• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.716_717
• /
• 2009

This paper deals with the characteristic analysis & optimum design of Permanent Magnet Assisted Synchronous Reluctance Motor(PMASynRM) for Premium Efficiency Performance. The focus of this paper is characteristic analysis of d and q-axis inductances and torque according to magnetizing quantity of interior permanent magnet for PMASynRM. The d and q-axis current component ratios, load angles of a PMASynRM are investigated quantitatively on the basis of the proposed analysis method and the experimental test. Comparisons are given with output characteristic curves of normal SynRM and those according to the load in PMASynRM, respectively. And optimum design of PMASynRM is performed by Response Surface Methodology(RSM).

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2006년도 하계학술대회
• /
• pp.35-38
• /
• 2006

Using the repeaters is indispensable to WiBro services. Repeater types are distinguished by usage, output power and required performance. In the paper, we have studied on the WiBro digital optic repeater design which has excellent performance characteristic than any other repeaters. WiBro has specific characteristic on modulation method TDD(Time Division Duplex)/OFDMA(Orthogonal Frequency Division Multiple Access) so that it demands specified H/W to design WiBro repeater. Switching technique has been introduced because of TDD characteristic in each amplifier on the repeater. Time Advance technique has been considered because of OFDM characteristic among RAS(Radio Access Station) and repeater. In this paper, we have studied on these techniques to increase repeater cell coverage and distance between RAS and repeater.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 B
• /
• pp.641-643
• /
• 2000

Because of high torque and easiness of speed control, Direct Current(DC) motors are used long time. But, its applications are limited in circumstance and performance, since they contained brush and commutator. The commutation characteristic gives effect to life and performance of DC motor. Naturally, the commutation characteristic analysis is strongly required. In this paper, With the result of finite element analysis. The inductance is calculated each rotor position and applied to the voltage equations coupled with commutation equation. The time derivative term in the differential equation is solved in time difference method. This algorithm was applied to 2-pole shunt DC motor. We considered commutation characteristic by changing contact resistance between brush and commutator segment.

• 전기학회논문지
• /
• 제62권1호
• /
• pp.57-62
• /
• 2013

Because of high torque and easiness of speed control, Direct Current(DC) motors have been used for a long time. But, its applications are limited in circumstance and performance, since they contained brush and commutator. The commutation characteristic gives effect to life and performance of the DC motor. Naturally, the commutation characteristic analysis is strongly required. In this paper, With the result of finite element analysis, The inductance is calculated each rotor position and applied to the voltage equations coupled with commutation equation. Also, contact resistances of brush/commutator assembly are considered using contact area and brush width converted with commutator segments. The time derivative term in the differential equation is solved in time difference method. This algorithm was applied to 2-pole shunt DC motor. We considered commutation characteristic by changing contact resistance between brush and commutator segment.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2005년도 연구개발 발표회 논문집
• /
• pp.331-337
• /
• 2005

This study aims at evaluation of component performance of a commercial micro gas turbine by detailed measurements of various system parameters. A test facility to measure performance of a micro gas turbine was set up. Performance parameters such as turbine exit temperature, exhaust gas temperature, engine inlet temperature, compressor discharge pressure and fuel flow rate were measured. Variations in measured data and estimated performance parameters were analyzed. In addition to overall engine performance, component characteristic parameters including the turbine inlet temperature, the compressor efficiency, the turbine efficiency, the recuperator effectiveness were estimated. Behaviors of the estimated characteristic parameters with operating condition change were examined.

• 전기학회논문지
• /
• 제60권1호
• /
• pp.50-62
• /
• 2011

In this paper, analytical techniques for performance characteristics analysis of wind power generator with outer permanent magnet rotor are proposed. Furthermore, the proposed analytical techniques are validated by performance experiments of the manufactured generator. In this part, characteristic equations of losses such as copper loss, core loss are derived. Using the derived loss characteristic equations, electrical parameters obtained in [15] and d-q axes method, constant load and constant speed characteristics of wind power generator are analyzed. And then, to analyze performance of wind power system according to wind speed, d-q analysis model considering wind turbine characteristics is proposed. Finally, the obtained performance characteristics results are validated in comparison with those by experiments.

• 방송공학회논문지
• /
• 제5권2호
• /
• pp.211-219
• /
• 2000

IBAC DAB 시스템은 기존의 FM 방송 대역내의 가드밴드를 사용하게 됨에 따라 기존의 FM 방송신호로 인해 간섭을 받게 된다. IBAC(In Band Adjacent Channel) DAB 시스템의 성능평가에 있어서 FM 간섭신호는 중요한 요소가 된다. 국내 FM 공중파 방송신호를 실제 측정하여 수시로 변하는 FM 스펙트럼의 특성과, FM 채널 특성에 따라 FM 신호의 평균적인 스펙트럼의 특성을 구하였다. 본 논문에서는 제안한 IBAC DAB 시스템을 기반으로 한 이런 다양한 FM 간섭신호를 C로 모델링하여 IBAC DAB 시스템의 성능과 점유 대역폭에 따른 FM 간섭의 영향을 분석하고, 본 시스템의 성능이 유지될 수 있는 FM 간섭비를 제시한다. 실험결과 FM PSD의 평균 특성에 따라 IBAC DAB 시스템의 성능변화가 크며, 시스템의 성능이 유지 될 수 있는 FM 간섭 혼신비가 10dB임을 알 수 있었다.

• 한국추진공학회지
• /
• 제18권1호
• /
• pp.42-49
• /
• 2014

설계성능이 검증된 70 N급 하이드라진 추력기에 대한 성능평가 시험이 수행되었다. 각각의 개발모델 추력기는 추력실 직경 변화에 따라 펄스모드로 연소시험이 수행되었으며, 비추력, 임펄스 비트 및 특성속도 등의 성능변수로 평가되었다. 추력실 직경의 증가와 감소에 따라 비추력과 특성속도가 감소하였으며, 성능평가 결과 표준모델의 성능특성이 가장 우수한 것으로 확인되었다.

• 한국생산제조학회지
• /
• 제23권2호
• /
• pp.186-193
• /
• 2014

This paper presents characteristic analysis of underwater bearing for canned type electric water pump. Characteristic analysis of underwater bearing was performed using self-developed performance tester, which capable of torque change, noise change, motor speed change and abrasion loss test with respect to temperature change of underwater bearing. The performance tester can be monitored in real time by designing the control unit using the Labview program. The performance experiment was performed through comparison of the silicon carbide (SIC) and the carbon bearing. From the experiment results, performance of SIC bearing was better than carbon bearing at the abrasion and temperature experiment.

• 동력기계공학회지
• /
• 제17권6호
• /
• pp.88-94
• /
• 2013

As the results of analysis that are applying a heat pump using underground water as heat source of facility horticulture house, temperature change in house, growth of cultivated plants and the crop characteristic, the conclusion can be acquired as follows. It was possible to maintain the chamber temperature through operating heat pump with setting goal temperature at $16^{\circ}C$ and temperature variation at ${\pm}3^{\circ}C$. And cooling and heating coefficient of performance in heat pump system are different from setting room temperature and operation condition of equipment, totally in case that the setting temperature in house is low, the coefficient of performance and the in case that temperature departure is low. In case that the house does not heated, the result of the growth characteristic of cucumber planted last 50days is that cucumber grown in house equipped with heat pump is the most favorable growth characteristic due to maintaining a constant room temperature. After 90 days, the quantity and weight cucumber harvested in each house are averagely 9.8%, 13.1% increase and more heavy weight respectively. So it is researched that crop characteristic is superior.