

• 한국대기환경학회지
• /
• 제20권6호
• /
• pp.739-748
• /
• 2004

A hybrid dust-collector combining a fabric filter with centrifugal force was developed to enhance the performance of the conventional fabric filter systems and its performances were evaluated to compare to that of the existing dust collector. The pressure drop rapidly increased with increasing the elapsed time and the face velocity in two filtration systems. But the increasing ratio of a hybrid dust-collector compare to the existing dust collector was lower. This results were confirmed from the performance such as cleaning interval, residual pressure drop and dust loading rate. The overall collection efficiency of the hybrid dust-collector was more than 99.6% and this showed a improvement of 0.6～2% than that of the existing dust collector. Especially, the fractional collection efficiency at the particle size of around 1${\mu}{\textrm}{m}$ is about 4% higher than that of the existing dust collector.