• The Transactions of the Korean Institute of Power Electronics
• /
• v.10 no.5
• /
• pp.443-449
• /
• 2005

In this paper, parallel operation systems with Z-source Inverters for the fuel cell systems are discussed. The carrier phase shifted SPWM(Sinusoidal Pulse Width Modulation) has an advantage in reducing harmonics of output current. However when this technique applies in parallel operation of Z-source inverters, it additionally produces circulating currents. The circulating current is analyzed and a method to prevent the circulating current is applied to the parallel operation systems of Z-source inverters. To maintain high performance with reduced circulating current in inverter output and low harmonic components in load current, circulating current reactors are used. The proposed approach is verified through simulation and experiment.

• Journal of Microbiology and Biotechnology
• /
• v.22 no.2
• /
• pp.270-273
• /
• 2012

These studies were conducted to determine the effects of various concentrations of ammonium and nitrate on current generation using dual-cathode microbial fuel cells (MFCs). Current generation was not affected by ammonium up to $51.8{\pm}0.0$ mg/l, whereas $103.5{\pm}0.0$ mg/l ammonium chloride reduced the current slightly. On the other hand, when $60.0{\pm}0.0$ and $123.3{\pm}0.1$ mg/l nitrate were supplied, the current was decreased from $10.23{\pm}0.07$ mA to $3.20{\pm}0.24$ and $0.20{\pm}0.01$ mA, respectively. Nitrate did not seem to serve as a fuel for current generation in these studies. At this time, COD and nitrate removal were increased except at $123{\pm}0.1$ mg ${NO_3}^-/l$. These results show that proper management of ammonium and nitrate is very important for increasing the current in a microbial fuel cell.

• Proceedings of the Korean Society of Plant Biotechnology Conference
• /
• 2002.04a
• /
• pp.91-99
• /
• 2002

• Proceedings of the Korean Society of Plant Biotechnology Conference
• /
• 2002.04b
• /
• pp.91-99
• /
• 2002

• Proceedings of the KSME Conference
• /
• 2001.06d
• /
• pp.703-707
• /
• 2001

A performance analysis of a SOFC/MGT hybrid system has been carried out for concept design. Thermo-dynamic models for each component being able to describe electrochemical characteristics and heat and mate-rial balance are proposed. Estimated is the power capacity of a SOFC suitable for the hybrid operation with a 5kW class MGT. Effects of current density and operating pressure are also investigated. Electric efficiency showed weak dependence on operating pressure and current density. It is desirable that the SOFC operates at high current density in manufacturing cost's point of view though operating with high current density slightly decreases the electric efficiency find specific power.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.16 no.3
• /
• pp.133-140
• /
• 2007

A 2-D model of fluid flow, mass transport and electrochemistry is analysed to examine the effect of current density at the current collector depending on active layer thickness of catlyst in polymer elecrolyte fuel cells. The finite element method is used to solve the continuity, potential and Maxwell-Stefan equations in the flow channel and gas diffusion electrode regions. For the material behavior of electrode reactions in the active catalyst layers, the agglomerate model is implemented to solve the diffusion-reaction problem. The calculated model results are described and compared with the different thickness of active catalyst layers. The significance of the results is discussed in the viewpoint of the current collecting capabilities as well as mass transportation phenomena, which is inferred that the mass transport of reactants dictates the efficiency of the electrode in the present analysis.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2002.11a
• /
• pp.277-279
• /
• 2002

This paper is an experimental research of the design of a cell battery charger using switching methods. The developed charger in this paper can do both the equalizing current charge and floating charge. Also, it is easily transferable. Power MOS FET was used for the full bridge converter of the charger, and ZVS was applied for the switching method of the converter. Also, Customized IC was used for the control circuit in order to simplify ZVS mode. The setting current and floating current used for the charger were designed by using OP AMP. Based on the process provided by the current research, a sample converter with the power rating of 5KVA was developed and is field-testing to improve its validity and stability.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1272-1273
• /
• 2008

PRAM(Phase change access memory) has desirable characteristics including high speed, low cost, low power, and simple process. PRAM is based on the reversible phase transition between resistive amorphous and conductive crystalline states of chalcogenide. However, PRAM needs high reset current for operation. PRAM have to reduce reset current for high density and competitiveness. Therefore, we have investigated the reset current of PRAM with top electrode contact hole size using 3-D finite element analysis tool in this paper.

• Proceedings of the KIPE Conference
• /
• 2005.07a
• /
• pp.677-681
• /
• 2005

This Paper presents a 6 pulse shift operation control mode of current-source-inverter to make improvement of efficiency and to reduce the frequency of inverter switching for photovoltaic generation system using PWM current-source-inverter. This system is connected solar cell energy directly without using a storage cell. The proposed circuit can maintain maximum voltage of photovoltaic generation of take advantage of six Buck-Boost converter and a full-bridge inverter determines the polarity of AC output. That is controlled by using digital signal processor TMS320F2812 for operation about a 6 pulse shift operation control of current-source-inverter, and it is verified through the experimental results.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.144-145
• /
• 2007

Phase change random access memory is one of the most promising candidates for next generation non-volatile memories. However, the high reset current is one major obstacle to develop a high density PRAM. One way of the reset current reduction is to develop the new phase change material. In this paper, to reduce the reset current for phase transition, we have investigated the effect of phase change material parameters using finite element analysis.