• 한국건축시공학회지
• /
• 제10권1호
• /
• pp.57-63
• /
• 2010

현재 우리나라 공동주택의 근간을 이루는 벽식 공동주택은 가변성의 부족, 보수 및 리모델링의 어려움으로 인하여 단수명화되고 있다. 이로 인하여 발생되는 재건축에 의한 경제적 손실 및 환경 문제는 점차 누적되어가고 있으며 이러한 문제는 앞으로 국가적 차원의 난제가 될 것으로 예상된다. 또한 국내 대표 주거공간으로 자리매김하고 있는 공동주택은 앞으로 다양한 사용자의 요구 및 생활양식의 변화를 수용할 수 있어야 한다. 따라서 평면 가변성에 제약이 있는 벽식 공동주택은 앞으로 지양되어야 하며 가변성이 확보된 새로운 형태의 신개념 공동주택의 개발이 필요한 실정이다. 본 연구의 대상이 되는 GF 공동주택은 기존 벽식 공동주택의 단점을 개선하여 공사비 절감과 공사기간 단축을 가능하게 할 것으로 예측되며, 가변성이 확보된 장수명 구조물로서 국가적으로 추진하고 있는 자원 및 에너지 절감 정책에 부응할 것으로 기대된다. 뿐만 아니라 현 정부가 추진하고 있는 저탄소 녹색성장에 발맞추어 국내 건설 산업의 지속가능한 질적 성장을 가능케 하고 기후변화 문제 해결을 위한 CO2 절감 원천기술로 자리매김할 것이다.

• 한국자기공명학회논문지
• /
• 제17권1호
• /
• pp.24-29
• /
• 2013

The structural characteristics of 4-coordinate $BO_4$ [B(1)] and 3-coordinate $BO_3$ [B(2)] groups in $BiB_3O_6$ were studied by $^{11}B$ magic angle spinning (MAS) and single-crystal nuclear magnetic resonance (NMR) spectroscopy. The spin-lattice relaxation time in the laboratory frame, $T_1$, for $^{11}B$ decreased slowly with increasing temperature, whereas the spin-lattice relaxation times in the rotating frame, $T_{1{\rho}}$, for B(1) and B(2), which differed from $T_1$, were nearly constant. Further, $T_{1{\rho}}$ for B(1) and B(2) showed very similar trends, although the $T_{1{\rho}}$ value of B(2) was shorter than that of B(1). The 3-coordinate $BO_3$ and 4-coordinate $BO_4$ were distinguished by $^{11}B$ MAS NMR spectrum and $T_{1{\rho}}$.

• 대한기계학회논문집A
• /
• 제24권11호
• /
• pp.2845-2852
• /
• 2000

When welding a car frame with one spot welding there are same limitations because many parts of it cannot be simplified by one spot welding alone. It is presented two spot welding model for the description of the spot welding which is usually used in a car frame structure. This study primarily covers fatigue behavior taking spot welded SPCC(Steel plate carbon C) with different ungget intervals as a tension shear specimen. It was prepared that intervals between two nuggets are varied as 9mm, 14mm, and 20mm respectively. The tensile tests and fatigue tests were executed to know the mechanical properties under static and fatigue load condition. In addition, the relationship between fatigue life and nugget intervals was illustrated by finite element method.

• 한국기계가공학회지
• /
• 제17권4호
• /
• pp.55-63
• /
• 2018

In recent years, with the growing interest in electric vehicles, the development of a Neighborhood Electronic Vehicle (NEV) made for urban driving is accelerating. Existing NEVs are set to ~0.3 - 0.35 with more emphasis on performance rather than minimizing air resistance. In this paper, a NEV with a streamlined car body is proposed. The shape of dolphins and sharks was applied to the car body to minimize the air resistance generated when driving. Also, the performance of the vehicle was estimated by calculating the traction force and the roll couple, etc. To check the drag coefficient of the car body, finite element analysis software (COMSOL Multiphysics) was used. The frame of the vehicle is divided into the forward and the rear parts. Carbon pipe is used for the frame by MIG welding. The car body of the vehicle was fabricated by forming carbon fiber. This study confirmed the general possibility of using NEVs through driving experiments.

• 한국화재소방학회논문지
• /
• 제14권3호
• /
• pp.13-18
• /
• 2000

본 연구의 목적은 물액적에 의한 미연소면의 냉각 특성을 연구하는 것이다. 고온고체로는 황동, 탄소강, 동을 사용하였으며 온도범위는 $70^{\circ}$~$116^{\circ}$이다. 액적의 직경은 2.4 mm~3.0 mm로 하였다. CCD카메라를 이용하여 액적의 증발과성을 기록하였으며, 증발시간은 비디오에 기록된 프레임을 분신하여 추하였다. 열전도도가 가장 큰 동의 경우 액적이 떨어진 직후 조금 냉각되었다가 일정 온도를 유지하지만 열전도도가 낯은 탄소강의 경우는 증발시간 동안 약 $1^{\circ}$ 정도의 온도 기울기가 나타났다. 고체 표면에서의 액적 증발시 무차원 액적체적은 가열체의 재질에 상관없이 무차원 증밭시간이 증가할수록 선형적으로 감소한다.

• 한국자기공명학회논문지
• /
• 제17권2호
• /
• pp.86-91
• /
• 2013

Detailed information about the structural nature of three-coordinate borons in ${\beta}-BaB_2O_4$ is obtained through $^{11}B$ MAS NMR and $^{11}B$ single-crystal NMR. The three-coordinate $BO_3$ of the two borons B(1) and B(2) in ${\beta}-BaB_2O_4$ were distinguished. The spin-lattice relaxation time in the laboratory frame $T_1$ for B(1) and B(2) slowly decreases with increasing temperature, whereas the spin-lattice relaxation time in the rotating frame $T_{1{\rho}}$ for B(1) and B(2), which differs from $T_1$, is nearly constant. The B(1) and B(2) of the two types were distinguished by $^{11}B$ MAS NMR and $^{11}B$ single-crystal NMR.

• Structural Engineering and Mechanics
• /
• 제77권6호
• /
• pp.735-744
• /
• 2021

In recent years, the use of new materials and technologies with the aim of developing high-performing and cost-effective structures has greatly increased. Application of high-strength concrete (HSC) has been found effective in reducing the dimensions of frame members; nonetheless, such reduction in dimensions of structural elements in the most cases may result in the lack of accountability in the tolerable drift capacity. On this basis, strengthening of frame members using fiber reinforced polymers (FRPs) may be deemed as an appropriate remedy to address this issue, which albeit requires comprehensive and systematic investigations. In this paper, the performance of properly-designed, two-dimensional frames made of high-strength concrete and strengthened with Carbon Fiber Reinforced Polymers (CFRPs) is investigated through detailed numerical simulation. To this end, nonlinear dynamic time history analyses have been performed using the Seismosoft software through application of five scaled earthquake ground motion records. Unstrengthened (bare) and strengthened frames have been analyzed under seismic loading for performance assessment and comparison purposes. The results and findings of this study show that use of CFRP can be quite effective in seismic response improvement of high-strength-concrete structures.

• Journal of Welding and Joining
• /
• 제33권1호
• /
• pp.49-53
• /
• 2015

An experimental study was conducted to investigate the effect of carbon nanotubes on the zinc corrosion resistance of sealing layer formed on the Tungsten Carbide spray coating. Using the nanotubes, a sealing agent in the form of solid-liquid suspensions was made and applied to the surface of spray coating. A series of experiments, consisted of three stages such as preparation of test piece, molten-pot immersion test, and evaluation of micro structure, were undertaken to demonstrate complicated interaction existing between zinc ions and sealing layer containing the nanotubes. Experimental results showed newly developed sealing layer were less susceptible to corrosion and thus coated layer was well protected even in the case of 10 days exposure. Comparison of the micro structure after molten pot test also indicated that carbon nanotubes still remained in the matrix and organized more reliable frame work constituted with boron nitride and chromium compound. It was revealed that carbon nanotubes in the sealing layer played positive role to enhance zinc corrosion resistance in the perspective of both fibrous structure and inherent chemical stability.

• 대한기계학회논문집A
• /
• 제40권2호
• /
• pp.147-156
• /
• 2016

본 연구에서는 자전거의 경량화를 위해 탄소섬유 복합재료, 유리섬유 복합재료, 케블라섬유 복합재료를 자전거 프레임의 재료로 사용하여 강도 설계 및 최적화를 수행하고 재료 성능을 비교하였다. 이를 위해 유럽표준위원회가 제시하는 자전거 안전사항을 기준으로 복합재료가 가진 이방적 특성을 활용하여 적층각 최적화와 두께 최적화를 수행하였다. 또한, 최적화된 무게, 복합재료의 강도와 비용을 바탕으로 Digital logic 방법으로 재료별 자전거 프레임의 성능을 비교하였으며 이를 통해 섬유강화복합재료를 사용한 자전거 프레임의 구조적 안정성을 확보하며 동시에 경량화를 수행할 수 있었고, 자전거 프레임에 적합한 복합재료를 선별할 수 있었다.

• Advances in nano research
• /
• 제13권3호
• /
• pp.285-295
• /
• 2022

Creation of plastic deformation under seismic loads, is one of the most serious subjects in RC structures with steel bars which reduces the life threatening risks and increases dissipation of energy. Shape memory alloy (SMA) is one of the best choice for the relocating plastic hinges. In a challenge to study the seismic response of concrete moment resisting frame (MRF), this article investigates numerically a new type of concrete frames with nano fiber reinforced polymer (NFRP) and shape memory alloy (SMA) hinges, simultaneously. The NFRP layer is containing carbon nanofibers with agglomeration based on Mori-Tanaka model. The tangential shear deformation (TASDT) is applied for modelling of the structure and the continuity boundary conditions are used for coupling of the motion equations. In SMA connections between beam and columns, since there is phase transformation, hence, the motion equations of the structure are coupled with kinetic equations of phase transformation. The Hernandez-Lagoudas theory is applied for demonstrating of pseudoelastic characteristics of SMA. The corresponding motion equations are solved by differential cubature (DC) and Newmark methods in order to obtain the peak ground acceleration (PGA) and residual drift ratio for MRF-2%. The main impact of this paper is to present the influences of the volume percent and agglomeration of nanofibers, thickness and length of the concrete frame, SMA material and NFRP layer on the PGA and drift ratio. The numerical results revealed that the with increasing the volume percent of nanofibers, the PGA is enhanced and the residual drift ratio is reduced. It is also worth to mention that PGA of concrete frame with NFRP layer containing 2% nanofibers is approximately equal to the concrete frame with steel bars.