• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2011년도 춘계학술발표대회
• /
• pp.45.2-45.2
• /
• 2011

Metal organic frameworks (MOF) have generated considerable interests as a potential candidate for hydrogen storage owing to their extremely high surface-to-volume ratio and low density. In this study, Pt nanoparticles of about 3 nm in size were introduced outside MOF-5 [$Zn_4O$(1,4-benzenedicarbocylate)3], which was then encapsulated with hydrophobic microporous carbon black (denoted CB@Pt/MOF-5) in order to enhance hydrogen uptake capacity without decreasing the specific surface area and hydrostability. To study the chemical composition, morphology, crystal information, and properties of the synthesized material, a variety of techniques is employed, including WXRD, XPS, ICP-AES, FE-SEM, HR-TEM, and N2 adsorption-desorption, confirming the formation of novel hybrid composite designated CB@Pt/MOF-5 with highly crystalline structure, large specific surface area and pore volume. In addition, $H_2$ storage capacity for resulting material was measured using magnetic suspension microbalance at 77 and 298 K under high-pressure condition, and the hydrostability was also tested by exposing the sample to 33% relative humidity at $23^{\circ}C$ and measuring XRD as a function of time.

• 분석과학
• /
• 제32권3호
• /
• pp.77-87
• /
• 2019

High viscosity carbon black dispersions are used in various industrial fields such as color cosmetics, rubber, tire, plastic and color filter ink. However, carbon black particles are unstable to heat due to inherent characteristics, and it is very difficult to keep the quality of the product constant due to agglomeration of particles. In general, particle size analysis is performed by dynamic light scattering (DLS) during the dispersion process in order to select the optimum dispersant in the carbon black dispersion process. However, the existing low viscosity analysis provides reproducible particle distribution analysis results, but it is difficult to select the optimum dispersant because it is difficult to analyze the reproducible particle distribution at high viscosity. In this study, dynamic light scattering (DLS) and asymmetrical flow field-flow fractionation (AsFlFFF) analysis methods were compared for reproducible particle size analysis of high viscosity carbon black. First, the stability of carbon black dispersion was investigated by particle size analysis by DLS and AsFlFFF according to milling time, and the validity of analytical method for the selection of the optimum dispersant useful for carbon black dispersion was confirmed. The correlation between color and particle size of particles in high viscosity carbon black dispersion was investigated by using colorimeter. The particle size distribution from AsFlFFF was consistent with the colorimetric results. As a result, the correlation between AsFlFFF and colorimetric results confirmed the possibility of a strong analytical method for determining the appropriate dispersant and milling time in high viscosity carbon black dispersions. In addition, for nanoparticles with relatively broad particle size distributions such as carbon black, AsFlFFF has been found to provide a more accurate particle size distribution than DLS. This is because AsFlFFF, unlike DLS, can analyze each fraction by separating particles by size.

• 적정기술학회지
• /
• 제6권2호
• /
• pp.219-225
• /
• 2020

터치 장비와 스마트 러닝의 중요성이 높아짐에 따라 공공 기관 및 교육시설에서는 스마트 디바이스(smart device)를 업무 및 교육 환경에 적용하는 추세이다. 그러나 공공 스마트 디바이스 사용자들은 직·간접적 감염병 확산에 노출될 위험이 있다. 본 연구는 스마트 디바이스 사용자를 위해 손가락 끝을 감싸는 외골격 장치(Exo-finger)를 개발하였으며, 공용 장비에 활용 시 질병 예방 효과를 가지고자 한다. 활성화 재료인 카본 블랙(Carbon Black, CB)과 고분자 탄성중합체(elastomer)를 혼합한 2차 재료를 금형에 넣어 외골격 장치를 제작하였다. 이 장치는 CB 함량이 0.030 wt.% 이상일 때, 터치 기능이 있는 것으로 확인되었으며 탄성중합체의 함량을 변화시켜 사람이 스마트 디바이스를 터치할 때와 유사한 마찰력(마찰계수 2.5)를 가질 수 있도록 하였다. 실험을 통하여 CB의 함유량은 마찰 계수에 주는 영향이 거의 없음을 확인하였다. 완성된 시제품을 스마트 디바이스에 테스트한 결과, 개발된 외골격 장치는 보호 장구를 착용하여 터치가 불가능한 경우 또는 감염병 확산을 막기 위해 장갑 등의 장비를 사용하는 경우에 유용하게 활용할 수 있음을 확인하였다.

• Nuclear Engineering and Technology
• /
• 제48권1호
• /
• pp.175-181
• /
• 2016

This study investigates the dispersibility of carbon in carbon contained ammonium diuranate (C-ADU) gel particles and the characteristics of C-ADU gel liquid droplets produced by the vibrating nozzle and integrated aging-washing-drying equipment. It was noted that the excellent stability of carbon dispersion was only observed in the C-ADU gel particle that contained carbon black named CB 10. ADU gel liquid droplets containing carbon particles with the excellent sphericity of approximately 1,950 mm were then obtained using an 80-100-Hz vibrating nozzle system. Dried C-ADU gel particles obtained by the aging-washing-drying equipment were thermal decomposed until $500^{\circ}C$ at a rate of $1^{\circ}C/min$ in an air or in 4% $H_2$ gas atmosphere. The thermally decomposed C-ADU gel particles showed 24% weight loss and a more complicated profile than that of ADU gel particles.

• Advances in materials Research
• /
• 제13권3호
• /
• pp.211-220
• /
• 2024

Polylactic acid or polylactide (PLA) is a biodegradable thermoplastic that can be produced from renewable material to create various components for industrial purposes. In 3D printing technology, PLA is used due to its good mechanical, electrical, printing properties, environmentally friendly and non-toxic properties. However, the physical properties and excellent electrical insulation properties of PLA have limited its application. In this study, with the carbon black (CB) as filler added into PLA, the lattice spacing and morphology were investigated by using X-ray diffraction (XRD) and scanning electron microscope (SEM), respectively. The physical properties of PLA-carbon composite were evaluated by using tensile test, shore D hardness test and density and voids measurement. Impedance test was conducted to investigate the electrical properties of PLA-Carbon composites. The results demonstrate that the inclusion of carbon black as filler enhances the physical properties of the PLA-carbon composites, including tensile properties, hardness, and density. The addition of carbon black also leads to improved electrical conductivity of the composites. Better enhancement toward the electrical properties of PLA-carbon composites is observed with 1wt% of carbon black in N774 grade. The N550 grade with 2wt% of carbon black shows better improvement in the physical properties of PLA-carbon composites, achieving 10.686 MPa in tensile testing, 43.330 in shore D hardness test, and a density of 1.200 g/cm3 in density measurement. The findings suggest that PLA-carbon composites have the potential for enhanced performance in various industrial applications, particularly in sectors requiring improved physical and electrical properties.

• 전기학회논문지
• /
• 제63권2호
• /
• pp.319-324
• /
• 2014

The wafer carrier is made of PP, PC, PE resin which have excellent heat and chemical resistance and electrical properties. However, particle generation has become a problem due to static electricity generated in the carrier. Some conductive material such as carbon black (CB) and carbon fiber (CF) are added for the purpose of anti-static, however, additional for motility and particle contamination problems due to high carbon content occurs. In this paper, the electrical characteristics and workability are observed and compared by adding low Carbon Nono Tube(CNT) to each PP, PC and PE resin to solve the problem.

• Elastomers and Composites
• /
• 제58권3호
• /
• pp.142-151
• /
• 2023

In this study, we investigate the thermal and mechanical properties of composites comprising ethylene propylene diene monomer (EPDM) and polybutadiene (PB) obtained using carbon black (CB) as a reinforcing and compatibilizing filler. Owing to the significance of elastomeric materials in various industrial applications, blending of EPDM and PB has emerged as a strategic method to optimize the material properties for specific applications. This study offers insights into the blend composition, its microstructure, and the resulting macroscopic behaviors, focusing on the synergetic effects of composite materials. Furthermore, this study delves into curing and rheological behaviors, crosslink densities, and mechanical, thermal, and elastic properties of the elastomeric composites. Through systematic exploration, we believe that this study will be beneficial to material scientists and engineers working on developing advanced elastomeric composites.

• Korean Chemical Engineering Research
• /
• 제53권6호
• /
• pp.703-708
• /
• 2015

나노충전제의 우수한 분산성을 얻기 위하여 다중벽 탄소나노튜브(multiwall carbon nanotubes) (MWCNTs)와 poly(propylene gylcol)(PPG)을 ball mill shaker로 혼합한 분산액을 이용하여 폴리우레탄(PU) 나노복합체를 제조하였다. MWCNTs는 과산화수소($H_2O_2$)로 처리하여 표면을 기능화할 수 잇었다. 순수한 MWCNTs를 이용한 PU 나노복합체와 비교한 결과 $H_2O_2$로 처리한 MWCNTs를 이용한 PU 나노복합체의 인장강도와 신율이 높게 나타났다. SEM 이미지에서 보여진 MWCNTs의 우수한 분산성은 표면을 기능화시킴으로서 얻어진 것이다. Carbon black(CB)을 사용한 PU 복합체는 기계적 물성 변화가 거의 없었다. 분산시간의 증가에 따라 PU/MWCNTs 나노복합체들의 인장물성이 상승되었다. 결과적으로 나노충전제의 분산성 향상이 PU/MWCNTs 나노복합체의 인장물성 증가를 가져온 것을 확인하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 Techno-Fair 및 합동춘계학술대회 논문집 전기물성,응용부문
• /
• pp.185-186
• /
• 2008

Use of the carbon nanotube is superior to general powder state materials of dispersion property. Because its ratio of diameter and length(aspect ratio) is very large, it has been known as a type of ideal nano-reinforcement composite. It used solution mixing method for specimen fabrication. To research dispersion property, we used FE-SEM(Field Emission Scanning Electron Microscope) and AFM(Atomic Force Microscope). As a result, this tendency confirms new conductivity network in which the carbon nanotube between carbon black constitute molecules shows a bond by similar constructive property.

• Elastomers and Composites
• /
• 제49권2호
• /
• pp.117-126
• /
• 2014

메틸렌 디이소시아네이트(MDI)가 폴리(메틸 메타크릴레이트)-개질된 전분/스티렌-부타디엔 고무(PMMA-modified starch/SBR) 복합체의 물성을 향상시키기 위하여 새로운 개질제로 조사되었다. 한쪽에는 우레탄 결합의 형성으로 인해 다른 한쪽에는 ${\pi}-{\pi}$ 접착 때문에 MDI는 PMMA-modified starch/SBR 계면에서 중간 결합 역할을 하는 것이 형태학적, 기계적, 동역학적 그리고 열적 분해 연구에 의하여 증명되었다. 결과적으로, MDI의 존재는 PMMA-modified starch/SBR 복합체의 기계적 물성과 열적 안정성을 괄목할만하게 개선하였다. 게다가, 생성된 MDI/PMMA-modified starch/SBR 복합체의 여러 가지 물성에 대한 전분 함량의 효과가 형태학, 가황 특성, 기계적 물성, 톨루엔 팽윤 거동, 그리고 열적 안정성에서 조사되었고 자세하게 논의되었다. MDI/PMMA-modified starch/SBR 복합체는 carbon black/SBR(CB/SBR) 복합체보다 우수한 물성을 보였고, 고무 배합물에서 CB의 대체물로서 재생 가능한 전분의 유력한 사용을 보여주었다.