• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2003년도 총회 및 춘계학술발표회
• /
• pp.322-325
• /
• 2003

The feasibility of treating 2-chlorophenol (2CP) contaminated soils with ozone venting was investigated in this research. Adding ozone to the existing air-venting process provides an alternative to achieve a complete in-situ treatment by oxidizing the contaminant in the process. A column study with artificial soil was used to simulate the venting process. Ozone concentrations at 2.4, 7.6 and 19.4 mg/L, and flow rates at 100 and 150 mL/min were used. The reaction times were 10, 20, 50, and 60 minutes. Blank samples using air venting were also run for comparison. It is obvious that ozone-venting had a much faster removal rate than air-venting. As higher concentration of ozone is applied, the reaction rate increased significantly. As higher concentration was applied, the flux of ozone to the liquid film increased. This also increased the removal rate of 2CP and therefore the breakthrough curve came out earlier.

• Environmental Engineering Research
• /
• 제7권4호
• /
• pp.227-237
• /
• 2002

Chemical vapor deposition (CVD), ion beam sputtering (IBS) and sol-gel method were used to prepare TiO$_2$ thin films for degradation of hazardous organic compounds exemplified by 2-chlorophenol (2-CP). The influence of supporting materials and coating methods on the photocatalytic activity of the TiO$_2$ thin films were also studied. TiO$_2$ thin films were coated onto various supporting materials including steel cloth (SS), copper cloth, quartz glass tube (QGT), and silica gel (SG). Results indicate that SS (37 μm)- TiO$_2$ thin film prepared by IBS method improves the photodegradation of 2-CP. Among all supporting materials studied, SS(37 μm) is found to be the best support.

• 환경위생공학
• /
• 제22권2호
• /
• pp.9-20
• /
• 2007

The incineration process has commonly used for wastes amount reduction and thermal treatments of pollutants as the technologies accumulated. However, the process is getting negative public images owing to matter of hazardous pollutants emission. Specially dioxins became a main issue and were mostly emitted from municipal solid wastes incineration. In this reason, pyrolysis/gasification/melting process is presented as an alternative of incineration process. The pyrolysis/gasification/melting process, a novel technology, is middle of verification of commercial plant and development of technologies in Korea. But the survey about the pollutant emission from the process, and background data in these facilities is necessary. So in this survey, t is investigated that the behavior of chlorobenzenes and chlorophenols in plasma type pyrolysis/gasification/melting plant of pilot scale. We investigated discharging behavior of each phase of chlorobenzene through each process in the plsasma type pyrolysis/gasification/melting process. From this result, it was found that about 99 percent of particle-phase chlorobenzene was removed, but on the other hand gas-phase chlorobenzene was increased by about 600 percent through heat exchanger, flue gas cooling, system and semi dry absorption bag filter(SDA/BF). Also, this investigation presented that di-chlorobenzene(DCB) tri-chlorobenzene(TCB), tetra-chlorobenzene(TeCB), penta-chlorobenzene (PCB), except mono-chlorobenzene(MCB) and hexa-chlorobenzene(HCB) were increased through the flue gas cooling system and the semi dry absorption bag filter(SDA/BF). It was investigated that concentration of particle-phase chlorophenol was decreased by about 66 percent, but on the other hand, concentration of gas-phase chlorophenol was increased by about 170 percent through heat exchanger, flue gas cooling system, and semi dry absorption bag filter(SDA/BF). Also, it was found that di-chlorophenol(DCP), tri-chlorophenol(TCP), and penta-chlorophenol(PCP) were increased through the flue gas cooling system, and the semi dry absorption bag filter(SDA/BF). It can be considered that small-scale pilot facility and short investigation period might cause the concentration increase through the flue gas cooling system and the semi dry absorption bag filter(SDA/BF). A further study on real-scale pilot facility and accurate investigation may be required.

• 한국세라믹학회지
• /
• 제41권6호
• /
• pp.485-492
• /
• 2004

비정질알루미나와 기공형성제를 물과 혼합하여 원통형으로 성형하고 수화, 건조 및 소성하여 직경 5mm의 ${\gamma}$알루미나 펠릿을 제조하였다. 이를 Fe$(NO_{3})_{3}$.$9H{2}O$ 용액과 $CH{3}COOH$ 혼합용액에 침척시키고 $200^{\circ}C$ 온도로 3시간 수열처리 하여 펠릿을 담지시킨 후 건조와 소성공정을 통하여 촉매를 제조하였다. 이와 같이 수열법에 의해 제조딘 산화철 담지${\gamma}$알루미나 촉매를 환경촉매로 적용하기 위해 4-chlorophenol과 같은 난분해성물질을 촉매를 사용하지 않는 오존단독공정과 촉매를 사용하는 촉매오존(catalytic ozonation)공정으로 구분하여 OH 라티칼 전환반응 개시제로서의 기능과 그 분해특성을 비교하였다.

• Environmental Engineering Research
• /
• 제25권1호
• /
• pp.62-70
• /
• 2020

Here in this work, a 4-chlorophenol (4-CP)-degrading bacterial strain Bacillus subtilis (B. subtilis) MF447840.1 was isolated from the drain outside the Hyundai car service center, Agartala, Tripura, India. 16S rDNA technique used carried out for genomic recognition of the bacterial species. Isolated bacterial strain was phylogenetically related with B. subtilis. This strain was capable of breaking down both phenol and 4-CP at the concentration of 1,000 mg/L. Also, the isolated strain can able to metabolize five diverse aromatic molecules such as 2-chlorophenol, 2,4-dichlorophenol, 2,4,6-trichlorophenol, 4-nitrophenol, and pentachlorophenol for their growth. An extensive investigation was performed to portray the kinetics of cell growth along with 4-CP degradation in the batch study utilizing 4-CP as substrate. Various unstructured models were applied to evaluate the intrinsic kinetic factors. Levenspiel's model demonstrates a comparatively enhanced R² value (0.997) amongst every analyzed model. The data of specific growth rate (μ), saturation constant (K_S), and Y_X/S were 0.11 h^-1, 39.88 mg/L, along with 0.53 g/g, correspondingly. The isolated strain degrades 1,000 mg/L of 4-CP within 40 h. Therefore, B. subtilis MF447840.1 was considered a potential candidate for 4-CP degradation.

• Bulletin of the Korean Chemical Society
• /
• 제35권8호
• /
• pp.2295-2298
• /
• 2014

To effectively destruct 2-chlorophenol, a representative sterile preservative, nanometer-sized Mn (0.5, 1.0, 3.0 mol %)-incorporated $TiO_2$ powders were synthesized by a solvothermal method. XRD result demonstrated that the Mn ingredients were perfectly inserted into $TiO_2$ framework. The Mn-$TiO_2$ particles exhibited an anatase structure with a particle size of below 20 nm. The absorbance was shifted to the higher wavelength on Mn-$TiO_2$ compared to that of $TiO_2$. Otherwise, the PL intensities which has a close relationship for recombination between holes and electrons significantly decreased on Mn-$TiO_2$. The photodecomposition for 2-chlorophenol in a liquid system was enhanced over Mn-doped $TiO_2$ compared with pure $TiO_2$: 2-chlorophenol of 50 ppm was completely decomposed after 12 h when 1.0 mol % Mn-$TiO_2$ was used. Consequently, the core of this paper is as follows. introducing Mn into $TiO_2$ framework reduced the band-gap, moreover, it played as an electron capture resulted to lower recombination between electrons and holes during photocatalytic reaction for removal of 2-cholophenol.

• Environmental Engineering Research
• /
• 제11권4호
• /
• pp.217-231
• /
• 2006

The gas-phase formation of polychlorinated naphthalenes (PCNs) and dibenzofurans (PCDFs) was experimentally investigated by slow combustion of the three chlorophenols (CPs): 2-chlorophenol (2-CP), 3-chlorophenol (3-CP) and 4-chlorophenol (4-CP), in a laminar flow reactor over the range of 550 to $750^{\circ}C$ under oxidative condition. Contrary to the a priori hypothesis, different distributions of PCN isomers were produced from each CP. To explain the distributions of polychlorinated dibenzofuran (PCDF) and PCN congeners, a pathway is proposed that builds on published mechanisms of PCDF formation from chlorinated phenols and naphthalene formation from dihydrofulvalene. This pathway involves phenoxy radical coupling at unsubstituted ortho-carbon sites followed by CO elimination to produce dichloro-9, 10-dihydrofulvalene intermediates. Naphthalene products are formed by loss of H and/or Cl atoms and rearrangement. The degree of chlorination of naphthalene and dibenzofuran products decreased as temperature increased, and, on average, the naphthalene congeners were less chlorinated than the dibenzofuran congeners. PCDF isomers were found to be weakly dependent to temperature, suggesting that phenoxy radical coupling is a low activation energy process. Different PCN isomers, on the other hand, are formed by alternative fusion routes from the same phenoxy radical coupling intermediate. PCN isomer distributions were found to be more temperature sensitive, with selectivity to particular isomers decreasing with increasing temperature.

• 대한환경공학회지
• /
• 제22권1호
• /
• pp.179-185
• /
• 2000

도시쓰레기 소각로에서 다이옥신류의 생성과 대기로의 방출을 최소화하기 위해 소각로의 후 연소 영역에서 다이옥신 전구물질의 원인이 되는 클로로페놀(이하 CP로 표기)의 거동에 대해 검토하였다. 전기관상로를 이용하여 온도조건 $300{\sim}500^{\circ}C$ 에서 CP을 주입하고 질소가스를 이용하여 반응시간을 조절하였으며 CP의 이성질체별 연소에 필요한 산소량은 계산된 실험식을 이용하여 주입하였다. 반응기내의 공간속도가 60~80/초의 조건에서 Mo-V계 촉매를 사용하여 촉매유무에 따른 CP의 분해 효율을 살펴보았다. 무촉매 열분해시 mono-CP은 74~80%, di-CP은 55~66%, tri-CP은 50~58%의 효율을 보였고, Mo-V계 촉매가 존재할 때 mono-CP은 90~99.9%, di-CP은 86~97%, tri-CP은 76~99%의 효율을 나타내 Mo-V계 촉매를 사용함으로써 약 20~30%의 효율이 증가함을 확인할 수 있다.

• 약학회지
• /
• 제24권2호
• /
• pp.87-95
• /
• 1980

Chlorination to polluted water can produce chlorocompounds which may impair human health. It has been discussed that chlorophenols would be one of undesirable substances in drinking water. This study was undertaken to investigate the production mechanism of chlorophenols by chlorination in the disinfection of water and to determine pollution levels of phenols as precursor of chlorophenols and chloropbenols in some sewage, stream water and tap water in the vicinity of Seoul from January to September, 1979. By chlorination with hyperchlorite to phenols in distilled water, o-chlorophenol was predominantly produced at the concentration of less than 10ppm of free chlorine. o-Chlorophenol, 2,6-dichlorophenol and 2,4-dichlorophenol were also produced by chlorination with the concenration from 20 to 100ppm of free chlorine. From the concentration of 100ppm of free chlorine to 200ppm, o-Chlorophenol was vanished and 2,6-dichlorophenol and 2,4-dichlorophenol were determined. Phenols originated from night soil, municipal sewage and stream were determined at 49.15 ppm. 0.095 ppm and 0.003 ppm in average respectively. About 87 and 88 percent of phenols in sewage and night soil were biodegradated by aeration for 10 days and 74 and 51 percent of phenols in sewage and night soil by spontaneous settling for 10 days. From the tap water in Seoul during summer, 1979, chlorophenols were identified; they were average 0.042 ppb of o-chlorophenol, 0.033 ppb of 2, 6-dichlorophenol and 0.003 ppb of 2, 4-dichlorophenol respectively. With the above result and discussion, it is considered that chlorophenols should be controlled from the source as well as chlorination in water purification.

• 대한화학회지
• /
• 제58권3호
• /
• pp.289-296
• /
• 2014

Electrochemical copolymerization of o-chlorophenol (oCP) with o-hydroxyphenol (oHP) was carried out in aqueous $H_2SO_4$ by using cyclic voltammetry (CV) technique. In addition, CV was used to evaluate the differences in electrochemical characteristics of the copolymer in comparison with the corresponding homopolymers, poly(o-chlorophenol) (PoCP) and poly(o-hydroxyphenol) (PoHP). The variation of peak currents with respect to sweep rates was compared between copolymer and homopolymers, PoCP and PoHP, films. Further support for copolymer characterization was obtained by recording UV-visible, IR spectra and elemental analysis. The mechanism of the electrochemical polymerization has been discussed. The monomer reactivity ratios ($r_1$ and $r_2$) were calculated using Fineman-R$\ddot{o}$ss method and was found to be 0.4 and 1.3 repetitivelly and the copolymer structure is a block structure and more rich in oHP units.