• 한국결정성장학회지
• /
• 제12권2호
• /
• pp.87-90
• /
• 2002

$LiCoO_{2}$ powders were synthesized at various temperatures using lithium hydroxide and cobalt hydroxide as precursors prepared by precipitation process and freeze-drying. In this study, the$LiCoO_{2}$ samples were synthesized via a solid state reaction with various LiOH concentration between 10 % and 30 % excess. And $LiCoO_{2}$powders were calcined at 600~$800^{\circ}C$ in a short time. Measurements of XRD and SEM were performed to characterize the properties of the prepared materials. The effect of amount of Li ions on the structural change in powder has been examined using the XRD analysis. For the not added excess of LiOH, CoOOH phase presented in the XRD pattern of $LiCoO_{2}$ due to loss of Li ions during firing. The morphology and particle size of the powders were examined using SEM. The obtained powders are high temperature-$LiCoO_{2}$HT-LiCoO$_{2}$) and homogeneous with the range of grain size in the order of hundreds of nanometers. The effects of variation of LiOH concentration on the structural change in powder were investigated using the Rietveld analysis. As an analysis result, c/a is constant by 4.99 on all occasions. Finally, the structure of HT-$LiCoO_{2}$ was simulated by the commercial software $Creius^{2}$(Molecular Simulations, Inc.) from the results of Rietveld analysis.

• 원예과학기술지
• /
• 제29권5호
• /
• pp.500-502
• /
• 2011

1999년 'Bristol Fairy' 유래의 결실되는 아조변이체 Gyp99 계통을 선발하였고, 그 계통의 실생 중 계통선발을 거듭한 결과 특성이 우수한 Gyp06-29 계통을 선발하여 2년간 특성 검정을 통해 'Dream Pink'를 육성하였다. 'Dream Pink' 품종은 중간형의 초형을 가지고, 소화는 꽃잎수가 많고 암술이 2개인 분홍 겹꽃이며, 꽃잎은 도란형, 꽃받침 모양은 종형인 식물체 고유특성을 갖는다. 또한 화경이 강하고 흰가루병에 매우 강하고 충해에도 강한 편이다. 여름절화 작형에서 'Dream Pink' 개화는 대조품종인 'My Pink'보다 5일 늦고 절간장과 화경장이 길었으며, 마디와 측지 분화가 많고 분지각은 작았다. 소화와 꽃받침 크기가 크고 꽃잎수가 많았다.

• 한국재료학회지
• /
• 제13권1호
• /
• pp.43-47
• /
• 2003

As and BF$_2$dopants are implanted for the formation of source/drain with dose of 1${\times}$10$^{15}$ ions/$\textrm{cm}^2$∼5${\times}$10$^{15}$ ions/$\textrm{cm}^2$ then formed cobalt disilicide with Co/Ti deposition and doubly rapid thermal annealing. Appropriate ion implantation and cobalt salicide process are employed to meet the sub-0.13 $\mu\textrm{m}$ CMOS devices. We investigated the process results of sheet resistance, dopant redistribution, and surface-interface microstructure with a four-point probe, a secondary ion mass spectroscope(SIMS), a scanning probe microscope (SPM), and a cross sectional transmission electron microscope(TEM), respectively. Sheet resistance increased to 8%∼12% as dose increased in $CoSi_2$$n^{＋}$ and $CoSi_2$$p^{V}$ , while sheet resistance uniformity showed very little variation. SIMS depth profiling revealed that the diffusion of As and B was enhanced as dose increased in $CoSi_2$$n^{＋}$ and $CoSi_2$$p^{＋}$ . The surface roughness of root mean square(RMS) values measured by a SPM decreased as dose increased in $CoSi_2$$n^{＋}$ , while little variation was observed in $CoSi_2$$p^{＋}$ . Cross sectional TEM images showed that the spikes of 30 nm∼50 nm-depth were formed at the interfaces of $CoSi_2$$n^{＋}$ / and $CoSi_2$/$p^{＋}$, which indicate the possible leakage current source. Our result implied that Co/Ti cobalt salicide was compatible with high dose sub-0.13$\mu\textrm{m}$ process.

• 한국재료학회지
• /
• 제19권10호
• /
• pp.538-543
• /
• 2009

Active clays, Diatomite, bentonite and zeolite were used as porous materials for fabricating hygroscopic gypsum boards. Pohang active clay and Cheolwon diatomite showed excellent characteristics of moisture adsorption and desorption. These characteristics were caused by higher surface area and pore volume of porous materials. Moisture adsorption content of gypsum board with 10% active clay(P1) was 62.0 g/m$^2$, and moisture desorption content was 50.2 g/m$^2$. Moisture adsorption content of gypsum board with 10% diatomite(P) was 59.5 g/m$^2$, and moisture desorption content was 49.0 g/m$^2$. Moisture adsorption contents of gypsum boards with porous materials were higher than that moisture desorption contents of gypsum board without porous materials. Correlation coefficient between surface area and moisture adsorption content of gypsum boards was 0.98. Also, correlation coefficient between surface area and moisture desorption content of gypsum boards was 0.97. Moisture adsorption and desorption contents were influenced by surface area and pore volume of the gypsum boards, and surface area had a larger effect on moisture adsorption and desorption.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 추계학술대회논문집
• /
• pp.217-222
• /
• 2006

Internal combustion engine is the main source of environmental pollutants and therefore advanced technology is required to reduce harmful elements from the exhaust gases all over the world. Especially, when the exhaust gas is released front the automotive muffler, exhaust noise has many bad influence on the surrounding environment. In order to reduce the exhaust noise, it is necessary that automotive muffler must be designed for best exhaust efficiency. The sound insulation room was installed for the analysis of an acoustics characteristics of the noise from automotive muffler, in this study. Exhaust gas noise, noise distribution characteristics, pressure and temperature of exhaust gas were investigated with the change of annulus temperature of air cooled annulus automotive muffler and cooled annulus automotive muffler. The following results were obtained with this study. From the frequency analysis of automotive muffler, high noise distribution was observed in the range $100{\sim}2000Hz$. It means that the noise in this range has an dominate influence for the overall noise. Noise reduction of automotive muffler was affected by the temperature of annulus. It is caused the result that the high temperature and pressure of exhaust gas are changed lower by the drop of annulus temperature. The tendencies of noise, the temperature and pressure of exhaust gas are similar to the performance curve of engine. Exhaust gas pressure is determined by the r.p.m. of engine and affected by the cooling performance of automotive muffler.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.1418-1419
• /
• 2011

차세대 전력 반도체인 고전압 GaN 쇼트키 장벽 다이오드의 역방향 특성을 개선하기 위해서 열 산화공정이 제안되었다. AlGaN/GaN 에피탁시 위에 쇼트키 장벽 다이오드 구조가 제작되었으며, 쇼트키 컨택은 증착 후 $450^{\circ}C$에서 산화되었다. 열 산화공정이 메사 측벽의 AlGaN 및 GaN 표면에 $AlO_x$ 및 $GaO_x$를 형성하여 표면으로 흐르는 누설전류를 억제한다. 표면 및 GaN 버퍼를 통한 누설전류는 열 산화 공정 이후 100 ${\mu}m$-너비당 51.3 nA에서 24.9 pA로 1/2000 배 수준으로 감소하였다. 표면 산화물 형성으로 인하여 생성된 Ga-vacancy와 Al-vacancy는 acceptor로 동작하여 surface band bending을 증가시켜 쇼트키 장벽 높이를 증가시킨다. 애노드-캐소드 간격이 5 ${\mu}m$인 제작된 소자는 0.99 eV의 높은 쇼트키 장벽 높이를 획득하여, -100 V에서 0.002 A/$cm^2$의 낮은 누설전류를 확보하였다. 애노드-캐소드 간격이 5에서 10, 20, 50 ${\mu}m$로 증가되면 소자의 항복전압은 348 V에서 396, 606, 941 V로 증가되었다. 열 산화공정은 전력용 GaN 전자소자의 누설전류감소와 항복전압 증가를 위한 후처리 공정으로 적합하다.

• The Korean Journal of Pain
• /
• 제13권1호
• /
• pp.89-92
• /
• 2000

Background: The purpose of this study is to determine if there is any relationship among the distance from the skin to cervical epidural space, patients height, weight, neck circumference and body mass index (BMI). Methods: The data was collected from 219 patients who suffer acute and chronic pain from neck and upper extrmities. Cervical epidural catheterization was perfomed at the $C_{6-7}$, $C_7-T_1$ intervertebral space. The depth of the epidural space from the skin, age, height, weight and neck circumference were measured by a standard ruler and the BMI was calculated. Results: The distance from the skin to cervical epidural space at $C_{6-7}$, $C_7-T_1$ in males, and $C_{6-7}$, $C_7-T_1$ in female were $4.69{\pm}0.55$ cm, $5.24{\pm}0.61$ cm, $4.28{\pm}0.49$ cm, and $4.83{\pm}0.54$ cm, respectively. Conclusions: The results indicated that body weight, neck circumference and BMI could be a guideline for the location of the cervical epidural space.

• 한국수산과학회지
• /
• 제37권5호
• /
• pp.359-365
• /
• 2004

To study the lipid adsorption characteristic of chitosans with different molecular weights and the degrees of deacetylation, in vitro test and near-infrared (NIR) spectroscopic analysis have been performed for the measurement of lipid adsorption characteristics of chitosan. The degrees of deacetylation in chitosans were $70{\%},\;85{\%}\;and\;92{\%}$ at different deacetylation times (1 hr, 2 hrs, 3 hrs), respectively. The molecular weight of each chitosan was controlled by enzymatic hydrolysis, and then the molecular weight of the chitosan was 4 kDa. The bulk density, water holding capacity and fat binding capacity of each chitosan powder were $96.2-504.0{\%},\;374.4-1217.9{\%},\;and\;307.0-659.3{\%}$, respectively. The higher molecular weight of chitosan was exhibited the lower bulk density and the higher water and fat binding capacities. Bindinf capacities of chitosan powders to bile salts, cholesterol and linoleic acid were $41.2-63.3{\%},\;40.8-67.4{\%},\;42.6-72.6{\%}$, respectively. In NIR spectrum of lipid adsorbed chitosan the occurrence static eletronical binding between chitosan and lipid was identified by NIR spectrum peak induced from combination of carboxylic group in lipid and amino group in chitosan. In conclusion, the higher degree of deacetylation and molecular weight of chitosan showed the higher lipid binding capacity and the lipid adsorption of chitosan were occurred by combination of carboxylic group in lipids and amino group in chitosan.

• Journal of Korean Neurosurgical Society
• /
• 제56권5호
• /
• pp.410-418
• /
• 2014

Objective : The epidural fluid collection (EFC) as a complication of cranioplasty is not well-described in the literature. This study aimed to identify the predictive factors for the development of EFC as a complication of cranioplasty, and its outcomes. Methods : From January 2004 to December 2012, 117 cranioplasty were performed in our institution. One-hundred-and-six of these patients were classified as either having EFC, or not having EFC. The two groups were compared to identify risk factors for EFC. Statistical significance was tested using the t-test and chi-square test, and a logistic regression analysis. Results : Of the 117 patients undergoing cranioplasty, 59 (50.4%) suffered complications, and EFC occurred in 48 of the patients (41.0%). In the t-test and chi-test, risk factors for EFC were size of the skull defect (p=0.003) and postoperative air bubbles in the epidural space (p<0.001). In a logistic regression, the only statistically significant factor associated with development of EFC was the presence of postoperative air bubbles. The EFC disappeared or regressed over time in 30 of the 48 patients (62.5%), as shown by follow-up brain computed tomographic scan, but 17 patients (35.4%) required reoperation. Conclusion : EFC after cranioplasty is predicted by postoperative air bubbles in the epidural space. Most EFC can be treated conservatively. However, reoperation is necessary to resolve about a third of the cases. During cranioplasty, special attention is required when the skull defect is large, since EFC is then more likely.

• 한국산학기술학회논문지
• /
• 제16권1호
• /
• pp.627-633
• /
• 2015

본 논문에서는 고속 PMIC(Power Management Integrated Circuit) 회로를 위한 저전압 입력 보호기능을 가지는 모바일용 LDO(Low Drop-Out) 레귤레이터를 설계하였다. 설계된 LDO 레귤레이터는 밴드갭 기준전압회로, 오차 증폭회로, 파워 트랜지스터 등으로 이루어진다. LDO 레귤레이터는 3.3 V 전원전압으로부터 2.5 V 출력을 갖도록 설계되었으며, 저전압 입력보호 기능을 하는 UVLO 회로는 전원부와 파워 트랜지스터 사이에 삽입된다. 또한 UVLO는 3.3 V 구동전압에서, 하강시 1.2 V 에서 LDO 레귤레이터 동작을 멈추게 하고, 구동전압 상승 시 2.5 V 에서 LDO 레귤레이터가 정상 동작한다. $0.35{\mu}m$ 5 V 저전압 CMOS 공정을 사용하여 모의실험 한 결과, 설계한 LDO 레귤레이터는 0.713 mV/V의 라인레귤레이션을 가지고, 부하전류가 0 mA에서 40 mA로 변할 때 $8.35{\mu}V/mA$의 로드레귤레이션을 보였다.