• Journal of Ocean Engineering and Technology
• /
• v.23 no.4
• /
• pp.69-77
• /
• 2009

Structural analysis of a brake shoe for commercial vehicle was performed using finite element method. Since the strength of a brake shoe is affected by the magnitude and distribution shape of the contact pressure with the drum, the contact pressure between the shoe friction material and drum was calculated using a 2-Dimensional non-linear contact analysis in a state. And the brake was actuated by input air pressure and the drum of it was calculated both stationary and dynamic based on forced torque applied to the drum during the static state analysis. The results of the above analysis were then used as the load boundary conditions for a 3-Dimensional shoe model analysis to determine the maximum strain on the shoes. In the analysis model, the values of tensile test were used for the material properties of the brake shoes and drum, while the values of compression test were used for the friction material. We assumed it as linear variation, even though the properties of friction material were actually non-linear. The experiments were carried out under the same analysis conditions used for fatigue test and under the same brake system which equipped with a brake drum based on the actual axle state in a vehicle. The strains were measured at the same locations where the analysis was performed on the shoes. The obtained results of the experiment matched well with those from the analysis. Consequently, the model used in this study was able to determine the stress at the maximum air pressure at the braking system, thereby a modified shoe model in facilitating was satisfied with the required endurance strength in the vehicle.

• Journal of the Korean Society of Costume
• /
• v.41
• /
• pp.23-47
• /
• 1998

Ornaments is a province of the fashion. It usually express noble metals and jewel's adorn-ment as the symbol of status and riches for a long time. The ornament design of Jewels drawing project and a product by computer are increased development and as exertion as a realization of automation. Through the use of CAD software(Auto CAD R 13 & Jewel CAD) \circled1 A design development of the jewels in industrial society \circled2 A metals art & design on the dress and it's ornaments - Study about application of principle(liberal curve, arrangement of repeated form, gradual unity, rhythmical harmony) Although Auto CAD don't various expression of Jewels than a Jewel CAD, formative.scientific.funtional development of geometrical form is free. That is (to say), geometrical form is given much weigh in the general CAD, but Jewel CAD made concentrate software on the jewels design for the expression of liberal form. The CAD/CAM software for jewellery program is composed of main menu, icons, hotkeys. Changing form is derived from a definite point, curve elements of a drawing. \circled1 3-Dimensional \circled2 Easy and flexible \circled3 Bulit-in and self created library \circled4 From simple wire frame to full color images. As a CAD can practice all the creation activity effectively, from Design & Drafting Software to Rendering generally can present precise results. A point of view of the connection the scientist and art, this practicableness of CAD have a lot of possiblity of development. That will do much for the related fields of industry. Consequently, subjective intension of a creator & humanity with value plays role in practical application of the design.

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.10
• /
• pp.168-177
• /
• 2001

Reverse engineering has been widely used for the shape reconstruction of an object without CAD data and the measurement of clay or wood models fur the development of new products. To generate a surface from measured points by a laser scanner, typical steps include the scanning of a clay or wood model, the generation of compatible input curves, the generation of a surface and manufacturing data like G code or STL file. A laser scanner has a great potential to get geometrical data of a model for its frost measuring speed and higher precision. The data from a laser scanner are composed of many line stripes of points including small spikes and noise. A new approach using automated surface generating algorithm is introduced to deal with problems during reverse engineering process. And the input data and the generated surface are represented in IGES format, thus can be supplied to other CAD/CAM software without any data manipulation.

• International Journal of CAD/CAM
• /
• v.5 no.1
• /
• pp.29-38
• /
• 2005

A non-uniform 3-point ternary interpolatory subdivision scheme with variable subdivision weights is introduced. Its support is computed. The $C^0$ and $C^1$ convergence analysis are presented. To elevate its controllability, a modified edition is proposed. For every initial control point on the initial control polygon a shape weight is introduced. These weights can be used to control the shape of the corresponding subdivision curve easily and purposefully. The role of the initial shape weight is analyzed theoretically. The application of the presented schemes in designing smooth interpolatory curves and surfaces is discussed. In contrast to most conventional interpolatory subdivision scheme, the presented subdivision schemes have better locality. They can be used to generate $C^0$ or $C^1$ interpolatory subdivision curves or surfaces and control their shapes wholly or locally.

• Journal of Computational Design and Engineering
• /
• v.1 no.2
• /
• pp.116-127
• /
• 2014

This paper aims to review methods for computing orthogonal projection of points onto curves and surfaces, which are given in implicit or parametric form or as point clouds. Special emphasis is place on orthogonal projection onto conics along with reviews on orthogonal projection of points onto curves and surfaces in implicit and parametric form. Except for conics, computation methods are classified into two groups based on the core approaches: iterative and subdivision based. An extension of orthogonal projection of points to orthogonal projection of curves onto surfaces is briefly explored. Next, the discussion continues toward orthogonal projection of points onto point clouds, which spawns a different branch of algorithms in the context of orthogonal projection. The paper concludes with comments on guidance for an appropriate choice of methods for various applications.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.11 no.6
• /
• pp.1005-1013
• /
• 1987

For the factory automation and unmanned machine operation, it is very important to manufacture highly reliable and efficient chip breakers for optimal chip control. In this research, using the CALMA CAD/CAM SYSTEM, the manufacturing process of 3-dimensional chip breakers is established. Using the results of the cutting test of the selected chip breakers with double-step grooves, the chip breaking mechanism is schematically analysed. An expression for the chip breaking relation is derived which considers chip material behavior following LUDWIK's stress-strain curve, chip breaking criterion and the shape of chip breakers. This contains the thickness of chip, the radius of chip curl, and the mechanical properties of chip materials. It is found that the expression agrees very closely with the experimental results.

• Korean Journal of Computational Design and Engineering
• /
• v.9 no.3
• /
• pp.246-252
• /
• 2004

Presented in this Paper is a Micro Machining Service .(MIMS) based on the World Wide Web technologies. In order to ensure easy access to the service, the web browsers are used as the user interface. The pan geometry as an STL file is uploaded with process parameter for 3-axis CNC milling. Depending on the predefined user level, novice or expert, the user interface requires different parameters for process planning. An STL-based CAM resides in the server and automatically provides NC codes upon user's request. Tool-paths for scanning and pencil-cut, which are interference-free and precise, are created by the curve-based polyhedral machining method. A couple of sample parts were fabricated by a micro endmill with 127 fm diameter. From the tests, the parts fabricated by scanning followed by pencil-cut resulted in less error(within 2%) than the parts machined only by scanning tool-path.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.979-982
• /
• 2001

In CNC machining, demands on precision machining of free formed surface model are increasing. Most of the CAD/CAM systems provide the NURBS(Non-Uniform Rational B-Spline) interpolator. NURBS is defined with NURBS parameter by control point, weight value and knot value. This paper shows the realtime NURBS interpolation algorithms and compared with each other. One is based on the equal length of curve segments rather than equal increment of the parameter Δu. The other is to limit the interpolation error to any desired level by adjusting the feedrate considering the curvature of the shape and sampling time.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.492-495
• /
• 2001

In order to utilize a parallel machine tool for CAM system, the development of adequate interpolator is necessary. This paper presents a quintic B-spline interpolator with algorithm of limiting maximum interpolation error. The favored property of near arc-length parametrization in the curve representation is used in the implementation of the reference command generation. Then, this interpolator is applied to cubic parallel manipulator to show its validity.

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.6
• /
• pp.52-63
• /
• 1997

Non-circular gear has a good velocity ratio in high speed and heavy load without any slip, moreover, it can transmit various motion, using simpler structure than link and cam, automation mechainism. In case of designing and manufacturing non-circular gear. I suggest one of references in applying non-circular gear to industrial plant, and suitable range of application by pressure angle curvature and angle ratio