• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2016년도 추계학술대회 논문집
• /
• pp.135-135
• /
• 2016

Recently flexible electrode materials have attracted attention in various electrical devices. In general, copper(Cu) is widely used electrical conductive material. However, Cu film showed drastically reduction of electrical conductivities under an applied tensile strain of 10%. These poor mechanical characteristics of Cu have difficulty applying in flexible electronic applications. In this study, mechanical flexibilities of Cu thin film were improved by hybridization with carbon nanotubes(CNTs) and laser sintering. First, thin carbon nanotube films were fabricated on a flexible polyethylene terephthalate(PET) substrate by using ultrasonic spray coating of CNT dispersed solution. After then, physically connected CNT-Cu NPs films were formed by utilizing ultrasonic spray coating of Cu nanoparticles dispersed solution on prepared CNT thin films. Finally, CNT-Cu thin films were firmly connected by laser sintering. Therefore, electrical stabilities under mechanical stress of CNT-Cu hybrid thin films were compared with Cu thin films fabricated under same conditions to confirm improvement of mechanical flexibilities by hybridization of CNT and Cu NPs.

• 한국전기전자재료학회논문지
• /
• 제31권3호
• /
• pp.188-192
• /
• 2018

In this study, we fabricated an $NO_X$ gas sensor using a composite film of multi-walled carbon nanotubes (MWCNT)/zinc oxide (ZnO). Carbon nanotubes (CNTs) show good electronic conductivity and chemical-stability, and zinc oxide (ZnO) is a wide band gap semiconductor with a large exciton binding energy. Gas sensors require characteristics such as high speed, sensitivity, and selectivity. The fabricated gas sensor was used to detect $NO_X$ gas at different $NO_X$ concentrations. The sensitivity of the gas sensor increased with increasing gas concentrations. Additionally, while changing the temperature inside the chamber containing the MWCNT/ZnO gas sensor, we obtained the sensitivity and normalized responses for detecting $NO_X$ gas in comparison to ZnO and MWCNT film gas sensors. From the experimental results, we confirmed that the gas sensor sensing mechanism was enhanced in the composite-film gas-sensor and that the electronic interaction between MWCNT and ZnO contributed to the improved sensor performance.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.200-200
• /
• 2012

We investigated a flexible transparent film using the spinning multi-walled carbon nanotubes (MWCNTs). Spin-capable MWCNTs on iron catalyzed on a SiO2 wafer was grown by chemical vapor deposition, which was performed at $780^{\circ}C$ using C2H2 and H2 gas. The average diameter and length of MWCNTs grown on the substrate were ~15 nm and $250{\sim}300{\mu}m$, respectively. The MWCNT sheets were produced by continuously pulling out from well-aligned MWCNTs on a substrate. The MWCNT sheet films were produced simply by direct coating on the flexible film or grass. The thickness of sheet film was remarkably decreased by alcohol spraying on the surface of sheet. The alcohol splay increased transmittance and decreased electrical resistance of MWCNT sheet films. Single and double sheets were produced with sheet resistance of ~699 and ${\sim}349{\Omega}/sq$, respectively, transmittance of 81~85 % and 67~72%, respectively. The MWCNT sheet films were heated through the application of direct current power. The flexible transparent heaters showed a rapid thermal response and uniform distribution of temperature. In addition, MWCNT yarns were prepared by spinning a bundle of MWCNTs from vertically super-aligned MWCNTs on a substrate, and field emission from the tip and side of the yarns was induced in a scanning electron microscope. We found that the field emission behavior from the tip of the yarn was better than the field emission from the side. The field emission turn-on voltages from the tip and side of MWCNT yarns were 1.6 and $1.7V/{\mu}m$, respectively, after the yarn was subjected to an aging process. Both the configuration of the tip end and the body of the yarn were changed remarkably during the field emission. We also performed the field emission of the sheet films. The sheet films showed the turn on voltage of ${\sim}1.45V/{\mu}m$ during the field emission.

• Bulletin of the Korean Chemical Society
• /
• 제30권10호
• /
• pp.2387-2392
• /
• 2009

A composite film of multi-walled carbon nanotube (MWCNT)/sol-gel-derived zinc oxide(ZnO)/Nafion has been utilized as an efficient immobilization matrix for the construction of a highly sensitive and stable tris(2,2'-bipyridyl) ruthenium(II) (Ru(${bpy)_3}^{2+})$ electrogenerated chemiluminescence (ECL) sensor. The electrochemical and ECL behaviors of Ru(${bpy)_3}^{2+})$ ion-exchanged into the composite film were strongly dependent upon the sol-gel preparation condition, the amount of MWCNT incorporated into the ZnO/Nafion composite film, and the buffer solution pH. The synergistic effect of MWCNTs and ZnO in the composite films increased not only the sensitivity but also the long-term stability of the ECL sensor. The present ECL sensor based on the MWCNT/ZnO/Nafion gave a linear response ($R^2$ = 0.999) for tripropylamine concentration from 500 nM to 1.0 mM with a remarkable detection limit (S/N = 3) of 15 nM. The present ECL sensor showed outstanding long-term stability (94% initial signal retained for 5 weeks). Since the present ECL sensor exhibits large response towards NADH, it could be applied as a transduction platform for the ECL biosensor in which the NADH is produced from the dehydrogenase-based enzymatic reaction in the presence of NA$D^+$ cofactor.

• Bulletin of the Korean Chemical Society
• /
• 제29권5호
• /
• pp.928-932
• /
• 2008

A glassy carbon electrode (GCE) modified with poly(p-aminobenzene sulfonic acid) [Poly(p-ABSA)] film is fabricated by voltammetric technique in phosphate buffer solution (pH 8.0) containing $5.0\;{\times}\;10^{-3}\;mol\;L^{-1}$p- ABSA. Electrochemical behaviors of tryptophan at the Poly(p-ABSA) film electrode are investigated with voltammetry. The results indicate that the electrochemical response of tryptophan is improved significantly in the presence of poly(p-ABSA) film. Compared with the bare glassy carbon electrode, the Poly(p-ABSA) film electrode remarkably enhances the irreversible oxidation peak current of tryptophan. Some parameters such as voltammetric sweeping segments for the electrochemical polymerization, pH, accumulation potential and accumulation time are optimized. Under the optimal conditions, the oxidation peak current is proportional to tryptophan concentration in the range of $1.0\;{\times}\;10^{-7}$ to $1.0\;{\times}\;10^{-6}\;mol\;L^{-1}$, and $2.0\;{\times}\;10^{-6}$ to $1.0\;{\times}\;10^{-5}\;mol\;L^{-1}$ with a detection limit of $7.0\;{\times}\;10^{-8}\;mol\;L^{-1}$. The proposed procedure is successfully applied to the determination of tryptophan in a commercial amino acid oral solution.

• 한국진공학회지
• /
• 제20권3호
• /
• pp.200-204
• /
• 2011

이 논문에서는 반도체의 기판으로 사용되는 Si(silicon)기판과 금속배선 물질인 Cu(copper)의 확산을 효과적으로 방지하기 위한 W(Tungsten)-C(Carbon)-N(Nitrogen) 확산방지막을 제시하였고, 시료 증착을 위하여 rf magnetron sputter를 사용하여 동일한 증착조건에서 질소(N)의 비율을 다르게 증착한 후 시료의 열적 안정성 측정을 위하여 상온에서 $800^{\circ}C$까지 각각 질소 분위기에서 30분간 열처리 과정을 실시하여 열적 손상을 인가하였다. 이후 Nanoindentation 기법을 이용하여 총 16 points에서 Elastic modulus와 Weibull distribution을 측정하였다. 그 결과 질화물질이 고온에서 물성변화가 적게 나타나는 것을 알 수 있었고, 온도변화에 따른 박막의 균일도와 결정성 또한 질화물질에서 더 안정적이었다.

• 센서학회지
• /
• 제30권4호
• /
• pp.229-235
• /
• 2021

This study presents a simple approach for the assembly of a free-standing conductive electronic nanofilm of single-walled carbon nanotubes (SWNTs) suitable for enzymatic electrochemical biosensors. A large-scale SWNT electronic film was successfully produced by the dialysis of p-Terphenyl-4,4''-dithiol (TPDT)-treated SWNTs. Furthermore, Horseradish peroxidase (HRP) was immobilized on the TPDT-SWNT electronic film, and the enzymatic detection of hydrogen peroxide (H₂O₂) was demonstrated without mediators. The detection of H₂O₂ in the negative potential range (-0.4 V vs. Ag/AgCl) was achieved by direct electron transfer of heme-based enzymes that were immobilized on the TPDT-SWNT electronic film. The SWNT-based biosensor exhibited a wide detection range of H₂O₂ from 10 µM to 10 mM. The HRP-doped SWNT electronic film achieved a high sensitivity of 342 ㎛A/mM·cm² and excellent selectivity against a variety of redox-active interfering substances, such as ascorbic acid, uric acid, and acetaminophen.

• 생물환경조절학회지
• /
• 제17권3호
• /
• pp.226-230
• /
• 2008

혼합 싹채소의 MAP에 적합한 포장재를 선발하기 위해 알팔파, 브로콜리, 양배추, 무, 그리고 적무의 혼합 싹채소를 $50{\mu}m$ 두께의 low-density polyethylene 필름(PE 50), $50{\mu}m$ 두께의 polypropylene 필름(PP 50), $50{\mu}m$ 두께의 ceramic 필름(CE 50), $25{\mu}m$ 두께 ceramic 필름(CE 25), $10\sim13{\mu}m$ 두께의 polyethylene film(wrap), 그리고 통기구가 있는 polyethylene terephthalate 박스(box)로 포장하여 $8^{\circ}C$에서 저장 비교하였다. 저장 중 혼합 싹채소의 생체중은 7%의 감소를 보인 box처리구를 제외한 모든 처리구에서 2% 미만의 감소만을 보였다. 포장재 내부 대기는 필름 종류에 따라 차이를 보였다. CE 25는 산소와 이산화탄소 모두 5% 수준이었으나, PE 50과 CE 50은 이보다 높은 이산화탄소와 낮은 산소 농도를 보였는데, 이러한 대기 조성 변화가 이들 처리구에서 가장 이취가 가장 심했던 원인이라 생각된다. 저장 10일째 포장재 내 에틸렌 농도는 box가 가장 낮았고, 다음으로 PP 50, wrap, CE 25의 순서로 높았으며 외관상 품질이 저하가 가장 심하였던 PE 50과 CE 50에서 가장 높았다. 이상의 결과를 종합할 때, 1% 미만의 생체중 감소와 5% 수준의 이산화탄소와 산소 농도, 그리고 4ppm 이하의 에틸렌 농도를 보인 CE 25가 혼합 싹채소에 가장 적합한 포장재인 것으로 나타났다.

• 한국재료학회지
• /
• 제19권10호
• /
• pp.544-549
• /
• 2009

Activated carbon (AC) with very large surface area has high capacitance per weight. However, such activation methods tend to suffer from low yields, below 50%, and are low in electrode density and capacitance per volume. Carbon NanoFibers (CNFs) had high surface area polarizability, high electrical conductivity and chemical stability, as well as extremely high mechanical strength and modulus, which make them an important material for electrochemical capacitors. The electrochemical properties of immobilized CNF electrodes were studied for use as in electrical double layer capacitor (EDLC) applications. Immobilized CNFs on Ni foam grown by thermal chemical vapor deposition (CVD) were successfully fabricated. CNFs had a uniform diameter range from 50 to 60 nm. Surface area was 56 m$^2$/g. CNF electrodes were compared with AC and multi wall carbon nanotube (MWNT) electrodes. The electrochemical performance of the various electrodes was examined with aqueous electrolyte of 2M KOH. Equivalent series resistance (ESR) of the CNF electrodes was lower than that of AC and MWNT electrodes. The specific capacitance of 47.5 F/g of the CNF electrodes was achieved with discharge current density of 1 mA/cm$^2$.

• 한국진공학회지
• /
• 제16권2호
• /
• pp.122-127
• /
• 2007

본 연구에서는 비정질 탄소박막들(a-C, a-C:H, a-C:N)을 흑연타겟이 부착되어진 비대칭 마그네트론 스퍼터링법을 이용하여 증착하였으며, 음의 DC 바이어스 전압의 효과를 알아보기 위해 증착가스 압력내에서 200 V를 인가하여 탄소박막들을 제작하였다. 수소화된 비정질 탄소박막과 질화탄소박막은 각각 스퍼터링 가스로써 아세틸렌과 질소를 주입하여 제작하였다. 결과적으로 26.5 GPa의 높은경도와 0.1 nm의 낮은 거칠기 그리고 접착력은 30.5 N를 가지는 수소화된 비정질 탄소박막을 합성하였으며, 32 N의 좋은 접착 특성을 나타내는 질화 탄소 박막을 합성하였다. 본 논문에서는 아세틸렌과 질소 가스의 효과와 음의 DC 바이어스 전압에 따른 비정질 탄소박막들의 구조적 특성과 물리적 특성과의 관계를 규명하였다.