• KIEAE Journal
• /
• 제6권1호
• /
• pp.11-16
• /
• 2006

This paper deals with the experimental for manufacturing the lightweight buildng materials with portland cement, fly ash, slag, lime, gypsum, and aluminum powder system. Aluminum powder was added an aerating agent. Specific gravity range of lightweight concrete specimens were 0.6~0.9g/cm3. These specimens properties studied by means of specific gravity, compressive strength, absorption coefficient, transmission loss and scanning electron microscopy. Cellular concrete with maximum compressive strength was 41kgf/cm2 by obtained Al=0.05wt.%. Moreover, the aeration lightweight concrete showed excellent sound absorption properties.

• 대한치과기공학회지
• /
• 제46권1호
• /
• pp.15-19
• /
• 2024

An ideal post material should have physical properties similar to those of dentin. Post materials with high elastic moduli may cause root fractures. This clinical report describes the treatment of a severely damaged tooth using a recently introduced material. Polyetherketoneketone (PEKK) is a semicrystalline high-performance thermoplastic polymer. PEKK is a promising material for custom post-and-core fabrication because of its elasticity close to that of dentin, good shock absorbance, machinability, and low cost. A laboratory scanner was used to digitize the conventional impression of a severely damaged maxillary right first molar. A custom PEKK post-and-core was designed and milled using computer-aided design and computer-aided manufacturing technology. Using the proposed technique, a custom PEKK post-and-core was fabricated accurately and human error was reduced. Restoration was luted with resin cement. Custom PEKK post-and-core restorations are a viable alternative for treating severely damaged teeth.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1999년도 학회창립 10주년 기념 1999년도 가을 학술발표회 논문집
• /
• pp.267-270
• /
• 1999

In this paper, the application of limestone powder, which produced by being gathered electrically in the process of manufacturing of cement, to high fluidity concrete are investigated. According to the experimental results, especially, high viscosity and the loss of air content are accomplished by applying limestone powder as the partial substitution of fine aggregates. In case of hardened concrete, high compressive strength can be achieved by using limestone powder.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 봄 학술발표회 논문집
• /
• pp.635-640
• /
• 2001

Recently, it has been processed to study about recycled aggregate but a study about using of recycled powder is producted when manufacturing recycled aggregate has not been acted. So in this study on the fundamental properties and application as cementious admixture by heating temperature for mortar properties of recycled powder and sand is obtained like following results. It is judged that application of recycled powder of heat treatment on $600^{\circ}C$ and cement replacement ratio below 10% is available.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 추계 학술발표회 제17권2호
• /
• pp.753-756
• /
• 2005

Recently, the alkali activation of Fly-ash has become a significant field of research because it is possible to use these materials having highly chemical reaction property. Also, the product does not generate CO2 gas, unlike ordinary Portland cement(O.P.C). Therefore, the purpose of this paper is to design for improving mechanical and chemical properties using Fly-ash and Meta-kaolin. And additive(CaO) affected to control the strength behaviors and shrinkage rate.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2009년도 춘계 학술대회 제21권1호
• /
• pp.269-270
• /
• 2009

Precast Concrete 모의부재를 제조할 때 사용시멘트 및 가열양생조건이 각각 다른 콘크리트부재의 강도특성을 총괄적으로 검토했다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2009년도 춘계 학술대회 제21권1호
• /
• pp.267-268
• /
• 2009

Precast Concrete 모의부재를 제조할 때 사용시멘트 및 가열양생조건이 각각 다른 콘크리트부재의 온도이력특성을 총괄적으로 검토했다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1992년도 봄 학술발표회 논문집
• /
• pp.99-104
• /
• 1992

There is a limit manufacturing precast products for the construction industry using conventional cement concrete and precast iron due to many reasons. Therefore, precast product technologies using polymer concrete are widely developed across the world because using polymer concrete can be over come this limitation. This study reviewed and analyzed the trends of development and practical usages of ploymer concrete precast products in foreign countries based on selected literatures. It was observed that polymer concrete precast products have been widely used as utility structures wall and slab members. decoration products, traffic products, hydraulic structures and industry equipments.

• 한국건설순환자원학회논문집
• /
• 제2권2호
• /
• pp.166-171
• /
• 2014

기포콘크리트의 재료 중 시멘트는 제조과정 중에 $CO_2$를 다량 발생시키기 때문에 지구 환경적인 측면에서 커다란 문제가 되고 있지만, 아직까지 시멘트를 대체할 수 있는 대체재에 대한 연구 개발이 미흡한 실정이다. 또한, 발포제는 압축강도가 낮고 고가인 단점이 있다. 이 때문에 강도와 경량 등의 성능 개선과 친환경적인 재료의 사용이 필요한 실정이다. 이에 본 연구에서는 시멘트와 발포제를 대체하기 위해 고로슬래그와 제지애시를 사용하여 경량 경화체를 제조하고자 하였으며, 강도 및 경량성을 보완하기 위해 플라이애시와 폴리실리콘 슬러지를 사용하여 실험을 실시하였다. 그 결과, 플라이애시를 사용한 경화체는 Plain 보다 낮은 밀도를 나타내었으나 강도보완에는 취약하였으며, 폴리실리콘 슬러지를 사용한 경우는 3%치환한 경화체가 압축강도는 Plain보다 다소 낮지만 겉보기 밀도의 감소가 큰 것으로 나타났다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제18권4호
• /
• pp.92-98
• /
• 2014

본 연구는 환경부하 저감을 위해 슬래그 시멘트를 사용하고 플라스틱 섬유보강재(폴리프로필렌, 나일론, 유리섬유)를 혼입하여 고강도 간격재를 개발하고 현장적용성을 평가하는 연구이다. 이를 위해 예비실험을 통하여 4가지 섬유 복합재의 첨가량이 결정되었다. 또한 역학적 시험(압축, 휨, 인장) 및 내구성 시험(흡수율, 투수율, 길이변화율, 균열저항성, 탄산화, 동결융해)을 통하여 최적의 섬유재를 도출하였으며, 이를 이용한 고강도 섬유재 간격재의 배합 및 생산시스템을 개발하였다. 또한 현장적용성 평가를 통하여 개발된 간격재의 구체 콘크리트 일체성을 확인하였다.