• Structural Engineering and Mechanics
• /
• v.62 no.6
• /
• pp.675-693
• /
• 2017

In this paper, based on the first-order shear deformation plate theory, buckling analysis of piezoelectric coupled transversely isotropic rectangular plates is investigated. By assuming the transverse distribution of electric potential to be a combination of a parabolic and a linear function of thickness coordinate, the equilibrium equations for buckling analysis of plate with surface bonded piezoelectric layers are established. The Maxwell's equation and all boundary conditions including the conditions on the top and bottom surfaces of the plate for closed and open circuited are satisfied. The analytical solution is obtained for Levy type of boundary conditions. The accurate buckling load of laminated plate is presented for both open and closed circuit conditions. From the numerical results it is found that, the critical buckling load for open circuit is more than that of closed circuit in all boundary and loading conditions. Furthermore, the critical buckling loads and the buckling mode number increase by increasing the thickness of piezoelectric layers for both open and closed circuit conditions.

• Proceedings of the KIEE Conference
• /
• 2001.07b
• /
• pp.1026-1028
• /
• 2001

In this paper, proposal circuit proposes that load parallel resonant DC-DC Converter consist of L and C resonant tank circuit. Also, the capacitor$(C_1,\;C2)$ connected in switch are a common using by resonance capacitor and ZVS capacitor. The analysis of proposed circuit uses normalized parameter and characteristic estimation which is needed in each step before design is generally described the proposed circuit with the characteristics of average power and average output voltage etc. Alse, we conform a rightfulness theoretical analysis by comparing a theoretical values and experimental values obtained from experiment using MOSFET as switching devices.

• Journal of Sensor Science and Technology
• /
• v.21 no.5
• /
• pp.389-393
• /
• 2012

A chaotic oscillator with light controllability was designed. The proposed chaotic oscillator consists of a photo sensor, two phase clock driven MOS switches, nonlinear function blocks for chaotic signal generation. SPICE circuit analysis using a 0.35 um CMOS process parameters was performed for its chaotic dynamics. And we confirmed that chaotic behaviors of the circuit can be controlled according to light intensity. By SPICE simulation, chaotic dynamics by time waveforms, frequency analysis was analyzed. SPICE results showed that proposed circuit can make various light-controlled chaotic signals.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.55 no.3
• /
• pp.123-130
• /
• 2006

This paper presents characteristics analysis of skewed Synchronous Reluctance Motor using equivalent magnetic circuit and compares with the result of Finite Element Method. Torque ripple must be reduced, because it is producing noise and vibration. There is many kinds of method to reduce torque ripple, but generally we apply skewing stator or rotor. The 2D Finite Element Method(FEM) or 3D FEM is used to analyze the motor, since skew influence the average torque in the motor. However, the FEM takes much time in spite of the advanced computer and numerical technique. This paper will analyze characteristics of skewed synchronous reluctance motor using equivalent magnetic circuit.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• v.11B no.2
• /
• pp.15-21
• /
• 2001

This paper presents an improved characteristic analysis methodology for a 5-phase hybrid stepping motor. The basic approach is based on the use of equivalent magnetic circuit taking into account the localized saturation throughout the hybrid stepping motor. The finite element method(FEM) is used to generate the magnetic circuit parameters for the complex stator and rotor teeth and airgap considering the saturation effects in tooth and poles. In addition, the neural network is used to map a change of parameters and predicts their approximation. Therefore, the proposed method efficiently improves the accuracy of analysis by using the parameter characterizing localized saturation effects and reduces the computational time by using the neural network. An improved circuit model of 5-phase hybrid stepping motor is presented and its application is provided to demonstrate the effectiveness of the proposed method.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.11 no.6
• /
• pp.489-493
• /
• 2006

The aim of the paper is to design the PLS(Plasma Lighting System) driving inverter circuit with optimal efficiency. In general, it is known that the PLS driven by a pulse has a higher light-conversion efficiency. There are the Class-E type resonant inverter and the semi-bridge inverter as a circuit which can make a pulse with low duty ratio. In this paper, we analyze the losses of the above two circuits. To verify the loss analysis, the inverter circuit with 220V 380W input consumption is manufactured and tested. Throughout the experimental results, the high efficiency PLS system has confirmed.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.2
• /
• pp.726-732
• /
• 2014

A current flowing through a distribution conductor produces induced voltage, which is harmful to a telecommunication line. Previous research on induced voltage has been focused on single-circuit lines in the distribution system. However, the double-circuit lines, referred to as parallel distribution lines, are widely used in distribution systems because they have significant economic and environmental advantages over single-circuit lines. Therefore, a study on the induced voltage in double-circuit lines is needed. This paper presents a method of calculating the induced voltage in a parallel distribution system using four-terminal parameters and vector analysis. The calculation method is verified by the Electromagnetic Transient Program (EMTP) simulation.

• Proceedings of the KIEE Conference
• /
• 1995.07a
• /
• pp.36-38
• /
• 1995

AC servo motors are widely used for various mechatronic devices such as FA, OA and robot machines. To obtain more accurate simulation results, a method of analysis for AC servo motor is described using transient magnetic formulation coupled with external circuit equation of the motor. The external circuit of the motor to be analyzed is described using FLUX2D program and linked to multiple finite element regions. The simulation results show that transient magnetic analysis coupled with extenal circuit has more accurate than those results from magnetostatic.

• International Journal of Railway
• /
• v.3 no.1
• /
• pp.14-18
• /
• 2010

This paper describes design and characteristic analysis of long primary type linear synchronous motor (LSM) for high speed train system. LSM is designed using loading distribution method and magnetic equivalent circuit. For characteristic analysis of LSM, analytical and numerical methods are applied. Analytical method for solving the magnetic field distribution of the analytic model is based on the Maxwell’s equations. Using the characteristic equation and magnetic equivalent circuit, we analyze the effect of variation of parameters, and then we validate the result by comparing with numerical method by finite element method (FEM). We compare the analytical method with numerical method for analyzing the effect by variable parameters. This result will be useful of design and forecast of performance without FEM.

• 전기의세계
• /
• v.31 no.2
• /
• pp.126-131
• /
• 1982

Induction motors are known to cause voltage dip, oscillating torque and inrush current on the dynamic period. To compensate for these undesirable effects, the prediction of dynamic performances is required. The dynamic performances are determinated by circuit time constants. From this point of view, in this paper, the dynamic equivalent circuit included only three time-constant parameters are presented. To predict more simply dynamic performances, the new characteristics time constant parameters are analyzed, and now these parameters are described as the function of circuit time constants. This paper reviews and analyzes the use of series capacitance compensations, and the use of this analysis can make simply a prediction about oscillating conditions.