• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2013년도 춘계 학술논문 발표대회
• /
• pp.249-251
• /
• 2013

The government has applied the Construction New Excellent Technology Endorsement System to enhance national competitiveness and advance domestic construction technology since 1989. Nevertheless, It's application hasn't been expanded to overall construction industry, due to insufficient verification of the cost effectiveness. So, the government has established the standardized cost estimation guideline to verify the cost effectiveness in 2011. This research classified the technology group based on 27 cases of the cost estimation reports to increase understanding of the cost effectiveness of the new excellent technology. It is expected to contribute establishing reasonable and feasible cost estimation standards.

• Journal of Preventive Medicine and Public Health
• /
• 제29권4호
• /
• pp.877-897
• /
• 1996

In recent years, the Korean Medical Association has undertaken the feat of establishing the Korean Standard Terminology of Medical Procedures with the dedicated help of 32 medical academic societies. However, because the project is being conducted by several different circles, it has yet to see a clear system of classification. This thesis, therefore, proposes the three principles of scientific properties, usefulness and ideology as the basis for classification system and has developed the Classification System of Medical Procedures in Korea upon their foundation. The methodology and organization of this thesis as follows. First, by adopting scientific classification system of Feinstein(1988), an analysis of the classification systems of the medical procedures in the United States, Japan, Taiwan, WHO was carried out to reveal the framework and the basic principles in each system. Second, the direction of classification system has been constructed by applying the normative principle of medical field in order to show the future direction of the medical field and realize its ideology. Third, a finalized framework for the classification system will be presented as based on the direction of classification system. Of the three basis principles mentioned above, the analysis on the principles of usefulness was left out of this thesis due to the difficulty of establishing specific standards of analysis. The results of the study are as follows. The overall structure of the thesis is aimed at showing the 'Prevention-Therapy-Rehabilitation' quality of comprehensive health care and consists of six chapters; I. Prevention and Health Promotion II. Evaluation and Management III. Diagnostic Procedures IV. Endoscopy V. Therapeutic Procedures VI. Rehabilitation Chapter three Diagnostic Procedures is divided into four parts : Functional Diagnosis, Visual Diagnosis, Pathological Diagnosis, Biopsy and Sampling. Chapter five Therapeutic Procedures is divided into Psychiatry, Non-Invasive Therapy, Invasive Therapy, Anaesthesia and Radiation Oncology. Of these sub-divisions, Functional Diagnosis, Biopsy and Sampling, Endoscopy and Invasive Therapy employs the anatomical system of classification. On the other hand, Visual Diagnosis, Pathological Diagnosis, Anesthesia and Diagnostic Radiology, namely those divisions in which there is little or no overlapping in services with other divisions, used the classification system of its own division. The classification system introduced in this thesis can be further supplemented through the use of the cluster analysis by incorporating the advice and assistance of other specialists.

• 한국실내디자인학회논문집
• /
• 제15권2호
• /
• pp.138-149
• /
• 2006

A museum's collections is fundamental factors to construct important activity of museum performing a role as cultural facility for learning, education and research. Therefore, conservation of collections through appropriate environments is previously established in step of planing a museum. Hereby, the purpose of this study is to set up the classification of collections and suggest a useful guidance of the storage division in a domestic museum. The results of this study are as follows. First, the main factors of deterioration are temperature and relative humidity in a museum storage, so classification of collections should be set up according to the objective standards of these factors. Second, the classification of collections can be performed as follow: the group for nonorganic materials subdivide metal, chinaware, earthenware, and jade stone, the group for organic materials subdivide leather hair paper fabric, bone horn shell mound and wood herbage and the group for composed materials. Third, for storage division of a domestic museum, basically has to consider that it is reasonable to plan $4{\sim}5$ storages in metal, jade stone, chinaware earthenware, and organic materials of $1{\sim}2$ units in case of a serial of history like archaeological, antique museum. And in case of folk relics of modern and contemporary arts are collected, it is reasonable to plan over 5 storages add composed materials to foregoing classification.

• 소프트웨어공학소사이어티 논문지
• /
• 제29권1호
• /
• pp.7-12
• /
• 2020

최근 기능 안전에 대한 관심이 높아짐에 따라 다양한 산업 분야에서 기능 안전 표준의 적용이 요구되고 있다. 기능 안전 표준은 시스템의 오작동을 방지하기 위해 필요한 기능 안전 관련 활동들을 정의한 문서이다. 이 표준에 정의된 모든 활동들은 시스템의 위험 분석 및 평가를 통해 산출된 등급 분류 결과에 따라 차등적으로 요구된다. 국내 무기체계 분야에는 방위사업청에서 발간한 무기체계 소프트웨어 개발 및 관리 매뉴얼이 존재한다. 이 매뉴얼은 기능 안전 관련 활동으로 소프트웨어 정적 및 동적 분석 활동을 요구한다. 하지만 해당 매뉴얼에는 선행 활동으로 요구되는 위험 분석 및 평가를 통한 등급 분류 활동 관련 내용이 구체적으로 언급되고 있지 않다. 따라서 본 연구에서는 대표적인 기능 안전 표준들을 기반으로 무기체계 소프트웨어 개발 및 관리 매뉴얼의 문제점을 분석하고 이에 대한 개선 방안을 제시하도록 한다.

• 기록학연구
• /
• 제50호
• /
• pp.273-309
• /
• 2016

서울시는 다른 기관과 달리 기능분류시스템 구축과 업무관리시스템 도입 사이에 3년의 시간차가 발생하여 기능분류체계의 현행관리가 되지 못했고, 이것은 기록관리기준표를 수립하지 못하는 문제로 이어졌다. 2012년 9월 서울시는 기록관리와 정보공개를 전담하는 정보공개정책과의 신설을 통해 기능분류시스템과 기록관리기준표의 운영부서를 통합하였다. 이를 계기로 2013~2014년 2년에 걸쳐 'BRM 및 기록관리기준표 정비사업(이하 BRM 정비사업)'을 추진하게 되었다. 본 연구는 서울시 사례를 중심으로 BRM 정비를 통한 기록관리기준표 개선사례를 소개하고자 한다. 서울시 BRM 정비사업은 업무담당자의 부담과 업무관리시스템의 운영공백을 최소화하기 위한 정비방법론을 수립하였다. 업무관리시스템 도입 후 분류체계를 정비하는 선례가 없는 상황에서 관련부서와의 긴밀한 협의를 통해 독자적인 절차를 개발하고 정비결과를 시스템에 탑재하였다. 또한 BRM 정비사업을 성공적으로 수행하고 향후 안정적인 운영을 위해 BRM 부서관리자를 대상으로 정비 전 후 2차례에 걸쳐 교육을 진행하였고, 정비사업 기간 동안 뉴스레터를 배포하여 전 직원들의 적극적인 참여를 유도하고 기록관리 인식을 높이기 위해 노력하였다. 뿐만 아니라 정비성과를 유지하고 향후 BRM의 체계적인 관리를 위해 기록관리시스템에 단위과제 현황기능 개발, 업무관리시스템에 과제관리 기능 보완, BRM 목적별 분류체계를 서울시 정보소통광장의 서비스에 적용하는 등 여러 개선사항을 마련하였다. 본 연구가 새롭게 BRM을 도입하려는 기관 또는 분류체계 정비사업을 준비하는 기관에서 시행착오를 줄이는데 참고사례가 될 수 있기를 바란다.

• 한국농공학회논문집
• /
• 제61권3호
• /
• pp.67-76
• /
• 2019

The objectives of this study were to analyze trends of water pollutants and to evaluate the achievement of water quality standards by subbasins in the Han River. The trends of 40 water pollutants at 232 water quality measurement points were analyzed. Chemical oxygen demand (COD), Total organic carbon (TOC), Total coliforms (TC), et cetera were found to be worsening trend. For evaluation of achievement, we evaluated water quality arithmetic mean with river environment standards and human health standards at representative points of the subbasin. Biochemical oxygen demand (BOD), TOC, Total phosphorus (T-P), Fecal coliforms (FC), TC exceeded water quality standards, and water quality of human health standards was all satisfied. So, we prioritized pollutants. If pollutants exceed water quality standards or were worse, they were classified first pollutants. Although BOD and T-P are first pollutants because of water quality standards excess, they are continuously improved. Also, it is better to maintain current status because water quality management system of BOD and T-P is well prepared. Meanwhile, TOC, TC, and FC exceed water quality standards. Furthermore, they were worse gradually, but there is a lack of management systems such as water quality standards of the effluence facilities. Therefore, it is necessary to supplement the system. The results of this study can be used as primary data for the establishment of water quality standards and selection of management pollutants.

• 산업경영시스템학회지
• /
• 제18권35호
• /
• pp.17-24
• /
• 1995

The classification of quality costs by item is essencial to sum up the entire quality cost but the reality of classifying the quality cost by the firm is facing with difficulty in terms of grouping the concerned items. Meanwhile, the classification of items and calculating method of quality costs should be prepared in adcance with a certain standards and or regulations to figure out the accurate quality costs successfuly. This case study provides the contents of quality costs calulated by item and the method of calculation in detail which is applicable to automobile component industry md, also introduce how to set up the computing system of quality costs.

• 한국실내디자인학회논문집
• /
• 제22권1호
• /
• pp.211-221
• /
• 2013

As the result of investigating domestic interior design (interior architecture) field-related laws, it was found that interior design (interior architecture) is not recognized as in independent area due to weak classification standards by Korean standard industrial classification and job classification. Korean standard industrial classification is applied as a standard setting limits to applicable targets and industrial fields for laws related to general administration and industrial policy other than various statistic purposes. Also, the standard industrial classifications regarding the industry field determines the laws or applicable tax rates, government support and such according to the classification, and thus is very important. Moreover, interior architecture field is largely different from general architecture due to specialization and distinct characteristics, but due to the comprehensive concept of architecture industry regulations, it is considered the proper assessment for the professionalism is not conducted. Also, interior architecture field has irrational contradictions that is not independent with a clear definition and industry field classification not only in legal system and trade customs. Therefore, The following is proposed as the plan to strengthen the domestic/international competitiveness and system improvements for interior architecture. (1)interior design (interior architecture) must be amended as an industrial classification that can coexist with architecture. (2)interior design (interior architecture) must be amended as a job classification that can coexist with architecture. (3)Among the design tasks of an architect, approval for the design task field of interior architecture field must be legislated. -In architect design standard contract (the existing architecture design task scope and quality standard table) of a structure, among the tasks by request of the owner, (1)interior design tasks shall be legislated. It should be legislated so that interior design (interior architecture) majors can be included as well. (4)The task field of interior design that coexists with design must be amended. (5)National contract law - among contract method by negotiation, specialty item must be vitalized.

• 한국철도학회논문집
• /
• 제9권5호
• /
• pp.539-543
• /
• 2006

We need to make the standards of maintenance information for urban transit to reduce the cost to maintain the information and to share the information with maintenance workers. It is enable to do systematic maintenance for urban transit by using the information system based on the standardized information. In this paper we propose the major items to standardize and the methods to lay out the standard schemes to enable structured maintenance. We present the 4 items, bill of material, material classification, accident/fault classification, electronic document, to standardize. And we propose how to implement the information system for urban transit based on the standardized information. We describe the implemented information system in two parts; a rolling-stock and an infrastructure part. And also we describe the result of survey to evaluate the system installed at Seoul Metro and Seoul Metropolitan Rapid Transit.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2007년도 춘계학술대회
• /
• pp.449-456
• /
• 2007

This paper presents system of physical distribution module, and classification of logistics equipments. This study also introduces equipment standards of logistics facilities, and environmental rules for distribution center. Moreover, this paper shows safety standard and marking for logistics equipments and tools.