• Journal of Power Electronics
• /
• 제11권5호
• /
• pp.719-725
• /
• 2011

This paper describes a novel Direct Torque Control (DTC) method for adjustable speed Doubly-Fed Induction Machine (DFIM) drives which is supplied by a two-level Space Vector Modulation (SVM) voltage source inverter (DTC-SVM) in the rotor circuit. The inverter reference voltage vector is obtained by using input-output feedback linearization control and a DFIM model in the stator a-b axes reference frame with stator currents and rotor fluxes as state variables. Moreover, to make this nonlinear controller stable and robust to most varying electrical parameter uncertainties, a two layer recurrent Artificial Neural Network (ANN) is used to estimate a certain function which shows the machine lumped uncertainty. The overall system stability is proved by the Lyapunov theorem. It is shown that the torque and flux tracking errors as well as the updated weights of the ANN are uniformly ultimately bounded. Finally, effectiveness of the proposed control approach is shown by computer simulation results.

• Smart Structures and Systems
• /
• 제19권1호
• /
• pp.67-90
• /
• 2017

The interdisciplinary research area of small scale energy harvesting has attracted tremendous interests in the past decades, with a goal of ultimately realizing self-powered electronic systems. Among the various available ambient energy sources which can be converted into electricity, wind energy is a most promising and ubiquitous source in both outdoor and indoor environments. Significant research outcomes have been produced on small scale wind energy harvesting in the literature, mostly based on piezoelectric conversion. Especially, modeling methods of wind energy harvesting techniques plays a greatly important role in accurate performance evaluations as well as efficient parameter optimizations. The purpose of this paper is to present a guideline on the modeling methods of small-scale wind energy harvesters. The mechanisms and characteristics of different types of aeroelastic instabilities are presented first, including the vortex-induced vibration, galloping, flutter, wake galloping and turbulence-induced vibration. Next, the modeling methods are reviewed in detail, which are classified into three categories: the mathematical modeling method, the equivalent circuit modeling method, and the computational fluid dynamics (CFD) method. This paper aims to provide useful guidance to researchers from various disciplines when they want to develop and model a multi-way coupled wind piezoelectric energy harvester.

• Nuclear Engineering and Technology
• /
• 제54권9호
• /
• pp.3567-3579
• /
• 2022

This paper provides an assessment of fluid transport and mixing processes inside the primary circuit of the test facility ROCOM through the numerical simulation of Test 2.1 with the system code ATHLET. The experiment represents an asymmetric injection of cold and non-borated water into the reactor coolant system (RCS) of a pressurized water reactor (PWR) to restore core cooling, an emergency procedure which may subsequently trigger a core re-criticality. The injection takes place at low velocity under single-phase subcooled conditions and presents a major challenge for the simulation in lumped parameter codes, due to multidimensional effects in horizontal piping and vessel arising from density gradients and gravity forces. Aiming at further validating ATHLET 3-D capabilities against horizontal geometries, the experiment conditions are applied to a ROCOM model, which includes a newly developed horizontal pipe object to enhance code prediction inside coolant loops. The obtained results show code strong simulation capabilities to represent multidimensional flows. Enhanced prediction is observed at the vessel inlet compared to traditional 1-D approach, whereas mixing overprediction from the descending denser plume is observed at the upper-half downcomer region, which leads to eventual deviations at the core inlet.

• Journal of Power Electronics
• /
• 제13권4호
• /
• pp.679-691
• /
• 2013

High-power electromagnetic transmitter power supplies are an important part of deep geophysical exploration equipment. This is especially true in complex environments, where the ability to produce a highly accurate and stable output and safety through redundancy have become the key issues in the design of high-power electromagnetic transmitter power supplies. To solve these issues, a high-frequency switching power cascade based emission power supply is designed. By combining the circuit averaged model and the equivalent controlled source method, a modular mathematical model is established with the on-state loss and transformer induction loss being taken into account. A triple-loop control including an inner current loop, an outer voltage loop and a load current forward feedback, and a digitalized voltage/current sharing control method are proposed for the realization of the rapid, stable and highly accurate output of the system. By using a new algorithm referred to as GAPSO, which integrates a genetic algorithm and a particle swarm algorithm, the parameters of the controller are tuned. A multi-module cascade helps to achieve system redundancy. A simulation analysis of the open-loop system proves the accuracy of the established system and provides a better reflection of the characteristics of the power supply. A parameter tuning simulation proves the effectiveness of the GAPSO algorithm. A closed-loop simulation of the system and field geological exploration experiments demonstrate the effectiveness of the control method. This ensures both the system's excellent stability and the output's accuracy. It also ensures the accuracy of the established mathematical model as well as its ability to meet the requirements of practical field deep exploration.

• 한국전자파학회논문지
• /
• 제24권6호
• /
• pp.633-643
• /
• 2013

IC 내부의 전원분배망(PDN: Power Delivery Network) 회로를 분석하기 위해서는 IC의 디자인 정보가 담긴 파일이 필요하지만, 상용 IC(Commercial IC)의 경우 보안상의 이유로 디자인 정보를 제공하지 않고 있다. 하지만 온-칩 전원분배망(On-chip PDN) 특성이 포함된 경우에는 PCB와 패키지의 특성만으로는 정확한 해석이 어려우므로 본 연구에서는 IC 내부의 정보가 제공하지 않는 전원분배망(PDN) 회로의 추출에 관하여 연구를 하였다. IC 내부의 전원분배망(PDN)의 주파수에 대한 특성을 추출하기 위하여, IEC62014-3에서 제안하고 있는 추출용 보드를 제작하였고, 추출용 보드를 구성하고 있는 SMA 커넥터, 패드, 전송 선로, 그리고 QFN 패키지의 주파수에 대한 특성들을 분석하였다. 추출된 결과들은 디임베딩(de-embedding) 기술에 적용하여 IC 내부의 전원분배망(PDN) 회로를 S-parameter 기반으로 모델을 추출하였고, 평가용 보드의 전원분배망 결합회로(PDN Co-simulation)모델에 적용하여 측정과 비교한 결과, ~4 GHz까지 잘 일치하였다.

• 한국전자파학회논문지
• /
• 제16권5호
• /
• pp.482-487
• /
• 2005

본 연구에서는 distributed amplifer를 구성하는 cascode 단위이득단의 공통게이트의 게이트 단자에 가변 커패시터를 연결함으로써 출력 저항 값을 조절하는 방법을 제안한다. Cascode 이득단은 공통 소스 이득단에 비해 높은 이득, 높은 출력저항, 부성저항을 제공하는 등 여러 장점이 있지만 설계시 사용한 트랜지스터 모델이 부정확하고 공정변수가 달라진다면 이득이 떨어지기 시작하는 band edge에서 발진할 위험이 있다. 그러므로 회로가 제작된 이후에도 발진을 막을 수 있는 조절회로가 필요하게 되는데, cascode단위 이득단의 공통 게이트 단자에 연결된 가변 커패시터가 그 역할을 할 수 있다. 제작한 distributed amplifier를 측정해본 결과 가변 커패시터를 조절함으로써 이득 특성을 변화시킬 수 있었으며, 이는 회로의 안정도를 보장할 수 있음을 알 수 있었다. 49GHz의 밴드폭내에서 이득은 $8.92\pm0.82 dB$이며, 군지연은 41GHz 이내에서 $\pm9.3 psec$ 범위 이내였다. 사용된 모든 transistor는 GaAs 기반의 $0.15{\mu}m$ 게이트 길이를 가지 는 p-HEMT이며, distributed amplifier는 총 4개의 이득단으로 구성되어 있다.

• 대한전자공학회논문지SD
• /
• 제42권4호
• /
• pp.45-52
• /
• 2005

본 논문은 인쇄 회로 기판에 있는 through hole vias를 시간 영역과 주파수 영역 측정을 통하여 characterization을 하였다. Via characterization은 Time Domain Reflectometry (TDR)를 이용하여 시간 영역에서 측정하고 HSPICE fitting 시뮬레이션으로 via 모델 파라미터를 추출하였다. 또한 2 port Vector Network Analyzer (VNA)로 주파수 영역에서 측정하고 Advanced Design System (ADS) fitting 시뮬레이션 하였다. VNA를 이용한 측정에서는 같은 평면에서 probing하기 위해 ABCD matrix 를 이용하여 do-embedding 수식을 유도하였다. 그리고 single via characterization 결과를 바탕으로 differential signaling을 위한 differential via characterization을 TDR과 VNA 측정을 통하여 수행하였다. Differential via characterization은 TDR 모듈의 odd mode와 even mode 소스들을 이용하여 시간 영역에서 측정하고 HSPICE로 fitting 시뮬레이션으로 모델 파라미터를 추출하였다. 추출된 모든 data는 측정 및 simulation 결과를 비교한 결과 single via의 경우, 최대 $14\%$, differential via의 경우 최대 $17\%$의 오차를 나타내었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.1297-1300
• /
• 2008

A conventional linear accelerator system requires a flat-topped pulse with less than ${\pm}$ 0.5% ripple to meet the beam energy spread requirements and to improve pulse efficiency of RF systems. A pulse transformer is one of main determinants on the output pulse voltage shape. The pulse transformer was investigated and analyzed with the pulse response characteristics using a simplified equivalent circuit model. The damping factor ${\sigma}$ must be >0.86 to limit the overshoot to less than 0.5% during the flat-top phase. The low leakage inductance and distributed capacitance are often limiting factors to obtain a fast rise time. These parameters are largely controlled by the physical geometry and winding configuration of the transformer. A rise time can be improved by reducing the number of turns, but it produces larger pulse droop and requires a larger core size. By tradeoffs among these parameters, the high-voltage pulse transformer with a pulse width of 10 ${\mu}s$, a rise time of 0.84 ${\mu}s$, and a pulse droop of 2.9% has been designed and fabricated to drive a klystron which has an output voltage of 284 kV, 30-MW peak and 60-kW average RF output power. This paper describes design optimization of a high-voltage pulse transformer for high-power pulsed applications. The experimental results were analyzed and compared with the design. The design and optimal tuning parameter of the system was identified using the model simulation.

• Journal of Power Electronics
• /
• 제19권2호
• /
• pp.403-412
• /
• 2019

Aiming at the problems of large dv/dt and di/dt in traditional single-ended converters and high electromagnetic interference (EMI) noise levels, a single-ended isolated converter using the secondary resonance technique is proposed in this paper. In the proposed converter, the voltage stress of the main power switch can be reduced and the voltage across the output diode is clamped to the output voltage when compared to the conventional flyback converter. In addition, the peak current stress through the main power switch can be decreased and zero current switching (ZCS) of the output diode can be achieved through the resonance technique. Moreover, the EMI noise coupling path and an equivalent model of the proposed converter topology are presented through the operational principle of the proposed converter. Analysis results indicate that the common mode (CM) EMI noise and the differential mode (DM) EMI noise of such a converter are deduced since the frequency spectra of the equivalent controlled voltage sources and controlled current source are decreased when compared with the traditional flyback converter. Furthermore, appropriate parameter selection of the resonant circuit network can increase the equivalent impedance in the EMI coupling path in the low frequency range, which further reduces the common mode interference. Finally, a simulation model and a 60W experimental prototype of the proposed converter are built and tested. Experimental results verify the theoretical analysis.

• 전자공학회논문지
• /
• 제53권8호
• /
• pp.39-48
• /
• 2016

본 논문에서는 소스와 드레인의 구조가 육각형인 FinFET에서 구조 변수 및 핀/핑거 개수 증가에 따른 열 저항 모델을 제안한다. 소자의 크기가 감소하여 발열 효과 및 열 특성의 영향이 커졌으며, 이를 분석하기 위해 소자의 열 저항은 중요한 요소이다. 열 저항 모델은 소자에서 열이 생성되는 열원과 열이 빠져나가는 contact를 설정했으며, 도메인은 열원과 4 부분의 소스, 드레인, 게이트, 서브스트레이트 contact를 통해 나누어진다. 또 각각의 contact 열 저항 모델은 TCAD의 시뮬레이션 결과의 온도 및 열 흐름을 분석하여 해석이 용이한 형태로 세분화하였다. 도메인들은 그 구조에 따라 구조 변수를 통한 적분 및 등각 매핑 방식을 기반으로 모델링하였다. 먼저 싱글 핀으로 열 저항을 분석하여 모델링하였으며, 멀티 핀/핑거의 열 저항 모델의 정확도를 높이기 위해 채널증가에 따른 파라미터의 변화를 적용하였다. 제안한 열 저항 모델은 3D Technology CAD 시뮬레이션을 해석하여 얻은 열 저항 결과와 비교하였으며, 싱글 핀 및 멀티 핀의 전체 열 저항 모델은 3 % 이하의 오차를 얻었다. 제안한 열 저항은 핀/핑거 개수의 증가에 따른 열 저항을 예측할 수 있으며, 발열효과 및 열 특성 분석을 계산하여 회로 특성을 개선할 수 있다.