• Proceedings of the IEEK Conference
• /
• 2002.06b
• /
• pp.205-208
• /
• 2002

An existing ATM switch fabric uses VPI(Virtual Path Identifier) and VCI(Virtual Channel Identifier) information to route ATM cell. But AAL type 2 switch which efficiently processes delay-sensitive, low bit-rate data such as a voice routes the ATM cell by using CID(Channel Identification) field in addition to VPI and VCI. In this paper, we research the AAL type 2 switch that performs the process of CPS packet. The Receive unit extracts the CPS packet from the inputted ATM cell. The designed receive unit consists of input FIFO, r)( status table, CAM(Content Addressable Memory), new CID table and partial packet memory. Also the designed receive unit supports the PCI interface with host processor. The receive unit is implemented in Xilinx FPGA and operates at 72MHz.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.6 no.2
• /
• pp.74-78
• /
• 2006

This paper presents a high-speed pulse-based flip-flop with pseudo MUX-type scan compatible with the conventional master-slave flip-flop with MUX-type scan. The proposed flip-flop was implemented as the standard cell library using Samsung 130nm HS technology. The data-to-output delay and power-delay-product of the proposed flip-flop are reduced by up to 59% and 49%, respectively. By using this flop-flop, ARM11 softcore has achieved the maximum 1GHz operating speed.

• Tuberculosis and Respiratory Diseases
• /
• v.43 no.2
• /
• pp.123-127
• /
• 1996

Secretion of surfactant phospholipid can be stimulated by a variety of agonists acting via at least three different signal transduction mechanisms. These include the adenylate cyclase system with activation of cAMP-dependent protein kinase; activation of protein kinase C either directly or subsequent to activation of phosphoinositide-specific phospholipase C and generation of diacylglycerols and inositol trisphosphate; and a third mechanism that involves incresed $Ca^{2+}$ levels and a calmodulin-dependent step. ATP stimulates secretion via all three mechanisms. The protein kinase C pathway is also coupled to phopholipase D which, acting on relatively abundant cellular phospholipids, generates diacylglycerols that further activate protein kinase C. Sustained protein kinase C activation can maintain phosphatidylcholine secretion for a prolonged period of time. It is likely that interactions between the different signaling pathways have an important role in the overall physiological regulation of surfactant secretion.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.53-54
• /
• 2007

Charged particle type display using particles which have opposite charge and color is based on effect of reversible optical property due to electric field. we designed mask pattern for fabrication of the charged particle type display based on glass substrate and investigated cell gap dependent of driving voltage and selectively driving method. the panel driven by our selectively driving method, we could obtain image which had vary little crosstalk caused by electrical interference and conform the last image maintained by memory effect without additional voltage.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.23 no.1
• /
• pp.39-63
• /
• 2019

In this paper, we study the effect of Cytotoxic T Lymphocyte (CTL) and antibody immune responses on the virus dynamics with both virus-to-cell and cell-to-cell transmissions. The infection rate is given by Holling type-II. We first show that the model is biologically acceptable by showing that the solutions of the model are nonnegative and bounded. We find the equilibria of the model and investigate their global stability analysis. We derive five threshold parameters which fully determine the existence and stability of the five equilibria of the model. The global stability of all equilibria of the model is proven using Lyapunov method and applying LaSalle's invariance principle. To support our theoretical results we have performed some numerical simulations for the model. The results show the CTL and antibody immune response can control the disease progression.

• Journal of mucopolysaccharidosis and rare diseases
• /
• v.5 no.1
• /
• pp.12-16
• /
• 2021

Mucopolysaccharidosis type II (MPS II, Hunter syndrome) is an X-linked lysosomal storage disorder caused by deficiency of the enzyme iduronate-2-sulfatase, leading to the accumulation of glycosaminoglycans (GAGs), which affects multiple organs and systems. Current treatments for MPS II include enzyme replacement therapy (ERT) and hematopoietic cell transplantation (HCT) to reduce the accumulation of GAGs. HCT has the potential advantage that donor-derived enzyme-competent cells can provide a continuous secreting source of the enzyme. However, HCT as a treatment for MPS II remains controversial because its effectiveness is unclear, particularly in terms of neurological symptoms. To date, several clinical experiences with HCT in MPS II have been reported. In this paper, we review post-HCT outcomes in the previously published literature and discuss the effects of HCT on each of the clinical signs and symptoms of MPS II.

• Journal of Energy Engineering
• /
• v.23 no.4
• /
• pp.88-94
• /
• 2014

In this paper, Thermal Shock tests were performed varying the composition of the solder and ribbon thickness (A-type:0.2mm/60Sn40Pb, B-type:0.25mm/60Sn40Pb, C-type:0.2 /62Sn36Ag2Pb, D-type:0.25mm/62Sn36Ag2Pb) for evaluating the long-term reliability about Ribbon junction of Silicon solar cells. Thermal Shock test condition was performed during the 600cycles having $-40^{\circ}C{\sim}85^{\circ}C$ temperature range each 15 minutes; One cycle time was 30min. As a result, the initial efficiency of the A-type, B-type, and C, D-type were showed 15.0%, 15.4% and 15.8% respectively. After thermal shock test, the efficiency decreasing-rate of each type were as follow that A-type was 13.8%, B-Type was 15.4%. C-Type and D-Type was 15.3% and 16.2%, respectively. Also, degradation of surface changes and I-V characteristic curves were showed that the series resistance of the A, C-type was increased. Also, current lowering starting point of C-type shown 0.05volt[v] earlier than that of A-type. And B, D-type shown characteristics of composite lowering efficiency such as increase of series resistance, decrease of parallel resistance and cell damage. Therefore Initial solderability and efficiency of specimens using the solder with SnAgPb were superior. But, It has inferior the long-term reliability. The test was confirmed that as the ribbon thickness increases, long-term reliability of solar cell will decrease.

• Toxicological Research
• /
• v.14 no.2
• /
• pp.123-127
• /
• 1998

BRCA1 is a tumor suppresser gene in familial cases of breast cancer. It has been controversial whether the subcellular localization of BRCA1 is located in nuclei or cytoplasm in normal human breast cells. We found that a p220 protein was expressed in Type II Normal human breast epithelial cells (NHBEC) but not in Type I NHBEC in Western blot analysis using the 17F8 (3A2) antibody. Immunostaining using the same antibody revealed positive staining in nuclei, cytoplasm and perinuclei of Type II cells and negative staining in Type I NHBEC. The p220 protein, however, was expressed in SV40 immortalized Type I NHBEC and tumorigenic cells derived from them after x-ray and neu oncogene treatment. The subcelluar localization was mostly cytoplasmic and punctate in the nuclei. The breast carcinoma cell lines, MCF-7 and T47D, also expressed the p220 protein. Using RT-PCR, we observed the expression of BRCA1 mRNA in both Type I and Type II NHBEC. This result indicated that there might be mechanisms involved in post-translational or translational regulation of BRCA1 gene. It is speculated that the absence of BRCA1 protein expression in Type I NHBEC might playa role in their susceptibility to neoplastic transformation.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.47 no.1
• /
• pp.29-35
• /
• 2002

This study was carried out to investigate the characteristics of shattering habit and germination of offtype rice plants collected in Korea which were classified into seven groups based on grain characteristics. In the long-grain red rice group, the short-grain red rice group, the long-grain normal rice group, and the long-grain waxy rice group, the tensile strength of grain and primary rachis branch was relatively low and the fiber cell of the primary rachis branch was short. Characteristics of shattering-related traits and germination in relation to grain and esterase isozyme zymogram type of off-type rice plants. In most lines of the extremely late and sterile rice group, the tensile strength of grain was low, while that of primary rachis branch was high, and the fiber cell was long. However, in the type 1 esterase isozyme zymogram(EIZ) lines among the long-grain normal rice group and the type 6 and 5+6 EIZ plants among the extremely late and sterile rice group, the tensile strength of grain was relatively higher. The long-grain waxy rice group and the type 3 EIZ lines among the long-grain red rice group, showed higher germinability than did cultivars which are known to germinate well even in low-temperature. The other off-type rice group, except for the short-grain waxy rice group and type 1 and 7 EIZ lines among the long-grain normal rice group, had higher germination speed than that of the cultivars.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.15 no.6
• /
• pp.260-262
• /
• 2005

Thickness optimization of heavily doped p-type seeding layer was studied to improve performance of thin film silicon solar cell. We used liquid phase epitaxy (LPE) to grow active layer of $25{\mu}m$ thickness on $p^+$ seeding layer. The cells with $p^+$ seeding layer of $10{\mu}m\;to\;50{\mu}m$ thickness were fabricated. The highest efficiency of a cell is 12.95%, with $V_{oc}=633mV,\;J_{sc}=26.5mA/cm^2$, FF = 77.15%. The $p^+$ seeding layer of the cell is $20{\mu}m$ thick. As thicker seeding layer than $20{\mu}m$, the performance of the cell was degraded. The results demonstrate that the part of the recombination current is due to the heavily doped seeding layer. Thickness of heavily doped p-type seeding layer was optimized to $20{\mu}m$. The performance of solar cell is expected to improve with the incorporation of light trapping as texturing and AR coating.