• 대한화학회지
• /
• 제51권4호
• /
• pp.365-374
• /
• 2007

본 연구에서는 고등학교 3학년 학생 100명을 대상으로 세트화 된 질문지를 사용하여 화학 평형 이 동시 반응 속도 변화에 대한 학생들의 이해 정도를 조사하고, 반응 속도의 기본 개념에 대한 질문이 화학 평 형 이동시의 반응 속도 변화를 이해하는데 도움이 되는지를 조사하였다. 질문지는 A, B, A' 세 개의 세트로 구 성하였으며, A, B, A' 순서대로 응답하도록 하였다. A세트는 화학 평형 이동시의 반응 속도 변화에 대한 문항, B세 트는 반응 속도의 기본 개념에 대한 문항으로 되어 있으며, A'세트는 A세트와 동일한 문항으로 되어 있다. 학 생들의 응답을 분석한 결과 화학 평형 이동시 반응 속도 변화에 대해 정반응 속도 변화보다 역반응 속도 변 화에 대한 이해가 낮았다. 그리고 평형에서 농도 변화에 따른 반응 속도 변화에 대한 이해는 어느 정도 되어 있으나 온도 변화에 따른 반응 속도 변화에 대한 이해도는 아주 낮았다. 그러나 반응 속도 기본 개념에 대한 정답률은 아주 높아 평형 이동시 반응 속도 변화에 대한 낮은 이해도는 반응 속도에 대한 기본 개념이 부족 한 것이 아니라 이를 화학 평형 이동에 제대로 연계시키지 못한 결과로 생각된다. A세트와 A'세트의 정답률 을 비교한 결과 A'세트의 정답률이 통계적으로 유의미하게 높게 나타나 B세트의 문항이 A'세트의 문항 해결 에 도움이 된 것으로 해석할 수 있다. 그러므로 이와 같은 세트화 된 질문지가 학생들의 개념 연결에 도움을 줄 수 있는 가능성을 확인하였다.

• Bulletin of the Korean Chemical Society
• /
• 제29권5호
• /
• pp.1051-1054
• /
• 2008

The entropy production in a non-equilibrium state based on the reversible Oregonator model of the Belousov-Zhabotinskii (BZ) reaction system has been studied. The reaction affinity and the reaction rate for the individual steps have been calculated by varying the concentrations of key variables in the system. The result shows a linear relationship between the reaction affinity and the reaction rate in the given concentration range. However, the overall entropy calculated on the basic assumption that the entropy in a reaction system corresponds to the summation of a product of reaction affinity and reaction rate of individual steps shows a nonlinearity of the reaction system. The results well agrees with the fact that the entropy production is not linear or complicated function in a non-linear reaction system.

• Korean Chemical Engineering Research
• /
• 제47권3호
• /
• pp.380-385
• /
• 2009

평판형 교반기를 사용하여 2-amino-2-methyl-1-propanol(AMP)가 용해된 methanol, ethanol, n-propanol, n-butanol, ethylene glycol, propylene glycol, 및 propylene carbonate와 같은 극성 용매에서 이산화탄소($CO_2$)의 흡수속도를 측정하였다. $CO_2$의 흡수속도와 carbamate 생성 반응 메커니즘을 사용하여 기-액 불균일반응계의 빠른 반응영역에서 $CO_2$-AMP의 반응속도론을 해석하였으며 용매의 용해도 매개변수와 반응속도상수와의 상관관계를 제시하였다.

• 한국응용과학기술학회지
• /
• 제3권2호
• /
• pp.41-47
• /
• 1986

The transesterification reaction between diethanolamine and methyl-methacrylate was kinetically investigated in the presence of various metal acetate catalysts at $120^{\circ}C$. The quantity of methylmethacrylate reacted in the reaction flask was measured by gas chromatography and liquid chromatography, and the reaction rate was investigated by measuring of the quantity of products and reactnts under various catalysts. The transesterification reaction was carried out in the first order reaction kinetics with respect to the concentration of diethanolamine and methylmethacrylate, respectively. The apparent rate constant was found to obey first-order kinetics with respect to the concentration of catalyst. The linear relationship was shown between apparent rate constant and reciprocal absolute temperature, and by the Arrhenius plot, the activation energy has been calculated as 11.08 Kcal with zinc acetate catalyst, 17.99 Kcal without catalyst. The maximum reaction rate was appeared at the range of 1.4 to 1.6 of electronegativity of metal ions and instability constant of metal acetates.

• 한국응용과학기술학회지
• /
• 제4권1호
• /
• pp.67-71
• /
• 1987

The transesterification reaction between diethanolamine and methyl methacrylate was kinetically investigated in the presence of various metal acetate catalysts at $120^{\circ}C$. The amount of reacted methyl methacrylate was measured by gas chromatography and liquid chromatography, and the reaction rate also measured from the amount of reaction products and reactants under each catalyst. The transesterification reaction was carried out in the first order with respect to the concentration of diethanolamine and methyl methacrylate, respectively. The over-all order is 2nd. The apparent rate constant was found to obey first-order kinetics with respect to the concentration of catalyst. The maximum reaction rate was appeared at the range of 1.4 to 1.6 of electronegativity of metal ions and instability constant of metal acetates.

• Korea-Australia Rheology Journal
• /
• 제14권2호
• /
• pp.63-70
• /
• 2002

Chemical mechanical planarization (CMP) is the polishing process enabled by both chemical and mechanical actions. CMP is used in the fabrication process of the integrated circuits to achieve adequate planarity necessary for stringent photolithography depth of focus requirements. And recently copper is preferred in the metallization process because of its low resistivity. We have studied the effects of chemical reaction on the polishing rate and surface planarity in copper CMP by means of numerical simulation solving Navier-Stokes equation and copper diffusion equation. We have performed pore-scale simulation and integrated the results over all the pores underneath the wafer surface to calculate the macroscopic material removal rate. The mechanical abrasion effect was not included in our study and we concentrated our focus on the transport phenomena occurring in a single pore. We have observed the effects of several parameters such as concentration of chemical additives, relative velocity of the wafer, slurry film thickness or ash)tract ratio of the pore on the copper removal rate and the surface planarity. We observed that when the chemical reaction was rate-limiting step, the results of simulation matched well with the experimental data.

• 대한화학회지
• /
• 제57권6호
• /
• pp.769-777
• /
• 2013

The effect of operating conditions (temperature and the partial pressures of H2 and CO) on the reaction rate of Fischer-Tropsch synthesis (FTS) were investigated by carrying out experiments according to a Box-Behnken design (BBD), and were mathematically modeled by using response surface methodology (RSM). The catalyst used was a nano-structured cobalt/manganese oxide catalyst, which was prepared by thermal decomposition. The rate of synthesis was measured in a fixed-bed micro reactor with $H_2/CO$ molar feed ratio of 0.32-3.11 and reactor pressure in the range of 3-9.33 bar at space velocity of $3600h^{-1}$ and a temperature range of 463.15-503.15 K, under differential conditions (CO conversion below 2%). The results indicated that in the present experimental setup, the temperature and the partial pressure of CO were the most significant variables affecting reaction rate. Based on statistical analysis the quadratic model of reaction rate of FTS was highly significant as p-value 0.0002.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 제26회 KOSCO SYMPOSIUM 논문집
• /
• pp.129-136
• /
• 2003

Numerical study with momentum-balanced boundary conditions has been conducted to grasp chemical effects of added $CO_{2}$ and $H_{2}O$ to fuel- and oxidizer-sides on flame structure and NO emission behavior in $CH_{4}$/Air counterflow diffusion flames. The dilution with $H_{2}O$ results in significantly higher flame temperatures and NO emission, but dilution with $CO_{2}$ has much more chemical effects than that with $H_{2}O$. Maximum reaction rate of principal chain branching reaction due to chemical effects decreases with added $CO_{2}$. but increases with added $H_{2}O$. The NO emission behavior is closely related to the production rate of OH, CH and N. The OH radical production rate increases with added $H_{2}O$ but those of CH, N decrease. On the other hand the production rates of OR CH and N decrease with added $CO_{2}$. It is found that NO emission behavior is considerably affected by chemical effects of added $CO_{2}$ and $H_{2}O$.

• Journal of Electrochemical Science and Technology
• /
• 제6권4호
• /
• pp.146-151
• /
• 2015

Here I report an electrochemical simulation work that compares voltammetric current and resistance of a complex electrochemical reaction over a potential scan. For this work, the finite element method is employed which are frequently used for voltammetry but rarely for impedance spectroscopy. Specifically, this method is used for simulation of a complex reaction where a heterogeneous faradaic reaction is followed by a homogeneous chemical reaction. By tracing the current and its polarization resistance, I learn that their relationship can be explained in terms of rate constants of charge transfer and chemical change. An unexpected observation is that even though the resistance is increased by the rate of the following chemical reaction, the current can be increased due to the potential shift of the resistance made by the proceeding faradaic reaction. This report envisions a possibility of the FEM-based resistance simulation to be applied to understand a complex electrochemical reaction. Until now, resistance simulations are mostly based on equivalent circuits or complete mathematical equations and have limitations to find proper models. However, this method is based on the first-principles, and is expected to be complementary to the other simulation methods.

• Bulletin of the Korean Chemical Society
• /
• 제6권5호
• /
• pp.280-284
• /
• 1985

Kinetic measurements of the 5-nitrofurfural-hydrazine reaction in various pH ranges of aquous solution were carried out by ultraviolet spectrophotometry at $25^{\circ},\;35^{\circ}\;and\;45^{\circ}C$. The observed rate of the reaction varies with the change in pH, which gives characteristic "bell-type" rate acidity profile. The maximum rate is shown in the vicinity of pH 4. This reaction procceds with rate-determining attack of hydrazine on the 5-nitrofurfural at low pH and undergoes a change in rate-determining step to dehydration of the addition intermediate as pH increases. The reaction has a "reactant-like transition state" which precedes intermediate in low pH and "product-like transition state" which follows it in neutral pH. The geometry of 5-nitrofurfural-hydrazine intermediate was estimated with PCILO method associated with CNDO/2 scheme.