• 한국전기전자재료학회논문지
• /
• 제37권2호
• /
• pp.188-194
• /
• 2024

This paper introduces an optimized oxygen (O₂) plasma surface treatment technique to enhance sphere lithography on hydrophobic photoresist surfaces. The focus is on semiconductor manufacturing, particularly the creation of finer structures beyond the capabilities of traditional photolithography. The key breakthrough is a method that makes substrate surfaces hydrophilic without altering photoresist patterns. This is achieved by meticulously controlling the O₂ plasma treatment duration. The result is the consistent formation of nano and microscale patterns across large areas. From an academic perspective, the study deepens our understanding of surface treatments in pattern formation. Industrially, it heralds significant progress in semiconductor and precision manufacturing sectors, promising enhanced capabilities and efficiency.

• KSBB Journal
• /
• 제22권6호
• /
• pp.433-437
• /
• 2007

본 연구에서는 나노임프린트 리소그래피를 이용하여 500 nm line, 600 nm pore, $1{\mu}m$ pore, $2.5{\mu}m$ pore의 마이크로 수준에서 나노 수준에 이르는 다양한 크기와 모양의 nanopore 형태 패턴을 제작하였다. Thermal imprint 방식과 달리 상온, 저압에서 임프린팅이 가능하며 사용되는 스탬프의 수명을 늘리고 보다 미세하고 복잡한 형태의 패턴을 제작할 수 있는 UV-assisted imprint 방식을 사용하였다. E-beam lithography로 패턴을 각인한 quartz소재의 스탬프를 사용하였으며 스탬프의 재질이 투명하여 UV 조사시 UV curable resin이 경화될 수 있도록 하였다. 또한 스탬프의 표면을 (heptadecafluoro-1,1,2,2-tetrahydrodecyl) trichlorosilane의 monolayer 층으로 미리 코팅하여 임프린트 후 스탬프와 기판과의 releasing을 쉽게함과 동시에 패턴의 일부가 스탬프에 묻어 나와 전사된 패턴에 defect가 없도록 하였다. 또한, gold를 미리 증착하여 임프린팅함으로써 lift-off 시에 필요한 hi-layer 층이 필요 없게 되어 산소 플라즈마를 이용한 에칭이 더욱 쉽고 lift-off 공정이 생략될 수 있도록 하였다. 나노임프린트 공정에 있어 가장 큰 문제점은 잔여층의 생성이며 이러한 잔여층을 제거하고자 산소 플라즈마 에칭을 하였다. 에칭공정을 통해 gold의 표면이 완전히 드러났으며 산소 플라즈마를 통해 gold의 표면이 친수성으로 바뀌어 추후 단백질 고정화를 더욱 쉽게 하였다. 그리하여 나노임프린트 기술을 이용해 나노크기의 바이오소자 제작을 가능하게 하였다.

• 공업화학
• /
• 제16권6호
• /
• pp.853-856
• /
• 2005

자성 메모리반도체의 핵심 소자인 magnetic tunnel junction (MTJ) stack에 대한 고밀도 유도결합 플라즈마 반응성 식각이 연구되었다. MTJ stack은 electron(e)-beam lithography 공정을 사용하여 나노미터 크기의 패턴 형성이 되었으며 식각을 위한 하드 마스크(hard mask)로서 TiN 박막이 이용되었다. TiN 박막은 Ar, $Cl_2/Ar$, 그리고 $SF_6/Ar$들의 가스를 사용하여 식각공정이 연구되었다. E-beam lithography로 패턴된 TiN/MTJ stack은 첫 번째 단계로 TiN 하드 마스크가 식각되고 두 번째로 MTJ stack이 식각되어 완성되었다. MTJ stack은 Ar, $Cl_2/Ar$, $BCl_3/Ar$을 이용하여 식각되었으며 각각의 가스농도와 가스 압력을 변화시켜 MTJ stack의 식각특성이 조사되었다.

• 한국세라믹학회:학술대회논문집
• /
• 한국세라믹학회 2003년도 추계총회 및 연구발표회 초록집
• /
• pp.155.1-155
• /
• 2003

• 한국전기전자재료학회논문지
• /
• 제22권8호
• /
• pp.682-688
• /
• 2009

A periodic away of zinc oxide(ZnO) micro-rods as fabricated by using chemical bath deposition and photo-lithography. Vertically aligned ZnO micro-rods array was successfully grown by chemical bath deposition method on ZnO seed layer. The ZnO seed layer was deposited on glass and the patterning was made by standard photo-lithography technique. The selective growth of ZnO micro-rods as achieved with the masked ZnO seed layer. The fabricated ZnO micro rods were found to be single crystalline and have grown along hexagonal c-axis direction of (0002) which is same as the preferred growth orientation of ZnO seed layer.

• 제어로봇시스템학회논문지
• /
• 제14권5호
• /
• pp.420-425
• /
• 2008

PMMA light guiding plate with nano-sized pattern was fabricated using anodized aluminum oxide membrane as a template for nano imprint lithography. Nano-sized pore arrays were prepared by the self-organization processes of the anodic oxidation using the aluminum plate with 99.999% purity. Since the aluminum plate has a rough surface, the aluminum plate with thickness of 1mm was anodized after the pre-treatments of chemical polishing, and electrochemical polishing. The surface morphology of the alumina obtained by the first anodization process was controlled by the concentration of electrochemical solution during the first anodization. The surface morphology of the alumina was also changed according to temperature of the solution during chemical polishing performed after first anodization. The pore widening process was employed for obtaining the one-channel with flat surface and height of the channel because the pores of the alumina membrane prepared by the fixed voltage method shows the structure of two-channel with rough surface. It is shown from SPM results that the nano-sized pattern on PMMA light guiding plate fabricated by nano imprint lithography method was well transferred from that of anodized aluminum oxide template.

• Bulletin of the Korean Chemical Society
• /
• 제33권1호
• /
• pp.83-89
• /
• 2012

Due to the potential importance and usefulness, usage of highly ordered nanoporous anodized aluminum oxide can be broadened in industry, when highly ordered anodized aluminum oxide can be placed on a substrate with controlled thickness. Here we report a facile route to highly ordered nanoporous alumina with the thickness of hundreds-of-nanometer on a silicon wafer substrate. Hexagonally or tetragonally ordered nanoporous alumina could be prepared by way of thermal imprinting, dry etching, and anodization. Adoption of reusable polymer soft molds enabled the control of the thickness of the highly ordered porous alumina. It also increased reproducibility of imprinting process and reduced the expense for mold production and pattern generation. As nanoporous alumina templates are mechanically and thermally stable, we expect that the simple and costeffective fabrication through our method would be highly applicable in electronics industry.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
• /
• pp.268.2-268.2
• /
• 2013

Nanogap interdigitated electrodes (NIDEs) can serve as an alternative platform for the biomolecular detection [1]. In this work, the NIDEs were adopted in a simple and sensitive detection of Pneumococcal surface protein A (PspA). The NIDEs were fabricated by the combination of photo and chemical lithography. Photolithographically-defined initial gap of about 200 nm was narrowed down to a few tens of nanometers by surface-initiated growth of the initial electrodes (chemical lithography) [2]. Bare silicon oxide surface between the electrodes was chemically modified to immobilize capturing antibodies and, after exposure to the samples, the device was immersed in a solution containing the probe-antibody-conjugated Au nanoparticles (Au NPs). The conductance change accompanied with the Au NP immobilization was interpreted as the existence of PspA. Detection limit of the measurements and further improvement of the detection efficiency were discussed with the results from I-V analysis, scanning electron microscopy, and atomic force microscopy.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.1043-1047
• /
• 2003

With the advancement of micro-systems and nanotechnology, the need for ultra-precision fabrication techniques has been steadily increasing. In this paper, a novel nano-structure fabrication process that is based on the fundamental understanding of nano-scale tribological interaction is introduced. The process, which is called Mechano-Chemical Scanning Probe Lithography (MC-SPL), has two steps, namely, mechanical scribing for the removal of a resist layer and selective chemical etching on the scribed regions. Organic monolayers are used as a resist material, since it is essential for the resist to be as thin as possible in order to fabricate more precise patterns and surface structures. The results show that high resolution patterns with sub-micrometer scale width can be fabricated on both silicon and various metal surfaces by using this technique.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.41-41
• /
• 2006

Step and Flash Imprint Lithography is an interesting low cost alternative to traditional microlithographic processes that offers the ability to efficiently produce nanostructures at unprecedented resolution. New photopolymerizable formulations are required to enable this process. This paper will describe progress in the design and development of acrylate and vinyl ether based platforms for this application together with efforts to prepare photopolymerizable, thermally stable, magterials with low dielectric constants for use in an efficient new method for fabricating the interconnect structures in microprocessors.