• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.232-232
• /
• 2010

Recently light emitting diodes (LEDs) have been expected as the new generation light sources because of their advantages such as small size, long lifetime and energy-saving. GaN, as a wide band gap material, is widely used as a material of LEDs and GaN nanorods are the one of the most widely investigated nanostructure which has advantages for the light extraction of LEDs and increasing the active area by making the cylindrical core-shell structure. Lately GaN nanorods are fabricated by various techniques, such as selective area growth, vapor-liquid-solid (VLS) technique. But these techniques have some disadvantages. Selective area growth technique is too complicated and expensive to grow the rods. And in the case of VLS technique, GaN nanorods are not vertically aligned well and the metal catalyst may act as the impurity. So we just tried to grow the GaN nanorods on Si substrate without catalyst to get the vertically well aligned nanorods without impurity. First we deposited the AlN buffer layer on Si substrate which shows more vertical growth mode than sapphire substrate. After the buffer growth, we flew trimethylgallium (TMGa) as the III group source and ammonia as the V group source. And during the GaN growth, we kept the ammonia flow stable and periodically changed the flow rate of TMGa to change the growth mode of the nanorods. Finally, as the optimization, we changed the various growth conditions such as the growth temperature, the working pressure, V/III ratio and the doping level. And we are still in the process to reduce the diameter of the nanorods and to extend the length of the nanorods simultaneously. In this study, we focused on the shape changing of GaN nanorods with different growth conditions. So we confirmed the shape of the nanorods by scanning electron microscope (SEM) and carried out the Photoluminescence (PL) measurement and x-ray diffraction (XRD) to examine the crystal quality difference between samples. Detailed results will be discussed.

• Journal of the Korean Electrochemical Society
• /
• v.24 no.4
• /
• pp.113-119
• /
• 2021

In this study, impurity free V^3.5+ electrolytes were prepared using formic acid as a reducing agent and PtD/C as a catalyst and it was applied to VRFB. The well-oriented 3D dendrite structure of the PtD/C catalyst showed high catalytic activity in formic acid oxidation reaction and vanadium reduction reaction. As a result, the conversion ratio of electrolyte using the PtD/C was 2.73 mol g^-1 h^-1, which was higher than that of 1.67 mol g^-1 h^-1 of Pt/C prepared by the polyol method. In addition, in the VRFB charging and discharging experiment, the V^3.5+ electrolyte produced by the catalytic reaction showed the same performance as the standard V^3.5+ electrolyte prepared by the electrolytic method, thus proving that it can be used as an electrolyte for VRFB.

• Journal of the Korean Electrochemical Society
• /
• v.26 no.4
• /
• pp.64-70
• /
• 2023

Global warming is getting worse since a dramatic increase in greenhouse gas emissions recently. As a result, the necessity and implementation of carbon neutrality is required more urgently. To do this, among various new and renewable energies, attention in hydrogen arises. Hydrogen as a carbon-free power source is an abundant resource on Earth and is eco-friendly. Eventually, perfectly eco-friendly hydrogen can be obtained through electrolysis of water. However, the catalyst used in the oxygen evolution reaction is rare and expensive, and has a durability issue. Consequently, the development of a non-precious metal catalyst is necessary. In this review paper, we summarize and introduce Co- and Mo- based catalysts among recently announced oxygen evolution catalysts. This will help understand the design of catalyst to increase the activity and durability of non-precious metal catalysts.

• Korean Chemical Engineering Research
• /
• v.61 no.4
• /
• pp.487-495
• /
• 2023

Ammonia is either a crucial resource of fertilizer production for solving the food problem of mankind or an important energy source as both an eco-friendly hydrogen carrier and a carbon-free fuel. Therefore, nowadays ammonia synthesis and decomposition become promising. Then, a catalyst is required to effectively perform the ammonia synthesis and decomposition. In order to design high-performing as well as cheap novel catalysts for ammonia synthesis and decomposition, it is necessary to test huge amount of catalyst candidates, but it is inevitably time-consuming and expensive to search and analyze using only traditional approaches. Recently, new methods using machine learning which is one of the core technologies of the 4th industrial revolution that can quickly and accurately search high-performance catalysts has been emerging. In this paper, we investigate reaction mechanisms of ammonia synthesis and decomposition, and we described recent research and prospects of machine learning-driven methods that can efficiently find high-performing and economical catalysts for ammonia synthesis and decomposition.

• Clean Technology
• /
• v.21 no.3
• /
• pp.184-190
• /
• 2015

Most of LNT catalysts use noble metals such as Pt for low temperature NO_x oxidation but there is an economic weakness. For the purpose of overcoming this, this study is to develop DeNO_x catalyst for LNT excluding PGM (platinum group metal) such as Pt, Pd, Rh, etc. To do so, Al/Co/Ni catalyst selected as a preliminary test is used to study fundamental property and NO_x’s conversion according to calcined temperature. Ultimately, that is, Al/Co/Ni mixed metal oxide which does not use PGM is selected and physicochemical characterization is performed by way of XRD, EDS, SEM, BET and ramp test and NO_x conversion is also analyzed. This study shows that all samples consist of mixed oxides of spinel structure of Co₂AlO₄ and NiAl₂O₄ and have enough pore volume and size for redox. But as a result of NH₃-TPD test, it is desired that calcined temperature needs to be maintained at 700 ℃ or lower. Also only samples which are processed under 500 ℃ satisfied NO and NO_x conversion simultaneously through ramp test. Based on this study’s results, optimum calcined temperature for Al/Co/Ni=1.0/2.5/0.3 mixed metal oxide catalyst is 500 ℃.

• Korean Chemical Engineering Research
• /
• v.43 no.5
• /
• pp.621-626
• /
• 2005

The esterification reaction of free fatty acid with methanol was investigated in the presence of catalyst, Amberlyst-15, producing fatty acid methyl ester, namely, biodiesel. In this paper, the effects of the reaction parameters such as reaction temperature, mole ratio of alcohol to oleic acid and mass of catalyst on the catalytic activity have been examined. The results showed that the reaction rate increased about twice as the temperature increased every $20^{\circ}C$ in the reaction temperature range from 333 K to 373 K. The equilibrium conversion rate of oleic acid increased with the feed mole ratio of alcohol to acid ranging from 6:1 to 44:1. When the feed mole ratio was higher than 44:1, all the results were similar to that of 44:1. As for the influence of the mass of catalyst, the initial reaction rate increased from 1.2 to 1.3 times as the mass of catalyst doubles in the range of the catalyst weight from 5 to 20 wt%. The experiment data obtained were well described by the second reaction rate using a pseudo-homogeneous model.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.264-265
• /
• 2010

최근, nanorod나 nanowire와 같은 1차원의 나노구조가 나노디바이스로 각광을 받고 있다. [1] 특히 InN는 3족 질화물 반도체 중 가장 작은 밴드갭 에너지와 뛰어난 수송 특성을 가지고 있어 나노디바이스로의 응용에 적합한 물질이다. [2] 그러나 InN는 큰 평형증기압을 가지므로 쉽게 인듐과 질소로 분해되는 특성이 있어 나노구조로의 성장이 쉽지 않음이 알려져 있다. [3] 최근 연구결과에 따르면, InN 나노구조는 금속 catalyst를 사용한 방법이나, 기판 위 패턴을 이용하여 성장하는 방법, 염소를 사용한 방법이 널리 쓰이고 있다. [4,5,6] 그러나 이 방법들은 의도치 않은 불순물의 원인이 되거나 다른 추가적인 과정을 필요로 한다는 문제점도 일부 가지고 있다. 본 연구에서는 catalyst-free 유기 금속 화학 증착법 (MOCVD)를 이용하여 $Al_2O_3$ (0001)면 위에 InN nanostructure를 성장하였다. InN nanostructure 성장 시 트리메틸인듐(TMIn)과 암모니아($NH_3$) 를 전구체로 사용하였으며, 캐리어 가스로는 질소를 사용하였다. 또한 모든 샘플의 성장시간은 60분으로 고정하였으나, 성장 시 온도의 의존성을 보기 위해 $680-710^{\circ}C$ 의 온도범위에서 성장을 진행하였다. 그 결과 InN는 본 실험에서 적용된 성장온도범위 내에서 온도가 증가함에 따라 초기에는 columnar구조로 성장된 박막의 형태에서 wall이 배열된 형태로 변화하며 결국 $710^{\circ}C$ 의 온도에서 nanorod로 성장하게 된다. 성장된 InN의 나노구조는 X-선 회절 측정법, 주사 전자 현미경 그리고 투과 전자 현미경을 이용하여 각각의 구조적 특성을 분석하였다. X-선 회절 측정법과 주사 전자 현미경을 통한 분석결과에서는 이들 nanorods가 대부분 c 방향으로 수직하게 정렬되어 있음을 확인 할 수 있었다. 또한, $690^{\circ}C$ 에서 60분간 성장된 InN의 wall 구조의 두께는 200 nm, 길이는 $2-2.5\;{\mu}m$로 관찰되었으며, $710^{\circ}C$에서 60분간 성장된 InN nanorod의 지름은 150 nm, 길이는 $3\;{\mu}m$ 정도로 관찰되었다. 이를 통하여 볼 때 성장 온도가 InN의 나노구조 형성 시 표면의 모폴로지변화에 중요한 변수로 작용함을 알 수 있다. 본 발표에서는 이러한 표면 형상 및 구조 변화가 성장온도에 따른 관계성을 가짐을 InN의 분해와 성장의 경쟁적인 관계에 의해 논의할 것이다.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.33 no.2
• /
• pp.71-79
• /
• 2017

Purpose: Ni-Cr alloy does not contain Beryllium, causing the metal compound to form oxides in the furnace but by using Titanium as a chemical catalyst the forming of the oxides can be controlled, and by controlling the impurities formed on the metal surface, the possibility of the Ni-Cr alloy bond strength being increased can be analysed. Materials and Methods: Titanium was used as a chemical catalyst in the porcelain for the oxidation of beryllium-free metal (Ni-Cr) alloy. The T1 group, which does not use Titanium power as a chemical catalyst is a reference model for comparison. The T2 group and T3 group used 10 g and 20 g of Titanium power, respectively. They are fabricated to observe the shear bond strength and surface properties. There was no significance when One-way ANOVA analysis/Tukey Honestly Significant Difference Test was conducted for statistical analysis among groups (P > 0.05). Results: Results of measuring the three-point flexural bond strength of the Ni-Cr alloy and thickness of the oxide film. Experiment T3 using 20 g Titanium chemical catalyst: $39.22{\pm}3.41MPa$ and $6.66{\mu}m$, having the highest bond strength and thinness of oxide film. Experiment T2 using 10 g Titanium chemical catalyst: $34.65{\pm}1.39MPa$ and $13.22{\mu}m$. Experiment T1 using no Titanium chemical catalyst: $32.37{\pm}1.91MPa$ and $22.22{\mu}m$. Conclusion: The T2 and T3 experiments using Titanium chemical catalyst showed higher bond strength for the Ni-Cr alloy and lower thickness of oxide film than experiment T1, and the titanium catalyst being able to increase bond strength was observed.

• Korean Journal of Materials Research
• /
• v.26 no.5
• /
• pp.250-257
• /
• 2016

Octahedral $Co_3O_4$/carbon nanofiber (CNF) composites are fabricated using electrospinning and hydrothermal methods. Their morphological characteristics, chemical bonding states, and electrochemical properties are used to demonstrate the improved photovoltaic properties of the samples. Octahedral $Co_3O_4$ grown on CNFs is based on metallic Co nanoparticles acting as seeds in the CNFs, which seeds are directly related to the high performance of DSSCs. The octahedral $Co_3O_4$/CNFs composites exhibit high photocurrent density ($12.73mA/m^2$), superb fill factor (62.1 %), and excellent power conversion efficiency (5.61 %) compared to those characteristics of commercial $Co_3O_4$, conventional CNFs, and metallic Co-seed/CNFs. These results can be described as stemmnig from the synergistic effect of the porous and graphitized matrix formed by catalytic graphitization using the metal cobalt catalyst on CNFs, which leads to an increase in the catalytic activity for the reduction of triiodide ions. Therefore, octahedral $Co_3O_4$/CNFs composites can be used as a counter electrode for Pt-free dye-sensitized solar cells.

• Korean Chemical Engineering Research
• /
• v.45 no.3
• /
• pp.286-290
• /
• 2007

The esterification efficiency of several ionic liquids has been investigated to determine the feasibility for the conversion of free fatty acids to alkylester. Five ionic liquid catalysts having strong acidity, BPC[$AlCl_3$], BMIM[$Bf_4$], BMIM[$Pf_6$], EMIM[$Ntf_2$], BMIM[Otf], have been employed in this work. BPC[$AlCl_3$] has the highest esterification efficiency among the ionic liquid catalysts. Over 90% conversion efficiency has been achieved in the esterification of the simulated used cooking oil by BPC[$AlCl_3$] with two hours reaction time. Since BPC[$AlCl_3$] has several advantages such as high esterification activity, ease of separation from reaction mixture and reusability after treatment procedure, it will be a promising catalyst for the conversion of free fatty acids to esters in waste fats.