• Journal of Electrochemical Science and Technology
• /
• 제14권2호
• /
• pp.184-193
• /
• 2023

This study investigates the effects of a carbon fiber layer formed on the surface of an etched aluminum current collector on the electrochemical properties of the activated carbon electrodes for an electric double layer capacitor. A particle size analyzer, field-emission SEM, and nitrogen adsorption/desorption isotherm analyzer are employed to analyze the structure of the carbon fiber layer. The electric and electrochemical properties of the activated carbon electrodes using a carbon fiber layer are evaluated using an electrode resistance meter and a charge-discharge tester, respectively. To uniformly coat the surface with carbon fiber, we applied a planetary mill process, adjusted the particle size, and prepared the carbon paste by dispersing in a binder. Subsequently, the carbon paste was coated on the surface of the etched aluminum current collector to form the carbon under layer, after which an activated carbon slurry was coated to form the electrodes. Based on the results, the interface resistance of the EDLC cell made of the current collector with the carbon fiber layer was reduced compared to the cell using the pristine current collector. The interfacial resistance decreased from 0.0143 Ω·cm² to a maximum of 0.0077 Ω·cm². And degradation reactions of the activated carbon electrodes are suppressed in the 3.3 V floating test. We infer that it is because the improved electric network of the carbon fiber layer coated on the current collector surface enhanced the electron collection and interfacial diffusion while protecting the surface of the cathode etched aluminum; thereby suppressing the formation of Al-F compounds.

• Journal of Electrochemical Science and Technology
• /
• 제7권2호
• /
• pp.139-145
• /
• 2016

The electrochemical performance of carbon-coated LiMn₂O₄ nanoparticles was reported. The polydopamine layer was introduced as a new organic carbon source. The carbon layer was homogeneously coated onto the surface of the LiMn₂O₄ nanoparticles because the polymerization process from the dopamine solution (in a buffer solution, pH 8.5) easily and uniformly formed a polydopamine layer. The phase integrity of LiMn₂O₄ deteriorated during the carbon-coating process due to oxygen loss, although the main structure was maintained. The carbon-coated sample led to improved rate capability because of the effect of the conductive carbon layer. Moreover, the carbon coating also enhanced the cyclic performance. This indicates that the carbon layer may suppress unwanted side reactions with the electrolytes and compensate for the low electronic conductivity of the pristine LiMn₂O₄.

• Tribology and Lubricants
• /
• 제13권2호
• /
• pp.96-104
• /
• 1997

This paper was focused on the wear characteristics of ion-nitrided metal and with ion-nitride processing, which is basically concerned with the effects of carbon content in workpiece and added carbon content gas atmosphere on the best wear performance. Increased carbon content in workpiece increases compound layer thickness, but decreases diffusion layer thickness. On the other hand, a small optimal amount of carbon content in gas atmosphere increase compound layer thickness as well as diffusion layer thickness and hardness. Wear tests show that the compound layer of ion-nitrided metal reduces wear rate when the applied wear load is small. However, as the load becomes large, the existence of compound layer tends to increase wear rate. Compressive residual stress at the compound layer is the largest at the compound layer, and decreases as the depth from the surface increases. It is found in the analysis that under small applied load, the critical depth where voids and cracks may be created and propagated is located at the compound layer, so that the adhesive wear is created and the existence of compound layer reduces the amount of wear. When the load becomes large, the critical depth is located below the compound layer and delamination, which may explained by surface deformation, crack nucleation and propagation, is created and the existence of compound layer increases wear rate. For the compound layer, at added carbon contents of 0 percent and 0.5 at. percent, the $\varepsilon$ monophase is predominant. But at 0.7 at. percent added carbon, the $\varepsilon$ monophase formation tends to be severely inhibited and r' and $Fe_3C$ polyphase formation becomes dominant. This increased hard $\varepsilon$ phase layer was observed to be more beneficial in reducing friction and wear.

• 한국분말재료학회지
• /
• 제24권3호
• /
• pp.248-253
• /
• 2017

In this study, we investigate the effect of the diffusion barrier and substrate temperature on the length of carbon nanotubes. For synthesizing vertically aligned carbon nanotubes, thermal chemical vapor deposition is used and a substrate with a catalytic layer and a buffer layer is prepared using an e-beam evaporator. The length of the carbon nanotubes synthesized on the catalytic layer/diffusion barrier on the silicon substrate is longer than that without a diffusion barrier because the diffusion barrier prevents generation of silicon carbide from the diffusion of carbon atoms into the silicon substrate. The deposition temperature of the catalyst and alumina are varied from room temperature to $150^{\circ}C$, $200^{\circ}C$, and $250^{\circ}C$. On increasing the substrate temperature on depositing the buffer layer on the silicon substrate, shorter carbon nanotubes are obtained owing to the increased bonding force between the buffer layer and silicon substrate. The reason why different lengths of carbon nanotubes are obtained is that the higher bonding force between the buffer layer and the substrate layer prevents uniformity of catalytic islands for synthesizing carbon nanotubes.

• 한국군사과학기술학회지
• /
• 제11권3호
• /
• pp.169-175
• /
• 2008

A fine carbon fibers dispersion model is implemented to calculate the scattering range and ground level concentration of carbon fibers emitted at certain altitudes of atmospheric boundary layer. This carbon fibers dispersion model was composed by coupling a commonly used atmospheric dispersion model and an atmospheric boundary layer model. The atmospheric boundary layer model, applying the Monin-Obukov Similarity Rule obtained from measurement input data at ground level, was used to create the atmospheric boundary layer structure. In the atmospheric dispersion model, the Lagrangian Particle Model and the Markov Process were applied to calculate the trajectory of scattered carbon fibers relative to gravity and aerodynamic force, as well as carbon fibers specification.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.148-149
• /
• 2012

This paper reports doping of carbon atoms in GaN layer, which based on dimethylhydrazine (DMHy) and growth temperature. It is well known that dislocations can act as non-radiative recombination center in light emitting diode (LED). Recently, many researchers have tried to reduce the dislocation density by using various techniques such as lateral epitaxial overgrowth (LEO) [1] and patterned sapphire substrate (PSS) [2], and etc. However, LEO and PSS techniques require additional complicated steps to make masks or patterns on the substrate. Some reports also showed insertion of carbon doped layer may have good effect on crystal quality of GaN layer [3]. Here we report the growth of GaN epitaxial layer by inserting carbon doped GaN layer into GaN epitaxial layer. GaN:C layer growth was performed in metal-organic chemical vapor deposition (MOCVD) reactor, and DMHy was used as a carbon doping source. We elucidated the role of DMHy in various GaN:C growth temperature. When growth temperature of GaN decreases, the concentration of carbon increases. Hence, we also checked the carbon concentration with DMHy depending on growth temperature. Carbon concentration of conventional GaN is $1.15{\times}1016$. Carbon concentration can be achieved up to $4.68{\times}1,018$. GaN epilayer quality measured by XRD rocking curve get better with GaN:C layer insertion. FWHM of (002) was decreased from 245 arcsec to 234 arcsec and FWHM of (102) decreased from 338 arcsec to 302 arcsec. By comparing the quality of GaN:C layer inserted GaN with conventional GaN, we confirmed that GaN:C interlayer can block dislocations.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2011년도 추계학술발표대회
• /
• pp.28.1-28.1
• /
• 2011

We deposited the carbon films on Ni substrates by thermal atomic layer deposition (th-ALD), for the first time, using carbon tetrabromide ($CBr_4$) precursors and H2 reactants at two different temperatures (573 K and 673 K). Morphology of carbon films was characterized by scanning electron microscopy (SEM). The carbon films having amorphous carbon structures were analyzed by X-ray photoemission spectroscopy (XPS) and Raman spectroscopy. As the working temperature was increased from 573 K to 673 K, the intensity of C1s spectra was increased while that of O1s core spectra was reduced. That is, the purity of carbon films containing bromine (Br) atoms was increased. Also, the thin amorphous carbon films (ALD 3 cycle) were transformed to multilayer graphene segregated on Ni layer, through the post-annealing and cooling process.

• 보존과학회지
• /
• 제20권
• /
• pp.55-65
• /
• 2007

석탑 표면 흑화현상에 영향을 끼치는 탄소를 평가하기 위하여 석탑표면의 흑색층을 분석하였다. 원소분석기를 이용하여 총탄소량을 측정하였으며. 원소탄소와 유기탄소는 시료를 산처리하여 탄산염탄소를 제거한 후 OC/EC 탄소분석기를 이용하여 분석하였다. 이들 석탑 표면 흑색시료에서 검출된 원소탄소의 함량은 0.52%로 원소탄소 자체만으로 석탑 표면의 흑화현상을 설명하기에는 충분치 않은 양이나 중요한 역할을 하는 것으로 보인다. 석탑 흑색표면 내 원소탄소의 기원을 살펴보기 위해 석탑주변의 대기미세먼지 (PM-10)를 포집하여 성분을 검토하였다. 대기미세먼지 중에서 가장 높은 비율을 차지하고 있는 것은 이온성분으로 38.4%였으며 토양지각성분이 16.6%. 탄소성분이 38.4%로 측정되었다. 대기의 높은 원소탄소함량(13 wt.%)은 석탑 흑색표면에서 검출된 원소 탄소의 기원으로 판단된다. 대기중의 토양성분 또한 석탑 흑색표면이 함유하고 있는 규산염광물의 기원으로 추정되며, 석탑표면에 축적되어 표면을 어둡게 하는 역할을 한다.

• Journal of Electrical Engineering and Technology
• /
• 제6권5호
• /
• pp.688-692
• /
• 2011

Carbon nanotubes (CNTs) are vertically grown inside high-aspect-ratio vertical pores of anodized aluminum oxide. A CNT catalyst layer is introduced by atomic layer deposition to the bottom of the pores, after which the CNTs are successfully grown from the layer using chemical vapor deposition. The CNTs formed a complete vertical conductive path. The conductivity of the CNT-vertical path is also measured and discussed. The present atomic layer deposition-incorporated catalyst deposition is predicted to enable the integration of CNTs with various challenging configurations, including high-aspect-ratio vertical channels or vertical interconnects.

• 공업화학
• /
• 제33권3호
• /
• pp.315-321
• /
• 2022

We firstly observed that activated carbon (AC) deposited by atomic-layer vanadium pentoxide (V₂O₅) was used as CDI electrodes to utilize the high dielectric constant for enhancing the capacitance equipped with atomic layer deposition (ALD). It was demonstrated that the vanadium pentoxide (V₂O₅) with sub-nanometer layer was effectively deposited onto activated carbon, and the electric double-layer capacitance of the AC was improved due to an increase in the surface charge density originated from polarization, leading to high ion removal in CDI operation. It was confirmed that the performance of modified-AC increases more than 200%, comparable to that of pristine-AC under 1.5 V at 20 mL min^-1 in CDI measurements.