• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• autumn
• /
• pp.226-229
• /
• 2003

Construction manager must consider the possibility on the failure of the project in advance and the contingency to provide against the situation, those of which is a dangerous condition not to predict. If they have a quick decision without understanding the contingency, the over-cost in the total cost would be continuously accumulated, and be a barrier at a project going in progress. A various risk could not be coped with at a time to decide either going or sloping the project until the contingency is applied from the first step to progress the project. But a case to apply the contingency to the construction for the investment or the analysis of the project is a little. The process to evaluate it is also absent. The propose of this paper is the followed ; To establish the total cost including the risk first of all, devide into plus or minus factor of the cost, and then the process to calculate the contingency must be suggested by the regression analysis.

• Journal of Advanced Navigation Technology
• /
• v.18 no.5
• /
• pp.508-512
• /
• 2014

This paper suggests the control system and algorithm for auto and manual control of the streetlight using RF system. There are two control system in this auto control algorithm. One is group control, the other individual control. In case of group control, if a car is detected by the object detecting sensor of the system installed on the streetlight, it will turn on the light per group by transmitting the RF signal. The streetlight turns on separately when it detects people or a car parked on the shoulder in accordance with the individual control. Also, there is manual control algorithm that manager can check surrounding environment and condition of the streetlight by RF signal and various sensors. So, not only the proposed system reduce meaningless energy consumption, but also it offers convenience regarding maintenance and control of the streetlight.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.29 no.3
• /
• pp.41-61
• /
• 2004

The purpose of this paper is to construct $\ulcorner$CIDEAR(Cross Impact-DEA-AR)$\lrcorner$ model which evaluates proposed R&D projects considering cross impact among them and selects proper projects to utilize resources efficiently as well as to maximize efficacy of investments. For this purpose, $\ulcorner$CIDEAR$\lrcorner$ model is designed as the following six steps. $\ulcorner$Decision Theory Evaluation Model$\lrcorner$ is for setting and selecting the evaluation items according to the structured procedure of evaluation system. The priority of items is decided at $\ulcorner$AR Decision Model$\lrcorner$$\ulcorner$Cross Impact Estimation Model$\lrcorner$ is for computing the final probability of success and the result is used to revise the evaluation results of $\ulcorner$Decision Theory Evaluation Model$\lrcorner$. $\ulcorner$Resource Performance Analysis Model$\lrcorner$ classifies the proposed R&D projects on the basis of required resources and expected performance. Consequently, the possibility of bias of project selection can be prevented. $\ulcorner$Priority Oder Decision Model$\lrcorner$ is for computing the efficacy of proposed projects. Finally, $\ulcorner$Efficacy-Efficiency Cause Analysis Model$\lrcorner$ analyzes the structure of efficacy and efficiency of the projects. The major findings and significances of this study are summarized as follows: (1) $\ulcorner$CIDEAR$\lrcorner$ model can deal with the affairs of R&D projects having the characteristics of mutual independence as well as mutual dependence in the point of efficacy and efficiency. Hence, it is possible to evaluate and select R&D projects more accurately. (2) It can be possible to raise the possibility of projects success. R&D manager can use the information for project management because the efficacy-efficiency structure of selected projects can be analyzed. (3) We proved the usefulness of the constructed $\ulcorner$CIDEAR$\lrcorner$ model using an case about twenty-one R&D projects of a leading company of electronic industry in Korea.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.15 no.4
• /
• pp.17-25
• /
• 2020

Venture debt is a prominent funding tool to promote scale-up of ventures. In the growth stage, venture firms that need large-scale funding can accelerate their growth by leveraging venture debt without diluting their shares, while venture capitals can quickly recollect their investments by accelerating the growth of the ventures they invest. By supplying venture debt, banks can diversify their asset primarily concentrated on loans, and improve the return on assets. As in the case of Silicon Valley Bank, a leading venture lender, closer cooperation between the two agents is essential to supply venture debt. One is the venture capital, an equity capital supplier, and the other is the bank, a debt capital supplier. To this end, we propose "credit risk sharing venture loans" and "venture loan pooling". The former encourages banks' participation in the venture debt market where the manager of Korean Fund of Funds, KVIC and policy guarantee schemes such as KODIT and KIBO screen or partially absorbe the risks inherent in venture loans. The latter reduces the burden of banking on individual venture loans through securitization.

• The Journal of the Korea Contents Association
• /
• v.7 no.10
• /
• pp.321-329
• /
• 2007

The form of travel has been changing to dynamic, experience and family. Festivals are popular, specially the historic culture festivals, whose themes are a history event, a time and the people, are preferred to families because they give visitors opportunities of education and experience. Evaluation of festivals is important that it diagnoses the problems and enhancement One of the evaluation methods, Importance-Performance Analysis is useful which it is easy to find priority with visual matrix without complex statistical technique and a technical terminology. This research used IPA to evaluate The Yeoncheon Jeongok Paleolithic Festival which is one of the popular historic culture festivals. From the result 'unique food', 'rest facility', 'other convenience facility', 'hygiene', 'crowding' were included in selected to 'concentrate' territory of the IPA matrix. Therefor the festival manager should put his efforts to develop unique food, build more rest and other convenience facilities, enhance hygiene, and lowered crowding.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.631-637
• /
• 2005

This paper presents a stiffness analysis method for a low-DOF parallel manipulator, which takes into account of elastic deformations of joints and links. A low-DOF parallel manipulator is defined as a spatial parallel manipulator which has less than six degrees of freedom. Differently from the case of a 6-DOF parallel manipulator, the serial chains in a low-DOF parallel manipulator are subject to constraint forces as well as actuation forces. The reaction forces due to actuations and constraints in each limb can be determined by making use of the theory of reciprocal screws. It is shown that the stiffness model of an F-DOF parallel manipulator consists of F springs related to the reciprocal screws of actuations and 6-F springs related to the reciprocal screws of constraints, which connect the moving platform to the fixed base in parallel. The $6{times}6$ stiffness matrix is derived, which is the sum of the stiffness matrices of actuations and constraints. The six spring constants can be precisely determined by modeling the compliance of joints and links in a serial chain as follows; the link can be considered as an Euler beam and the stiffness matrix of rotational or prismatic joint can be modeled as a $6{times}6$ diagonal matrix, where one diagonal element about the rotation axis or along the sliding direction is zero. By summing the elastic deformations in joints and links, the compliance matrix of a serial chain is obtained. Finally, applying the reciprocal screws to the compliance matrix of a serial chain, the compliance values of springs can be determined. As an example of explaining the procedure, the stiffness of the Tricept parallel manipulator has been analyzed.

• Journal of The Korean Association of Information Education
• /
• v.5 no.2
• /
• pp.279-287
• /
• 2001

In this paper, we have defined and designed the structure of standardized XML content for supplying efficient e-Learning contents. We have also implemented the prototype of XML contents generator to create the educational contents easily. In addition, we have suggested the contents searching method using Case Base Reasoning and Bayesian belief network to supply XML contents suitable to learners request. The existing e-Learning system based on HTML could not customize and standardize, but XML contents can be reused and made an intelligent learning by supplying an adaptive content according to learners level. For evaluating the efficiency of designed XML content, we make the standard XML content for learning JAVA program in e-Learning system as well as discussing about the integrity and expanding the educational content. Finally, we have shown the architecture and effectiveness of the knowledge-based XML contents retrieval manager.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.1
• /
• pp.151-156
• /
• 2017

In case of massive water leakage, it's crucial for field manager to quickly positioning the problematic valve and related ones. However, it's not easy for the system to find the corresponding valve and even if it's found, it can not respond quickly because it can't know the relevant information immediately. In this paper, we implement the system for identifying sluice valve positions using GPS and AR techniques. The proposed system is composed of hand held android device, remote database server and data acquisition device for DB creation. We utilize the android device's sensors including GPS, gyro, accelerometer, magnetic sensor. The system identifies the valve with matching between the position data from the remote database server, and current GPS locations of device. We use AR techniques to overlay the graphics pattern of valve positions and some additional informations on captured real scene. With this system, it will be fast and accurate for maintenance of sluice valve of municipal water system.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.05a
• /
• pp.157-159
• /
• 2015

Most cargo truck drivers of small and medium-sized firms often process their works using a paper document containing the transport-related information. However, these paper documents that are used to plan route or check the list for cargo loading have the potential to be lost or damaged. Also, it is not easy to manage cargo using certain devices not the paper document in case of small and medium-sized firms because the budget is limited. In this paper, we implement the cargo transportation system for desktop and android-based application in order to solve these problems. A manager for cargo transportation is provided a simple interface to manage the transport-related information through the desktop application. A cargo truck driver is provided functions such as plan route and make a call to manage the transport-related information through the android-based application. This system is implemented to improve the efficiency of cargo transportation.

• KIEAE Journal
• /
• v.13 no.5
• /
• pp.51-57
• /
• 2013

Energy saving starts by knowing how much energy is being consumed. A building factor is easier than any other things in energy saving. Since, especially, it is closely connected with user's space-use-patterns and manager's utility-operation-style. An energy metering system lets building users know about energy consumption pattern in buildings and measure energy in real time. Development and materialization of metering systems need more careful plans, so that they depend on a demand of individual facilities and available infrastructures they used to use. But, so far, there is no guidelines how to install metering systems. This paper suggested how to install meters and researched a method for how to analyze by using metered data. For that, Green Building in KIER is used as a test bed. As the results, nevertheless the smallest number of meters is basically one for the whole building energy measuring, it is too limited in analysis. So we needed to add the sort of fuel and utility types and found that it depends on all cases. For this reasons, a guideline should be created in order to install meters as soon as possible. It would be suggest a way to save more energy in building factor.