• Korean Journal of Agricultural Science
• /
• v.50 no.4
• /
• pp.817-828
• /
• 2023

Deteriorating soil physical properties and increasing soil pathogens due to the continuous cultivation of field crops are the leading causes of productivity deterioration. Crop rotation, soil heat treatment, and chemical control are used as pest control methods; however, each has limitations in wide application to domestic agriculture. In particular, chemical control requires improvement due to direct exposure to sterilizing solution, odor, and high-intensity work. To improve the overall domestic agricultural environment, the problems of time and cost, such as field maintenance and cultivation scale, must be addressed; therefore, mechanization technology for chemical control must be secured to derive improvement effects in a short period. Most related studies are focused on the control effect of the DMDS (dimethyl disulfide) sterilizer, and research on the performance of the sterilization spray device has been conducted after its introduction in Korea, but research on the corrosion suitability of the material is lacking. This study conducted a corrosion test to secure the corrosion resistance of a soil sterilizer injection pump, and a mechanical failure mode by corrosion by the material was established. The corrosion test comprised operation and neglect tests in which the sterilizing solution was circulated in the pump and remained in the pump, respectively. As a result of the corrosion test, damage occurred due to the weakening of the mechanical strength of the graphite material, and corrosion resistance to aluminum, stainless steel, fluororubber, and PPS (polyphenylene sulfide) materials was confirmed.

• The Journal of Advanced Prosthodontics
• /
• v.4 no.2
• /
• pp.84-88
• /
• 2012

PURPOSE. To evaluate the efficacy of sodium hypochlorite (1 : 10) and iodophor disinfectants on alginate impressions along with their effect on the survived bacterium count on the gypsum cast. MATERIALS AND METHODS. Four alginate impression on each dentate patients were made, of which Group I were not washed or disinfected, Group II impressions were merely washed with water, Group III were disinfected by spraying with sodium hypochlorite (1 : 10), Group IV were disinfected with iodophor (1 : 213). Gypsum cast (type III) were made from all the impression. Impressions and gypsum cast were swabbed in mid palatal region for bacterial culture. Bacterial colony counting done after 3 days of incubation at $37^{\circ}C$ in blood agar media. The data obtained was analyzed by one way ANOVA test at a significant difference level of 0.05. RESULTS. Group I and Group II showed significantly more bacteria compared to Group III and Group IV. Bacterial colonies on the alginate impression and gypsum cast in group disinfected with Sodium hypochlorite (1 : 10) were 0.18, 0.82 respectively compared to group treated with iodophor (1 : 213). There was an increase in bacterial count on dental cast compared to source alginate impressions. CONCLUSION. Sodium hypochlorite (1 : 10) was found to be better disinfectant for alginate impression. There was an indication of increase in number of bacteria from alginate impression to making of dental cast. Additional gypsum cast disinfectant procedures need to be encouraged to completely eliminate cross infection to dental laboratory.

• Food Science and Biotechnology
• /
• v.17 no.5
• /
• pp.971-975
• /
• 2008

This study was to examine the potential disinfection efficiencies of 10 compounds by determining their antimicrobial capacity and ichthyotoxicity. Antimicrobial effects against Vibrio sp., Edwadsiella tarda, Streptococcus sp., and Staphylococcus sp. were tested using 10 different disinfectants; hydrogen peroxide, sodium hypochlorite, chlorine dioxide, povidon iodine, formaldehyde, glutaraldehyde, quaternary ammonium compounds (QACs), didecyl dimethyl ammonium chloride (DDAC), ortho-dichlorobenzen, and copper sulfate. Chlorine dioxide ($ClO_2$) containing 5% $ClO_2$ and copper sulfate had no effects on bactericidal activity, while the other disinfectants resulted in 99.99% bactericidal activity against 4 strains of fish pathogenic bacteria. The ichthyotoxicity of the 10 disinfectants was investigated using 3 kinds of fish species; flounder (Paralichthys olivaceus), rockfish (Sebastes pachycephalus), and black sea bream (Acanthopagrus schlegelii). Median lethal concentration ($LC_{50}$) values of the 10 disinfectants were estimated to determine toxicity ranges of the doses within 24 hr. Among test disinfectant solutions, hydrogen peroxide showed the highest $LC_50$ in flounder (201.3), rockfish (269.7), and black sea bream (139.3 ppm). DDAC revealed the lowest $LC_{50}$ in flounder (2.1), rockfish (1.0), and black sea bream (1.5 ppm). These results suggest that DDAC, quaternary ammonium compounds, glutaraldehyde, and sodium hypochlorite are effective disinfectants for fish and bacterial species examined in this study.

• Korean Journal of Veterinary Service
• /
• v.44 no.3
• /
• pp.149-155
• /
• 2021

In virucidal efficacy testing, the chemical inactivation cannot be determined for all viruses due to the difficulties or the inability to culture sufficiently or the risk of exposure to the viruses. Therefore, disinfectants against these viruses could be evaluated by different methods and surrogate viruses are used as alternative. In this study we developed a method for efficacy testing of veterinary disinfectants using one of the candidate surrogate viruses, bacteriophage MS2, as part of the research on the selection of surrogate viruses for efficiency of efficacy testing of veterinary disinfectants. This method is based on the Animal and Plant Quarantine Agency (APQA) guidelines for efficacy testing of veterinary disinfectants. Bacteriophage and disinfectant are reacted in suspension in accordance with the APQA guidelines and then a newly established double agar layer method is applied for the efficacy test. The double agar layer method is summarized as follows: 1) The bottom agar with 1.5% agar is boiled and cooled before poured into petri dishes at volume of 20 mL, and dried under biological safety cabinet. 2) The top agar with 0.7% agar is boiled and kept at 50℃ before E. coli culture was seeded. 3) The serially diluted bacteriophage MS2-disinfectant mixtures 0.05 mL and E. coli host 0.01 mL (OD₆₀₀ 0.2~0.3) are mixed with 5 mL of top agar and incubate them at 50℃ for 5 min for reaction. 4) The resulting mixture is poured over top of a bottom agar plate and rocked sufficiently to ensure that the top agar covers the entire surface of the bottom agar. 5) The double agar layer is then placed under biological safety cabinet to allow the agar layer to solidify and subsequently incubated at 37℃ for 24 hr. 6) Following incubation, the plates may be inspected for plaques and record results.

• Korean Journal of Plant Resources
• /
• v.36 no.1
• /
• pp.100-106
• /
• 2023

In order to control the fire blight disease, all plants within the radius of the diseased orchard were removed in the early stage of the outbreak, or antibiotics control was performed for prevention. Since the beginning of antibiotics use on plants, the potential for development of resistance to antibiotics by the plant pathogen and unintended detrimental effects on the fruit trees and environment has become a problem. The purpose of this study is to determine the degree of phytotoxicity to fruit trees caused by excessive spraying of the fire blight disease disinfectant and to establish basic data for safe disinfectant guide. We analyzed whether damage to the fruit tree and the maximum residual limit of fruit was exceeded when three kinds of the fire blight disease disinfectants were continuously sprayed in excess of the number of safe use during the growing season. There was no phytotoxicity in apple 'Fuji' and pear 'Niitaka', and oxolinic acid was detected beyond the limit of quantitation in 'Fuji' grown without a bag, and the other disinfectants were detected below the maximum residue limit. When these disinfectants are continuously sprayed in excess of the number of safe, phytotoxicity may remain on the fruit. Therefore, it is necessary to observe the prescribed dilution factor and observe the safe frequency and the timing of use.

• Proceedings of the Korean Society of Fisheries Technology Conference
• /
• 2003.05a
• /
• pp.93-94
• /
• 2003

In recent, there are many report about nonthermal disinfection using electorlyzed water, Also, foodborne illnesses associated with pathogenic bacteria such as Listeria monocytogenes and Escherichia coli O157:H7 have raised concerns about the adequacy of disinfectants (Kim et at., 2000). Foodborne pathogens in vegetables and kitchen apparatus are not easy to disinfect but also hard to use chemical compounds for disinfection. (omitted)

• Journal of Microbiology and Biotechnology
• /
• v.18 no.3
• /
• pp.497-502
• /
• 2008

The essential oil from the cones of Pinus koraiensis was prepared after removing the seeds, and its chemical composition analyzed using gas chromatography-mass spectrometry (GC-MS). Hydrodistillation of the P. koraiensis cones yielded 1.07% (v/w) of essential oil, which was almost three times the amount of essential oil extracted from the needles of the same plant. Moreover, the antimicrobial activities of the oil against the growth of Gram-positive bacteria, Gram-negative bacteria, and fungi were evaluated using the agar disc diffusion method and broth microdilution method. Eighty-seven components, comprising about 96.8% of the total oil, were identified. The most abundant oil components were limonene (27.90%), ${\alpha}$-pinene (23.89%), ${\beta}$-pinene (12.02%), 3-carene(4.95%), ${\beta}$-myrcene (4.53%), isolongifolene (3.35%), (-)-bornyl acetate (2.02%), caryophyllene (1.71%), and camphene (1.54%). The essential oil was confirmed to have significant antimicrobial activities, especially against pathogenic fungal strains such as Candida glabrata YFCC 062 and Cryptococcus neoformans B 42419. Therefore, the present results indicate that the essential oil from the cones of Pinus koraiensis can be used in various ways as a nontoxic and environmentally friendly disinfectant.

• The Plant Pathology Journal
• /
• v.39 no.4
• /
• pp.351-360
• /
• 2023

Citrus melanose, caused by Diaporthe citri, has been one of the serious diseases, and chemical fungicides were used for protection in many citrus orchards of Jeju Island. Establishing a disinfectant resistance management system and reducing pesticide usage would be important for contributing to safe agricultural production. In this study, monitoring of chemical resistance was performed with 40 representative D. citri isolates from many citrus orchards in Jeju Island. Four different fungicides, kresoxim-methyl, benomyl, fluazinam, and prochloraz manganese, with seven different concentrations were tested in vitro by growing the mycelium of the fungal isolates on the artificial medium potato dextrose agar. Among the 40 fungal isolates, 12 isolates were investigated as resistant to kresoxim-methyl which could not inhibit the mycelium growth to more than 50%. Especially isolate NEL21-2 was also resistant against benomyl, whose hyphae grew well even on the highest chemical concentration. However, any chemical resistance of fungal isolates was found against neither fluazinam nor prochloraz manganese. On the other hand, in vivo bio-testing of some resistant isolates was performed against both kresoxim-methyl and benomyl on young citrus leaves. Typical melanose symptoms developed on the citrus leaves pre-treated with both agrochemicals after inoculation with the resistant isolates. However, no or less symptoms were observed when the susceptible isolates were inoculated. Based on these results, it was suggested that some resistant isolates of D. citri occurred against both systemic fungicides, which may be valuable to build a strategy for protecting citrus disease.

• Journal of the Korean Society of Visualization
• /
• v.15 no.2
• /
• pp.26-32
• /
• 2017

Hypochlorous acid(HOCl) is a chemical that is a safe sanitizer and disinfectant approved by the Food and Drug Administration as a food additive, exhibiting strong sterilizing power with low effective chlorine concentration of pH 5.0-6.5 and effective chlorine concentration 10-80 ppm. To apply to fishery industries, we develope the HOCl ice for store or delivery of fishery products. However when HOCl is being frozen, the contained HOCl are expelled out from the ice due to the molecular structures of ice; there is no space to contain HOCl inside. To increase chlorine containing amount in ice, we develop the alginate particles containing HOCl which is bio comparable since alginate is a natural polymer extracted from the brown algae and it is widely used for drug delivery and containing substances, etc. We produce HOCl with water as base solution suppressing osmotic flow from fishery products, and mix it with the developed alginate particles and made HOCl-alginate ice and checked the remaining amount of HOCl. We measure the change of pH and chlorine concentration optimizing the best concentration of alginate particles. Finally, we produce the alginate particle HOCl ices with respect to the alginate's optimal concentration.

• The Journal of Korean Academy of Prosthodontics
• /
• v.27 no.2
• /
• pp.249-259
• /
• 1989

Dental impression materials often become contaminated with patients' saliva and blood which creates the potential for cross-infection. It was the purpose of this study to investigate the effects of disinfection of three different rubber impression materials with four different disinfecting solutions. Polysulfide, vinyl polysiloxane and polyether impression materials were mixed according to the manufacturer's directions and samples were formed on a stainless steel model. On removal from the standard model, impressions were immersed in a disinfectant (acid-potentiated glutaraldehyde, phenollic compound, chlorine compound, iodophor) at room tempera tures for ten minutes. After disinfection, the distance between reference points(linear dimension) was measured using the non-contact automatic cordinate measuring projector(MZ-1, Nikon). Through statistical analyses on the data from this study,. the following conclusions were obtained. 1. Polysulfide, vinyl polysiloxane impressions were disinfected without dimensional change.(p>0.05) 2. Polyether impressions which were immersed in acid-potentiated glutaraldehyde were statistically different from control group.(p<0.05) But the amount of shrinkage(0.04%) would not be clinically significant. 3. By immersion of polysulfide, vinyl polysiloxane, polyether impressions in Banicide, Biocide, Multicide plus, sodium hypochlorite for ten minutes, clinically accurate impressions were obtained without dimensional change.