• 제목/요약/키워드: Clark Model

검색결과 104건 처리시간 0.023초

Gamma분포형 함수 적합을 이용한 Clark 모형의 매개변수 간접추정 (An Indirect Approach Determining Parameters of Clark's Model Based on Model Fitting to the Gamma Distribution function)

  • 성기원
    • 한국수자원학회논문집
    • /
    • 제36권2호
    • /
    • pp.223-235
    • /
    • 2003
  • Clark 모형의 매개변수 추정방법을 개선하기 위하여, 순간단위도를 gamma 분포형 함수로 가정하여 매개변수를 추정한 후 이를 Clark 모형의 매개변수로 전환하는 간접 추정방법을 제안하였다. 이 방법은 전통적인 Clark 모형의 매개변수 추정방법의 개연적인 부정확성을 개선하는 특징과 더불어 Nash 모형과의 상관성을 파악할 수 있는 장점을 갖고 있다. 제안된 매개변수 추정방법을 위천 유역에 적용한 결과 만족할 수 있는 수준의 추정값을 얻을 수 있었으며 또한 유역의 도달시간-유하면적 관계를 나타내는 합성함수를 구축할 수 있었다. 또한 제안된 매개변수 추정방법은 미계측 유역에 대한 추정에 있어서도 높은 적용성을 보였다. 따라서 제안된 방법론은 기존의 매개변수 추정방법을 보조할 수 있는 충분한 대안으로 판단된다.

유역의 상사성을 이용한 Clark 모형의 매개변수 해석 (Analysis of the Clark Model Using the Similarity Characteristics of the Basin)

  • 성기원
    • 한국수자원학회논문집
    • /
    • 제32권4호
    • /
    • pp.427-435
    • /
    • 1999
  • Clark 모형은 홍수수문학에서 널리 이용되는 합성단위유량도 추정을 위한 모형이다. 본 연구에서는 미계측유역에 Clark 모형을 적용하기 위한 매개변수 추정기법을 고안하여 적용하였다. 모형의 시간-면적유하곡선은 해석적인 방법으로 유도하였으며 모형을 무차원화 하였다. 도달시간의 계산을 위하여 지형학적 자기상사성을 이용한 공식을 적용하였으며 저류상수는 유역의 시간특성의 상사성 공식을 이용하여 추정하였다. 제안된 모형의 타당성을 검토하기 위하여 동곡의 실측자료와 모형의 결과를 비교한 결과 비교적 잘 일치되는 경향을 보여주었다.

  • PDF

Clark 단위도의 저류상수산정방법의 개선 (Improvement of the storage coefficient estimating mehod for the clark model)

  • 윤태훈;박진원
    • 한국수자원학회:학술대회논문집
    • /
    • 한국수자원학회 2002년도 학술발표회 논문집(II)
    • /
    • pp.1334-1339
    • /
    • 2002
  • 본 연구는 국내의 중소하천유역의 설계홍수량 산정을 위해 사용되고 있는 Clark 모형의 저류상수륵 실무자들이 쉽게 이용할 수 있도록 하는 데 목적이 있다. 이를 위해 과거의 강우-유출자료와 단위도를 바탕으로 대표단위도를 유도하고, 수문곡선 감수분석 개넘을 이용하여 Clark 모형의 저류상수를 산정하였다. 저류상수(K)는 Clark 방법의 매개변수 중 계획홍수량에 가장 큰 영향을 주는 인자이다. 따라서 본 연구에서는 실측자료가 없는 유역에서의 K값의 산정을 위해 유역면적, 주유로연장, 유역경사를 이용한 다중 회귀방정식을 제시하였다. 회귀분석결과 저류상수(k)는 지형학적 동질성이 있는 유역에서 뛰어난 상관관계를 나타내었으며 이를 이용하여 한강, 낙동강, 영산강, 금강, 섬진강 유역의 K에 대한 회귀분석식을 도출하였다.

  • PDF

ModClark 모형을 이용한 유출 해석 (Runoff Analysis using ModClark Model)

  • 안상진;윤석환
    • 한국수자원학회논문집
    • /
    • 제38권3호
    • /
    • pp.245-257
    • /
    • 2005
  • 본 연구에서는 격자로 분할된 유역에 ModClark 모형을 적용하여 수문모형의 매개변수를 산정하고 격자분할에 따른 유출변화에 대해서 검토하였다. 연구대상 유역은 IHP (국제수문개발계획)의 대표유역의 하나인 금강수계의 보청천 유역으로 하였다. 유역의 수문지형정보들은 HEC-GeoHMS를 이용하여 계산하였다. ModClark 모형은 격자형태의 강우자료를 요구하며 이 자료들은 HEC-DSS 파일 형태로 기록되어져 있어야 한다. 따라서 크리깅 방법을 이용하여 지점우량을 전체유역에 대한 격자 강우를 생성하였으며, Hec-DSSVue 프로그램을 이용하여 강우 입력자료를 DSS 파일로 생성하였다. 격자 크기 10000m, 5000m, 2000m 및 1000m에 대한 3가지 유출사상에 대해 모의하였으며, 모의 결과 첨두 홍수량, 유출체적, 첨두홍수 도달시간에 대해 실측수문곡선과 비교적 양호한 결과를 나타내었다.

공간 분포된 강우를 사용한 유출 매개변수 추정 및 강우오차가 유출계산에 미치는 영향분석 (A Runoff Parameter Estimation Using Spatially Distributed Rainfall and an Analysis of the Effect of Rainfall Errors on Runoff Computation)

  • 윤용남;김중훈;유철상;김상단
    • 한국수자원학회논문집
    • /
    • 제35권1호
    • /
    • pp.1-12
    • /
    • 2002
  • 본 연구에서는 공간적으로 분포된 강우자료를 바탕으로 한 강우유출관계를 고찰하고, 기존의 공간 평균된 강우유출모형과 비교하여 유역을 공간 평균함으로써 내재되는 불확실성을 분석하여 이를 정량화시킬 수 있는 방법을 모색하였다. 과거 관측된 호우사상을 단순 크리깅 기법을 이용하여 공간적으로 분포된 강우자료를 구축하였다. 공간 분포된 강우와 공간평균강우의 유출을 비교하기 위하여 공간 분포된 강우를 수정 Clark 방법에 의해서 유출계산을 수행한 결과와 지점 강우자료를 추출하여 티센 평균한 공간평균강우를 Clark방법에 의해서 유출 계산한 결과를 서로 비교하였다. 또한 강우의 관측오차와 이로부터 발생되는 유출오차를 정의한 후, 강우관측소의 밀도를 다양하게 변화시켜가며 모의하여 강우의 관측오차가 유출해석에 미치는 영향을 분석하였다. 본 연구결과 다음과 같은 결론을 도출하였다. 1) 공간 분포된 강우자료가 이용될 경우 기존에 추정된 Clark방법 유출 매개변수의 사용이 가능할 것으로 판단된다. 2) 수정 Clark 방법의 경우는 강우는 공간적인 변동성을 고려한 유출 계산이 가능하기 때문에 이에 대한 불확실성이 일부 제거된 상태에서 매개변수 추정이 가능하게 되며, 따라서 전통적인 Clark방법의 경우보다 인정적인 매개변수를 추정할수 있을 것으로 판단된다. 3) 강우오차 및 유출오차는 강우관측소의 밀도가 높아짐에 따라 지수함수적으로 감소하고 있으며, 오차의 범위 또한 밀도가 증가할수록 평균오차 주위로 수렴하는 것으로 보여진다. 4) 강우오차는 강우관측소의 밀도가 작을수록 유출에 보다 큰 영향력을 미치고 있음을 알 수 있었다.

강우-유출 자료에 의한 Clark 모형의 저류상수 결정 (Determination of the Storage Constant for the Clark Model by based on the Observed Rainfall-Runoff Data)

  • 안태진;최광훈
    • 한국수자원학회:학술대회논문집
    • /
    • 한국수자원학회 2007년도 학술발표회 논문집
    • /
    • pp.1454-1458
    • /
    • 2007
  • The determination of feasible design flood is the most important to control flood damage in river management. Model parameters should be calibrated using observed discharge but due to deficiency of observed data the parameters have been adopted by engineer's empirical sense. Storage constant in the Clark unit hydrograph method mainly affects magnitude of peak flood. This study is to estimate the storage constant based on the observed rainfall-runoff data at the three stage stations in the Imjin river basin and the three stage stations in the Ansung river basin. In this study four methods have been proposed to estimate the storage constant from observed rainfall-runoff data. The HEC-HMS model has been adopted to execute the sensitivity of storage constant. A criteria has been proposed to determine storage constant based on the results of the observed hydrograph and the HEC-HMS model.

  • PDF

강우 유출사상을 통한 Clark 모형의 매개변수 평가 (Estimation of the Parameters for the Clark Model through the Rainfall-Runoff Events)

  • 안태진;백천우;김민혁;최광훈;강인웅
    • 한국수자원학회:학술대회논문집
    • /
    • 한국수자원학회 2006년도 학술발표회 논문집
    • /
    • pp.770-774
    • /
    • 2006
  • The determination of feasible design flood is the most important to control flood damage in river management. Model parameters should be calibrated using observed discharge but due to deficiency of observed data the parameters have been adopted by engineer's empirical sense. Storage coefficient in the Clark unit hydrograph method mainly affects magnitude of peak flood. This study is to estimate the storage coefficients based on the observed rainfall-runoff events at the four stage stations in the Hantan river basin. Model calibration is the process of adjusting model parameter values until model results match historical data. An objective function which is the percent difference between the observed and computed peak flows is available for measuring the goodness-of-fit between computed and observed hydrographs. By sensitivity analysis for the storage coefficient, it has been shown that the storage coefficients affect the peak flows. The Clark parameters adopted in the River Rectification Basic Plan have been estimated through an iterative process designed to produce a hydrograph with the peak flow.

  • PDF

HEC-1 모형의 유역특성변화에 따른 설계 홍수량의 비교 분석 (Anlaysis of Design flood in a relation to Changing Characteristics of Area by using HEC-1 Model)

  • 김선주;김필식
    • 한국농공학회:학술대회논문집
    • /
    • 한국농공학회 1999년도 Proceedings of the 1999 Annual Conference The Korean Society of Agricutural Engineers
    • /
    • pp.537-543
    • /
    • 1999
  • While there are to estimating design discharge , we are in trouble with how to separate area, Because discharges will be different depending on the shape of area even though there are same size of area . This study is for a reasonable presentation of design discharge method where there are changing characteristcs of area with SCS and Clark theory by sung HEC-1 Model. While we were Estimating desgin discharge with separating area in a relation to Time of Concentration(Tc) with SCS , Clark method, we found that if there are no variation of Tc the value of a discharge is not changed where shapes of area are different though. And from the result of analysis with SCS and Clark method, we ascertained that discharge by the SCS method was more bigger than that of the Clark where Area is less than 100ha. On the other hand, Clark method is more bigger in the more 1000ha.

  • PDF

선형 이산화 입력-출력 모형의 매개변수 결정에 관한 연구 (Estimation of Parameters of the Linear, Discrete, Input-Output Model)

  • 강주복;강인식
    • 한국환경과학회지
    • /
    • 제2권3호
    • /
    • pp.193-199
    • /
    • 1993
  • This study has two objectives. One is developing the runoff model for Hoe-Dong Reservoir basin located at the upstream of Su-Young River in Pusan. To develop the runoff model, basic hydrological parameters - curve number to find effective rainfall, and storage coefficient, etc. - should be estimated. In this study, the effective rainfall was calculated by the SCS method, and the storage coefficient used in the Clark watershed routing was cited from the report of P.E.B. The other is the derivation of transfer function for Hoe-Dong Reservoir basin. The linear, discrete, input-output model which contained six parameters was selected, and the parameters were estimated by the least square method and the correlation function method, respectively. Throughout this study, rainfall and flood discharge data were based on the field observation in 1981.8.22 - 8.23 (typhoon Gladys). It was observed that the Clark watershed routing regenerated the flood hydrograph of typhoon Gladys very well, and this fact showed that the estimated hydrological parameters were relatively correct. Also, the calculated hydrograph by the linear, discrete, input-output model showed good agreement with the regenerated hydrograph at Hoe-Dong Dam site, so this model can be applicable to other small urban areas. Key Words : runoff, effective rainfall, SCS method, clark watershed iou상ng, hydrological parameters, parameter estimation, least square method, correlation function method, input-output model, typhoon gladys.

  • PDF