• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.11 no.18
• /
• pp.27-34
• /
• 1988

This study is concerned with the development of the economic sampling inspection plan when it is possible to carry out a nondestructive screening inspection for the rejected lots by substitutive characteristics closely related to the original quality characteristic. It is assumed that the probabilities of those errors depend linearly on the fraction defective of the process sampling inspection policy for isolated lot is studied where the probability of accepting the lot with bad quality from the results of sampling inspection is restricted to be small.

• Particle and aerosol research
• /
• v.18 no.3
• /
• pp.61-68
• /
• 2022

In this study, a fluidized bed particle generator was developed to generate an aerosol without supply of compressed air and to increase portability. It was assumed that the mixing ratio of the test particles and beads, the input amount, and the air flow rate supplied to the generator would have effect on the aerosol generation characteristics. The product of these three parameters was set as a characteristic parameter and particle generation characteristics according to the change of the characteristic parameter were observed. As a result, it was confirmed that the input amount of test particles and beads was not suitable as a characteristic parameter and a characteristic parameter expressed as a product of the mass mixing ratio and the air flowrate was newly defined. When the new characteristic parameter is applied, it can be confirmed that the total amount of particles generated from the particle generator is a function of the characteristic parameter. As a result of measuring the amount of particle generation by adjusting the characteristic parameter, it was confirmed that the performance required for the test particle generator for the field inspection equipment of PM-2.5 sensors could be satisfied.

• Journal of Korean Society for Quality Management
• /
• v.28 no.1
• /
• pp.196-209
• /
• 2000

In order to intensify an enterprise competition, quality inspection controls are very important issue. An organization or division of a company hopes which to acquire the quality inspection information be updated in real-time with respect to shop floor. In this paper, we develop a quality inspection control system for a Turbine/Generator production industry. The system compromises inspection scheduling module related to shop floor control (SFC) system, formal documentation control module, and formal inspection control module. In the quality inspection control system, ORACLE RDBMS is used for the database management system and ORACLE DEVELOPER 2000 is used for system development tool. The characteristic of this system is to support so it can enhance productivity and quality through inspection plans related to production scheduling.

• Journal of Power System Engineering
• /
• v.14 no.4
• /
• pp.63-67
• /
• 2010

This paper introduces the eddy current signal characteristic of magnetic and non-magnetic gas turbine rotor. In the past, Magnetic particle inspection method was used in magnetic material for qualitative defect evaluation and the ultrasonic test method was used for quantitative evaluation. Nowadays, eddy current method is used in magnetic gas turbine rotor inspection due to advanced sensor design technology. We are studying on the magnetic gas turbine rotor by using eddy current method. We prepared diverse depth specimens made by magnetic and non-magnetic materials. We select optimum frequency according to material standard penetration data and experiment results. We got the signal on magnetic and non-magnetic material about 0.2 mm, 05 mm, 1.0 mm, 1.5 mm 2.0 mm and 2.5 mm depth defects and compare the signal amplitude and signal trend according to defect depth and frequency. The results show that signal amplitudes of magnetic are bigger than non-magnetic material and the trends are similar on every defect depth and frequency. The detection and resolution capabilities of eddy current are more effective in magnetic material than in non-magnetic materials. So, the eddy current method is effective inspection method on magnetic gas turbine rotor. And it has the merits of time saving and simple procedure by elimination of the ultrasonic inspection in traditional inspection method.

• International Journal of Quality Innovation
• /
• v.7 no.3
• /
• pp.58-69
• /
• 2006

This paper presents neural network-based recognition system for automatic light emitting diode (LED) inspection. The back-propagation neural network (BPNN) is proposed and tested. The current-voltage (I-V) characteristic data of LED from the inspection process is used for the network training and testing. This study selects 300 random samples as network training and employs 100 samples as network testing. The experimental results show that if the classification work is done well, the accuracy of recognition is 100%, and the testing speed of the proposed recognition system is almost one half faster than the traditional inspection system does. The proposed neural-network approach is successfully demonstrated by real data sets and can be effectively developed as a recognition system for a practical application purpose.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.335-338
• /
• 2004

In this study has developed analysis system for automatic inspection of FPD(Flat Panel Display) characteristic, such as brightness, view angle, color ratio in the manufacturing process. Developed system consists of inspection-sensor part, acquiring a data by 3-CCD Color CCD camera and Inspection-stage part, driving a FPD holder to rotation and tilt direction. In experiment results, we could have ensured easily brightness distribution, available view angle, color reproduce and could expect to improve the quality, productivity, and yield.

• Journal of the Korean Data and Information Science Society
• /
• v.15 no.4
• /
• pp.867-877
• /
• 2004

The sequential sampling inspection method is an extension of the multiple-sampling methods, and its theory is based on the sequential probability ratio test (SPRT) of Wald. In this paper, the characteristics of SPRT for testing the number of defects are approximated by using the estimated excess over the boundaries. The use of the estimated excess shows good performances in estimating the operating characteristic function and the average sample number of SPRT compared to the method by neglecting the excess. It also makes it possible to determine the boundary values which satisfy the desired error probabilities.

• The Korean Journal of Applied Statistics
• /
• v.6 no.2
• /
• pp.277-287
• /
• 1993

This paper is a generalization of single- and two-level skip-lot sampling plans to n-level, which can considerably reduce inspection cost when the level of submitted quality is high. In every skipping inspection of the generalized sampling plan, not only skipping parameters but also inspection fractions can be freely choosed. The general formula of the operating characteristic function for the n-level skip-lot sampling plan is derived. Also the operating characteristic curves of a reference plan, two-level and three-level skip-lot sampling plans are compared.

• Journal of Auto-vehicle Safety Association
• /
• v.9 no.4
• /
• pp.20-25
• /
• 2017

Dynamo based vehicle inspection device is end of line device for automobile industry. The device is utilized as implementing vehicle functionality inspection such as brake force, cruise control, kick-down acceleration, CAN inspection. As dynamo based inspection device is broadly adopted in automobile industry, the dynamic study is required to verify the vehicle test equipment reliability. This research recommends appropriate dynamic brake force inspection procedure and theoretical background for developed equipment. Dynamic characteristic of brake force implementation to roller is simplified. With simplified characteristics, the indirect brake force measurement strategy is developed and adopted. Comparison of each brake force result, the appropriate brake force inspection criterion is given.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.18 no.34
• /
• pp.185-191
• /
• 1995

In this research, a mathematical programming model is developed for the economic modeling of sampling plans based on two evaluation criteria : the outgoing quality and the average total inspection cost A fuzzy goal programming model and its solution procedure are proposed for the managers whose management objectives on the two evaluation criteria are not rigorous. To study the sensitivity of quality characteristic dependence on the resulting inspection plans, a numerical example is solved several times for a dependent model.