• Membrane Journal
• /
• v.31 no.6
• /
• pp.443-455
• /
• 2021

In this study, polyphenylene sulfide (PPS) was used as a support and a separator was manufactured using polysulfone and inorganic additives to manufacture a separator with low membrane resistance for application of an alkali water electrolysis system, and then the effect on the thickness and porosity of the support was analyzed. The PPS felt used as a support was compressed with variables of temperature (100℃, 150℃, 200℃) and pressure (1 ton, 2 tons, 3 tons, 5 tons) to adjust the thickness. A porous separator could be manufactured by preparing a slurry with polysulfone using BaTiO₃ and ZrO₂ which have high hydrophilicity and excellent alkali resistance as inorganic particles and casting the slurry on a compressed PPS felt. Changes in morphology of the separator according to compression conditions were confirmed through an electron scanning microscope (SEM). After that, the porosity was calculated, and the thickness and porosity tended to decrease as the compression conditions increased. Various characteristics were evaluated to confirm whether it could be used as a separator for water electrolysis. As a result of measuring the mechanical strength, it was confirmed that the tensile strength gradually increased as the compression conditions (temperature and pressure) increased. Finally, it was confirmed that the porous separator manufactured through the alkali resistance test has excellent alkali resistance, and through the IV test, it was confirmed that the membranes compressed at 100℃ and 150℃ had a lower voltage and improved performance than the existing uncompressed membrane.

• Journal of Korea Foundry Society
• /
• v.42 no.2
• /
• pp.83-93
• /
• 2022

Throughout this research course, we have analyzed the financial situation of more than 2,700 companies using credit evaluation disclosures from 2017 to 2019. The population was gathered based on the certification of Ppuri companies and Ppuri Expertise companies through the Korea National Ppuri Industry Center, accompanied by the NICE credit evaluation index. For the first time in Korea, we wanted to look at growth, profitability, and stability through financial analysis of the Ppuri industry. Through an indepth analysis, we identified operating income (rate), net income (rate), asset size, and debt ratio, along with three years of Ppuri company workers and total sales fluctuations, and looked at the financial structure per capita. In addition, financial status per person was compared by dividing Ppuri companies into six groups by employee size. Groups were 10 or fewer people, 11 to 20 people, 21 to 50 people, 51 to 200 people, 201-300 people, and 300 or more people; single individual companies were excluded for research convenience. Overall, the financial situation of Ppuri companies was judged to be in a very bad downturn, and financial indicators deteriorated over the course of the three years of investigation. In particular, the smaller the number of employees, the greater the financial fluctuations were and the worse the situations were. Among Ppuri companies, the casting industry, which is the technical starting point for the value chain of the industry, was found to also be in a very bad state, with continued workforce declines, total assets and sales reductions at severe levels, and operating income (rate) and net income (rate) also very poor. This is why we need a suitable and feasible policy direction, something that is difficult but must be allowed to develop.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.29 no.1
• /
• pp.1-7
• /
• 2023

Chlorine dioxide (ClO₂) is widely used for post-harvest sterilization treatment. However, there are limitations in the retail application of ClO₂ due to difficulties in handling, expensive facilities, and safety concerns. Therefore, it is necessary to develop a ClO₂ technology that can be easily applied and continuously released for a long period. In this study, a series of ClO₂ self-releasing sachets were developed. First, poly(ether-block-amide) (PEBAX) and polyethylene-glycol (PEG) composite films containing different ratios of citric acid (CA) were prepared using the solution casting method. The as-prepared PEBAX/PEG-CA composite films were evaluated using FT-IR, DSC, and TGA to confirm chemical structure and thermal properties. Subsequently, PEBAX/PEG-CA composite films were designed in the form of a sachet and NaClO₂ powder was transferred into the sachet to achieve a ClO₂ self-releasing system. The ClO₂-releasing behavior of the sachet was investigated by measuring the release amount of the gas using UV-vis. The release amount of ClO₂ increased with increasing CA contents owing to the existence of higher protons (trigger) in the polymer matrix. Further, ClO₂ gas was released for a longer time. Therefore, the as-prepared smart sachet can be tuned according to applications and packaging sizes to serve an optimal sterilization effect.

• Journal of Soil and Groundwater Environment
• /
• v.11 no.2
• /
• pp.22-37
• /
• 2006

The applicability of biobarrier or in situ microbial filter technology for the remediation of groundwater contaminated with chlorinated solvent was investigated through batch microcosm study. The efficiency and rates of reductive dechlorination of tetrachloroethylene (PCE) are known to be highly dependent on hydrogen concentration. In this study, the effect of electron donors on the reductive dechlorination of PCE was investigated using vermicompost (or worm casting) and peat as a biobarrier medium. The effect of organic acids (lactate, butyrate and benzoate), yeast extract and vitamin $B_{12}$ on the reductive dechlorination was investigated. In the absence of biobarrier medium (adsorbent), addition of electron donors stimulated the dechlorination rate of PCE compared to the control experiment (i.e., no electron donor added). Among the treatments, addition of lactate or lactate/benzoate as hydrogen donor exhibited the highest dechlorination rate ($k_1=0.0260{\sim}0.0266\;day^{-1}$). In case of using vermicompost as a biobarrier medium, amendment of lactate/benzoate exhibited the highest dechlorination rate following with a pseudo-first-order degradation rate constant of $k_1=0.0849\;day^{-1}$. In contrast, when Pahokee peat was used as a biobarrier medium, either butyrate or lactate addition exhibited the highest dechlorination rate with $k_1$ values of 0.1092 and $0.1067\;day^{-1}$, respectively. The results of this study showed the potential applicability of in situ biobarrier technology using vermicompost or peat as a barrier material for the remediation of groundwater contaminated with chlorinated solvent.

• Journal of Korea Technology Innovation Society
• /
• v.19 no.1
• /
• pp.191-229
• /
• 2016

As Korean national R&D projects have steadily grown in size, the needs of enhancing the efficiency and effectiveness of the national R&D budge spending has been also discussed. Therefore, many efforts have been made to establish performance assessment system to improve the efficiency and effectiveness of the national R&D project. One example of such efforts is the stipulation of connecting the results of performance evaluation ranking of the national R&D projects with the budge allocation of for the coming fiscal year. Unlike the stipulated article in the law/regulation that 'more budge shall be allocated to a project rated over excellent grade and vice versa', however, precedent studies have been casting mixed opinions over to the effectiveness of the connection between assessment results and budge allocation. In this respect, the present study attempted to empirically examine if the laws and institutions related to the results of performance evaluation ranking of the national R&D projects with the budge allocation work properly, using panel regression analysis and quantitative data. In addition, this study investigated into the deterrent factors to the connectivity between the performance results of the national R&D projects and budge allocation and sought for a way to improve the system of performance assessment and enhance the reliability of the results by minimizing the hindrance factors.

• Polymer(Korea)
• /
• v.27 no.3
• /
• pp.226-234
• /
• 2003

Ipriflavone (IP), a non-hormonal isoflavone derivative, has been shown to interfere with bone remodeling by inhibiting bone resorption and stimulating bone formation. IP consistently increased the amount of Ca incorporated into the cell layer by mesenchymal stem cells (MSCs). In this study, we developed the novel IP loaded poly(L-lactide-co-glycolide) (PLGA) scaffolds for the possibility of the application of the tissue engineered bone. IP/PLGA scaffo1ds were prepared by solvent casting/salt leaching method and were characterized by porosimeter, scanning electron microscopy, determination of residual salt amount, differential scanning calorimetry, and X-ray diffractometer, respectively. IP/PLGA scaffolds were implanted into the back of athymic nude mouse to observe the effect of IP on the osteoinduction compared with control PLGA scaffo1ds. Thin sections were cut from paraffin embedded tissues and histological sections were stained H&E, von Kossa, and immunohistochemical staining for Type I collagen and osteocalcin. It can be observed that the porosity was above 91.7% and the pore size was above 101 $\mu\textrm{m}$. Control scaffo1d and IP/PLGA scaffo1ds of 50% IP were implanted on the back of athymic nude mouse to observe the effect of IP on the induction of cells proliferation for 9 weeks. The evidence of calcification, osteoblast, and osteoid from the undifferentiated stem cells in the subcutaneous sites and other soft connective tissue sites having a preponderance of stem cells has been observed. From these results, it seems that IP plays an important role for bone induction in IP/PLCA scaffolds.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.5 no.1
• /
• pp.21-28
• /
• 2017

The steel-plate concrete(SC) is used in a form of module assembly construction in the outer wall of nuclear-power plant and LNG containment. Since the steel-plate concrete modules are generally manufactured from the plant, the weight of SC has significantly effect on the total construction cost in the aspect of shipment. Therefore, the use of lightweight aggregates concrete(LWAC), which fill the inside of SC module can be a solution. However, the amount of used lightweight aggregates(LWA) is limited in the use of current concrete mixing process due to the concrete quality problems and it also determines the allowable minimum density of LWAC. In this research, the preplaced casting method is applied because of increasing the volume fraction of LWA significantly, which results from the producing process of pre-packing the LWA in the formwork and filling the interstitial voids between LWA using cement paste grout. The density and compressive strength of selected preplaced LWAC were $1,600kg/m^3$ and 30MPa and it was applied for the mock-up specimens of SC panel. It was used for the 3-point bending test for evaluating its structural performance. The results show that the preplaced LWAC can reduce the density of concrete with the adequate mechanical and structural performance.

• Journal of Animal Science and Technology
• /
• v.48 no.6
• /
• pp.943-948
• /
• 2006

This study carried out to investigate the effect of cutting stimulation on time of cutting, yield and length of antler in Sika deer. There was no significance between surgical stimulation and length of antler, but length was the longest in one side cutting group and the shortest in both side cutting group. Development of point was increased as the number of wounds in the second year (P<0.05). Time of casting was 2 weeks earlier in one side cutting group (P<0.05) than in both sides cutting group. Yields of velvet antler were 148±23g when pedicle was not cut, and 126±61g, 179±63g, 170g, and 48±25g when pedicle was cut by 0.3cm, 0.4cm, 0.5cm and 0.6cm thickness, respectively. In case of 0.6cm, yield was significantly smaller than others (P<0.05). The most desirable thickness of pedicle cut was 0.4～0.5mm. Yield of antler was increased as the size of wound in the first year, and 588, 790 and 657g in control, one-cut and both-cut, respectively. Yields of antler in one-cut is significantly high (P<0.05).

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.38 no.3
• /
• pp.202-208
• /
• 2002

Test fishing was carried out utilizing a coastal pot-fishing boat from IS March to 7 April 2002 and the results obtained are summarized as follows ; 1. Mean catches(Number of sea eels) according to the soak time of 3 hours, 6 hours and 12 hours were 44.6, 60.0 and 83.3, and CPUE(Number of catch / 10pots·hour) were 2.5, 1.7 and 1.1 respectively 2. Catch difference between over 24 hours and 48 hours was 11.3% and 3.3% between over 48 hours and 72 hours. 3. In the test fishing, by-catches were so low(1.5∼3%) until 12 hours of soaking time passed By-catches were increased according to the soaking time addition on the over 24 hours of soaking time. The bait effect for sea-eel seems to be diminished as soon as the casting started and there was big difference in proportion to bait size and freshness.

• Journal of the Korean Ceramic Society
• /
• v.42 no.3 s.274
• /
• pp.165-170
• /
• 2005

Sol-gel methods offer many advantages over conventional slip-casting, including the ability to produce ceramic membranes. They are purer, more homogeneous, more reactive and contain a wider variety of compositions. We produced ormosil sol using sol-gel process under various molecular weight of polymer species[polyethylene glycol(PEG)] in total system [Tetraethyl ortho silicate(TEOS)-polyethylene glycol(PEG)]. The properties of as-prepared ormosil sol such as viscosity and gelation time are characterized. Also, the ceramic membrane was prepared by dip-coating with synthetic sol and its microstructure was observed by scanning electron microscopy. The permeability and rejection efficiency of membrane for oil/water emulsion were evaluated as cross­flow apparatus. The ormosil sol coated membrane was easily formed by steric effect of polymer and it improved flux efficiency because infiltration into porous support decreased. Its flux efficiency was elevated about $200\;l/m^2h$ compared with colloidal sol coated membrane at point of five minutes from starting test.