DOI QR코드

DOI QR Code

4-Channel LED Current Balancing Scheme Using C-Fed Hybrid Quasi-Z-Source Converter

전류형 하이브리드 Quasi-Z-Source 컨버터를 이용한 4-채널 LED 전류 밸런싱 기법

  • Hong, Daheon (School of Energy Engineering, Kyungpook National University) ;
  • Cha, Honnyong (School of Energy Engineering, Kyungpook National University)
  • Received : 2020.11.23
  • Accepted : 2020.12.24
  • Published : 2021.02.20

Abstract

This study presents a novel four-channel light-emitting diode (LED) current balancing topology using a current-fed hybrid quasi-Z-source converter. With the proposed structure, currents flowing through four LED strings are automatically balanced owing to the charge (amp-sec) balance condition on capacitors. Thus, automatic current balancing of the proposed driver is simple and precise. In addition, the proposed LED driver uses only one active switch and three diodes. The operating principle and characteristics of the proposed four-channel LED driver are analyzed in detail. To verify the operation of the proposed LED driver, a prototype is built and tested with different numbers of LEDs.

Keywords

Acknowledgement

본 연구는 산업통상자원부(MOTIE)와 한국에너지기술평가원(KETEP)의 지원을 받아 수행한 연구과제입니다. (No. 20194030202310)

References

  1. H. Chiu and S. Cheng, "LED backlight driving system for large-scale LCD panels," IEEE Transactions on Industrial Electronics, Vol. 54, No. 5, pp. 2751-2760, Oct. 2007. https://doi.org/10.1109/TIE.2007.899938
  2. W. Yu, J. Lai, H. Ma, and C. Zheng, "High-efficiency DC-DC converter with twin bus for dimmable LED lighting," IEEE Transactions on Power Electronics, Vol. 26, No. 8, pp. 2095-2100, Aug. 2011. https://doi.org/10.1109/TPEL.2011.2104368
  3. R. Sangrody, M. Pouresmaeil, M. Marzband, and E. Pouresmaeil, "Resonance-based optimized buck LED driver using unequal turn ratio coupled inductance," IEEE Transactions on Power Electronics, Vol. 35, No. 12, pp. 13068-13076, Dec. 2020. https://doi.org/10.1109/TPEL.2020.2990492
  4. K. I. Hwu, W. C. Tu, and M. J. Hong, "A dimmable LED driver based on current balancing transformer with magnetizing energy recycling considered," Journal of Display Technology, Vol. 10, No. 5, pp. 388-395, May 2014. https://doi.org/10.1109/JDT.2014.2301883
  5. C. S. Wong, K. H. Loo, H. H. Iu, Y. M. Lai, M. H. L. Chow, and C. K. Tse, "Independent control of multicolor-multistring LED lighting systems with fully switched-capacitor-controlled LCC resonant network," IEEE Transactions on Power Electronics, Vol. 33, No. 5, pp. 4293-4305, May 2018. https://doi.org/10.1109/TPEL.2017.2713943
  6. Y. Lin, H. Chiu, Y. Lo, and C. Leng, "LED backlight driver circuit with dual-mode dimming control and current-balancing design," IEEE Transactions on Industrial Electronics, Vol. 61, No. 9, pp. 4632-4639, Sep. 2014. https://doi.org/10.1109/TIE.2013.2288234
  7. Y. Lin, H. Chiu, Y. Lo, and C. Leng, "Light-emitting diode driver with a combined energy transfer inductor for current balancing control," IET Power Electronics, Vol. 8, No. 10, pp. 1834-1843, Sep. 2015. https://doi.org/10.1049/iet-pel.2014.0810
  8. K. I. Hwu and W. Z. Jiang, "Nonisolated two-channel LED driver with automatic current balance and zero-voltage switching," IEEE Transactions on Power Electronics, Vol. 31, No. 12, pp. 8359-8370, Dec. 2016. https://doi.org/10.1109/TPEL.2016.2515088
  9. J. Kim, J. Choe, and J. J. Lai, "Nonisolated single-switch two-channel LED driver with simple lossless snubber and low-voltage stress," IEEE Transactions on Power Electronics, Vol. 33, No. 5, pp. 4306-4316, May 2018. https://doi.org/10.1109/TPEL.2017.2722985
  10. D. Do, H. Cha, B. L. Nguyen, and H. Kim, "Two-channel interleaved buck LED driver using current-balancing capacitor," IEEE Journal of Emerging and Selected Topics in Power Electronics, Vol. 6, No. 3, pp. 1306-1313, Sep. 2018. https://doi.org/10.1109/JESTPE.2018.2845858
  11. F. Z. Peng, "Z-source inverter," IEEE Transactions on Industry Applications, Vol. 39, No. 2, pp. 504-510, Mar./Apr. 2003. https://doi.org/10.1109/TIA.2003.808920
  12. H. Shen, B. Zhang, D. Qiu, and L. Zhou, "A common grounded Z-source DC-DC converter with high voltage gain," IEEE Transactions on Industrial Electronics, Vol. 63, No. 5, pp. 2925-2935, May 2016. https://doi.org/10.1109/TIE.2016.2516505
  13. H. Zeng and F. Z. Peng, "SiC-based Z-source resonant converter with constant frequency and load regulation for EV wireless charger," IEEE Transactions on Power Electronics, Vol. 32, No. 11, pp. 8813-8822, Nov. 2017. https://doi.org/10.1109/TPEL.2016.2642050
  14. S. Rostami, V. Abbasi, and F. Blaabjerg, "Implementation of a common grounded Z-source DC-DC converter with improved operation factors," IET Power Electronics, Vol. 12, No. 9, pp. 2245-2255, Jul./Aug. 2019. https://doi.org/10.1049/iet-pel.2018.6044
  15. J. Anderson and F. Z. Peng, "Four quasi-Z-source inverters," in 2008 IEEE Power Electronics Specialists Conference, Rhodes, pp. 2743-2749, 2008.
  16. H. Shen, B. Zhang, and D. Qiu, "Hybrid Z-source boost DC-DC Converters," IEEE Transactions on Industrial Electronics, Vol. 64, No. 1, pp. 310-319, Jan. 2017. https://doi.org/10.1109/TIE.2016.2607688
  17. D. Hong and H. Cha, "New LED current balancing scheme using c-fed Z-source converter," The Transactions of the Korean Institute of Power Electronics, Vol. 26, No. 1, pp. 9-15, Feb. 2021. https://doi.org/10.6113/TKPE.2021.26.1.9