Transactions of the Korean Society of Mechanical Engineers A (대한기계학회논문집A)

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지
DOI QR코드

DOI QR Code

Evaluation of Design Parameters for Optimizing the Cooling Channel in Hot Press Bending Process

핫 프레스 벤딩 공정에서 냉각회로 최적화를 위한 공정변수의 평가

  • Published : 2009.11.01
Download PDF
⟨ Previous Next ⟩

Abstract

Hot press forming can produce high-strength components by rapidly cooling between closed punch and die after hot forming using quenchable boron steel austenized in a furnace. In the hot press forming process, the cooling rate is influenced by the size, position and arrangement of the cooling channel and the file condition of cooling water in the die. Also, mechanical properties of the final components and operation time are related to cooling rate. Therefore, the design of optimized cooling channel is one of the most important works. In this paper, the effect of position and size of the cooling channel on the cooling rate was investigated by using design of experiment and FE analysis in hot press bending process. Therefore the optimum cooling channel ratio was presented in the HPB.

Keywords

References

  1. Kim, H. G., Son, H. S. and Park, S. H., 2006, 'Development of Thermal-Mechanical Coupled Simulation Skill for Hot Press Forming Tool Design,' Posco Technical Report, Vol. 10, No. 1, pp. 115-123
  2. Yum, Y. G., Kim, J. G., Lee, H. W., Hwang, J. B., Kim, S. U., Kim, W. H. and Yoo, S. J., 2008, 'Development of Vehicle Door Impact Beam by Hot Stamping,' The Korean Society of Mechanical Engineers, Fall Conference, pp. 7-12
  3. Lee, J. S., Chae, M. S., Park, C. D. and Kim, Y. S., 2007, 'Mechanical and microstructural characteristics of a High-Strength Boron-Alloyed Steel For Hot Press Forming,' The Korean Society of Mechanical Engineers, Spring Conference, pp. 344-349
  4. Chae, M. S., Lee, G. D., Suh, Y. S., Lee, K. H. and Kim, Y. S., 2009, 'Mechanical and Forming Characteristics of High-Strength Boron-Alloyed Steel with Hot Forming,' Transactions of Meterials Processing, Vol. 18, No. 3, pp. 236-241 https://doi.org/10.5228/KSPP.2009.18.3.236
  5. Bariani, P. F., Bruschi, S., Ghioti, A. and Turetta, A., 2008, 'Testing Formability in the Hot Stamping of HSS,' CIRP Annals-Manufacturing Technology, Vol. 57, pp. 265-268 https://doi.org/10.1016/j.cirp.2008.03.049
  6. Hoffmann, H., So, H. and Steinbeiss, H., 2007, 'Design of Hot Stamping Tools with Cooling System,' Annals of the CIRP, Vol. 56/1, pp. 269-272 https://doi.org/10.1016/j.cirp.2007.05.062
  7. So, H., Steinbeiss, H. and Hoffmann, H., 2006, 'Entwicklung einer Methodik zur Optimierung von Umformwerkzeugen fur die Warmblechumformung,' Bereichs-und Industriekolloquium, 1. Erlanger Workshop Warmblechumformung, pp. 102-117
  8. Weinert, K., Mehnen, J., Michelitsch, T. and Bartz-Beielstein, T., 2004, 'A Multiobjective Approach to Optimize Temperature Control Systems of Molding Tools,' Production Engineering, XI/1, pp. 77-80
  9. Saunders, N., Guo, Z., Miodownik, P. and Schille, J. P., 2006, 'Modelling of High Temperature Mechanical Properties and Density Change of Steelsduring Solidification,' Materials Science and Technology MS&T
  10. Guo, Z., Saunders, N., Schille, J. P. and Miodownik, A. P., 2009, 'Material Properties for Process Simulation,' Materials Science and Engineering A. 499, pp. 7-13 https://doi.org/10.1016/j.msea.2007.09.097
  11. Saunders, N., Guo, Z., Miodownik, P. and Schille, J. P., 2006, 'The Calculation of TTT and CCT Diagrams for General Steels,'
  12. Geiger, M., Merklein, M. and Lechler, J., 2008, 'Determination of Tribological Conditions within Hot Stamping,' Prod. Eng. Res. Devel. 2, pp. 269-276 https://doi.org/10.1007/s11740-008-0110-8
  13. Kwon, O. B., Bae, D. S., Kim, S. B., Son, Y. S., Kim, Y. P. and Jeon, C. H., 2006, 'Heat transfer,' Publication intervision, pp. 353-408, 783-810
  14. Steinbeiss, H., So, H. W., Michelitsch, T. and Hoffmann, H., 2007, 'Method for Optimizing the Cooling Design of Hot Stamping Tools,' Prod. Eng. Res. Devel, 1, pp. 149-155 https://doi.org/10.1007/s11740-007-0010-3
  15. Cho, U. S., 1997, 'The Mold Design Technique for the Injection Molding,' Gijeon, pp. 463-499