• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.10
• /
• pp.1196-1202
• /
• 2007

In this paper, the effects of performance improvement far the OFDM based satellite communications are analyzed with applying the CI(Carrier Interferometry)-OFDM and channel coding scheme considering the group delay and gain ripple characteristic as well as the nonlinear characteristic of the transponder. Comparing the BER between traditional OFDM and CI-OFDM, the degree of performance improvement is presented in AWGN channel environments for specified backoff condition of HPA. The simulations are performed with the 36 MHz bandwidth of transponder channel, 120 Mbps transmission rate, and 16 QAM modulation scheme between ideal and worst case condition. It is shown that the improvement measure by the CI-OFDM and channel coding for the group delay and nonlinear characteristic outperforms that for the gain ripple in terms of performance degradation presented by the individual characteristics. And the simulation results show that the effects of improvement by the CI-OFDM outperforms the effect by the applied channel coding, particularly in worst case condition.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.11
• /
• pp.1402-1405
• /
• 2016

In this paper, we develop an interference neutralization (IN) method based on a set of multi-antenna relays for K-user interference channel. The feasibility condition for IN is fully characterized. We further provide a relaxed IN method for the cases in which there are not enough relays to satisfy the feasibility condition.

• Water Engineering Research
• /
• v.6 no.4
• /
• pp.149-159
• /
• 2005

With increasing recognition on conservation of endangered species in Taiwan, one of the major conservation projects is the habitat restoration of Formosan Landlocked Salmon which is major threatened by check dams in the channel for their blockading pathway to upstream and causing the problems of population isolation and close-blood mating. By creating an opening in the central dam body appropriately, partial removal dams can provide pathway for the fish for the better upstream channel habitat. Four check dams at Gau-Shan Creek were remodeled between April of 1999 and September of 2002 with information supported from model experiments under certain hydraulic condition of field environment. Based on the follow-up investigation, the channel morphology of observation sections is in stable condition and the total number of Formosan Landlocked Salmon in this creek increased promptly at the reach containing partial-removed dams.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.4 no.2
• /
• pp.13-24
• /
• 1998

This study aims at examining the safety of the would-be approach channel of LNG Terminal at Kwangyang Harbour, by utilizing Captains 2000 port-design simulator. Six competent shipmasters or navigators participated in this study. The developed model ship was a 70,200DWT (138,000m3) LNG carrier. The environmental conditions were maximum flood-and-ebb current condition and wind condition. To evaluate the navigational safety, two categories were analyzed, which were measures of vessel's proximity and shiphandler's subjective evaluations. With respect to the effects of the worst environmental conditions on transit safety, it was concluded that the would-be approach channel was safe on basis of the support of four tugs of 3,200hp or more and current speed of 0.5knots or less.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.26 no.1
• /
• pp.66-73
• /
• 2021

This study presents a novel four-channel light-emitting diode (LED) current balancing topology using a current-fed hybrid quasi-Z-source converter. With the proposed structure, currents flowing through four LED strings are automatically balanced owing to the charge (amp-sec) balance condition on capacitors. Thus, automatic current balancing of the proposed driver is simple and precise. In addition, the proposed LED driver uses only one active switch and three diodes. The operating principle and characteristics of the proposed four-channel LED driver are analyzed in detail. To verify the operation of the proposed LED driver, a prototype is built and tested with different numbers of LEDs.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.11
• /
• pp.5223-5242
• /
• 2017

In the last decade, the 2.4 GHz band of IEEE 802.11 WLANs has become heavily congested due to the explosive increase in demand of Wi-Fi connectivity. With the current deployment of enterprise WLANs, channel switching mechanism continues to exhibit inefficiencies because it cannot adapt to real-time channel condition and the inability to support seamless channel switching. Software Defined Networking (SDN) as an emerging architecture is promising to introduce flexibility and programmability for wireless network management. Leveraging SDN to existing enterprise WLANs, channel switching method can be improved significantly. This paper presents a software-defined enterprise WLAN framework with a load aware automatic channel switching solution, which utilizes AP load and channel interference factor (CIF) to provide seamless channel switching. Two automatic channel switching algorithms named Single Switch (SS) and Double Switch (DS) are proposed to improve the overall user experience and the experience of users with highest traffic load respectively. Experiment results demonstrate that our solution can efficiently improve user experience in terms of jitter, transmission delay and network throughout when compared to the conventional channel switching mechanism.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2007.06a
• /
• pp.759-760
• /
• 2007

• International Journal of Computer Science & Network Security
• /
• v.23 no.5
• /
• pp.172-178
• /
• 2023

In this paper, performance of autoencoder based OFDM communication systems is compared with IEEE 802.11a Wireless Lan System (Wi-Fi). The proposed autoencoder based OFDM system is composed of the following steps. First, one sub-carrier's transmitter - channel - receiver system is created by autoencoder. Then learning process of the one sub-carrier autoencoder generates constellation map. Secondly, using the plural sub-carrier autoencoder systems, parallel bundle is configured with inserting IFFT and FFT before and after the channel to configure OFDM system. Finally, the receiver part of the OFDM communication system was updated by re-learning process for adapting channel condition such as multipath channel. For performance comparison, IEEE802.11a and the proposed autoencoder based OFDM system are compared. For channel estimation, Wi-Fi uses initial long preamble to measure channel condition. but Autoencoder needs re-learning process to create an equalizer which compensate a distortion caused by the transmission channel. Therefore, this autoencoder based system has basic advantage to the Wi-Fi system. For the comparison of the system, additive random noise and 2-wave and 4-wave multipaths are assumed in the transmission path with no inter-symbol interference. A simulation was performed to compare the conventional type and the autoencoder. As a result of the simulation, the autoencoder properly generated automatic constellations with QPSK, 16QAM, and 64QAM. In the previous simulation, the received data was relearned, thus the performance was poor, but the performance improved by making the initial value of reception a random number. A function equivalent to an equalizer for multipath channels has been realized in OFDM systems. As a future task, there is not include error correction at this time, we plan to make further improvements by incorporating error correction in the future.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.34D no.8
• /
• pp.35-40
• /
• 1997

To suppress the short channel effects in nMOSFET with 0.1.mu.m channel length, we have fabricated and characterized the ISRC n MOSFET with several process condition. When the recess oxide thickness is 100nm and the channel dose for threshold voltge adjustment is 6*10$^{12}$ /c $m^{-2}$ , B $F_{2}$$^{+}$, the maximum transconductance at $V_{DS}$ =2.0V is 455mS/mm and the BIDL is kept within 67mV. By comparing the ISRC n MOSFET with the conventioanl SHDD (shallowly heavily dopped drain) nMOSFET, we verify the suppression of short channel effects ISRC structure.e.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.33 no.11
• /
• pp.1267-1273
• /
• 2009

Hot press forming can produce high-strength components by rapidly cooling between closed punch and die after hot forming using quenchable boron steel austenized in a furnace. In the hot press forming process, the cooling rate is influenced by the size, position and arrangement of the cooling channel and the file condition of cooling water in the die. Also, mechanical properties of the final components and operation time are related to cooling rate. Therefore, the design of optimized cooling channel is one of the most important works. In this paper, the effect of position and size of the cooling channel on the cooling rate was investigated by using design of experiment and FE analysis in hot press bending process. Therefore the optimum cooling channel ratio was presented in the HPB.